08-28-2016
Quote:
Originally Posted by
isoabv
hi,
i tried as per your request but it came up with an error below
'cpio: read error: Cannot allocate memory'
kindly assist.
I didn't request anything. I suggested that you use the same blocking factor when creating your
cpio archive on tape and when trying to read that
cpio archive from tape.
You will also need to be sure that you are reading from the same position on the tape as the position where you wrote the tape. On some systems, the device name
/dev/nst0 would specify that the tape was to be opened with
no rewind.
Note also that since you used absolute pathnames when adding files to the archive, the directory in which you are sitting when restoring those files does not matter.
So, exactly what command did you use when you created your archive and exactly what command did you use when you tried to read files from your archive? And which command gave you the diagnostic? (And, please use CODE tags when displaying all of the above!)
What operating system are you using?
What shell are you using?
This User Gave Thanks to Don Cragun For This Post:
8 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
SCO/Caldera Unixware 711
Hi Friends,
I have a cpio file which was created using relative pathnames.
the relative pathname is users/data/*
I want to restore these files to a different directory with cpio.
An example restore directory is /home/suresh
Is this possible ?
Can someone... (4 Replies)
Discussion started by: sureshy
4 Replies
2. UNIX for Dummies Questions & Answers
Hi,
I use following command to restore data from my cpio tape archive:
$cpio -icvd < /dev/rct0
But this'll restore all tape contents to the current path, what if I want only selected files from the tape, suppose I want
/home/compdir/home2/Rev83/data/PL/01/*.*
files to be restored... (8 Replies)
Discussion started by: tayyabq8
8 Replies
3. AIX
Hi all,
I am still working on my mksysb restore.
My latest issue is during an alt_disk_install from tape I got the following error after all the data had been restored.
0505-143 alt_disk_install: Unable to match mksysb level 5.2.0 with any
available boot images. Please correct this... (0 Replies)
Discussion started by: pobman
0 Replies
4. SCO
Our company purchased a spare HP ML350 server - identical to current one in use to act as minimal downtime replacement should the inevitable happen.
After install of OS 5.0.7 and restore of cpiobackup I get this message:
-: Syntax error: Hostname= $inexpected
The SCO licence policy... (4 Replies)
Discussion started by: moondogi
4 Replies
5. UNIX for Dummies Questions & Answers
Hi,
under unix aix , i had to put a catostrophic patch from an editor ...
i had first made a cpio backup
connected root
cd /application
find . –print | cpio –ocvBm > /sauvegarde/sauvegarde.cpio
Does someone know the command to restore my cpio backup ?
thanks in advandce to everyone
... (7 Replies)
Discussion started by: bzh35
7 Replies
6. UNIX for Dummies Questions & Answers
Hello Every one,
I want to back up all passwd files to /xyz/passfiles.cpio
and Then restore them to /abc directory.
Here is what I wrote:
find / -name passwd | cpio -oc > /tmp/passwd.cpio
and to restore
cd abc
cpio -ium < /tmp/passwd.cpio
I can not find the files restored to /abc... (2 Replies)
Discussion started by: drdigital_m
2 Replies
7. UNIX for Beginners Questions & Answers
Hello folks, one of the RAID drives in our SCO system crashed recently and being hot swap it was replaced.
Problem was that on boot it stops at:
Checking protected password and protected subsystem databases....
First I did #authck -a and checked /etc/auth/system/ttys as per instructions in a... (7 Replies)
Discussion started by: Redstar
7 Replies
8. UNIX for Advanced & Expert Users
Due to budget constraints I have to reinvent an Enterprise backup system in a SPARC (sun4v) Solaris estate (10 & 11). (yep - reinvent wheel, fun but time consuming. Is this wise?! :confused: )
For each filesystem of interest, to try to capture a 'catalog' at the front of each cpio archive (for... (1 Reply)
Discussion started by: am115998
1 Replies
backup(1M) backup(1M)
NAME
backup - backup or archive file system
SYNOPSIS
[-archive]
DESCRIPTION
The command uses find(1) and cpio(1) to save a archive of all files that have been modified since the modification time of on the default
tape drive should be invoked periodically to ensure adequate file backup.
The option suppresses warning messages regarding optional access control list entries. backup(1M) does not backup optional access control
list entries in a file's access control list (see acl(5)). Normally, a warning message is printed for each file having optional access
control list entries.
The option causes backup to save all files, regardless of their modification date, and then update using touch(1).
prompts you to mount a new tape and continue if there is no more room on the current tape. Note that this prompting does not occur if you
are running from cron(1M).
The option causes to start a file system consistency check (without correction) after the backup is complete. For correct results, it is
important that the system be effectively single-user while is running, especially if is allowed to automatically fix whatever inconsisten-
cies it finds. does not ensure that the system is single-user.
You can edit to customize it for your system. Several local values are used that can be customized:
specifies which directories to back up recursively (usually
meaning all directories);
file name where start and finish times, block counts, and error messages
are logged;
file name whose date is the date of the last archive;
file name that is checked by
to remind the next person who logs in to change the backup tape;
file name where start and finish times and
output is logged.
You may want to make other changes, such as whether or not does automatic correction (according to its arguments), where output is
directed, other information logging, etc.
In all cases, the output from is a normal archive file (or volume) which can be read using with the option.
File Recovery
creates archive tapes with all files and directories specified relative to the root directory. When recovering files from an archive tape
created by you should be in the root directory and specify the directory path names for recovered files relative to the root directory When
specifying the directory path name for file recovery by do not precede the leading directory name with a slash. If you prefer, you can
also use with a option to determine how files and directories are named on the archive tape before attempting recovery.
WARNINGS
Refer to in cpio(1).
When runs out of tape, it sends an error to standard error and demands a new special file name from
To continue, rewind the tape, mount the new tape, type the name of the new special file at the system console, and press
If is being run unattended from cron(1M) and the tape runs out, terminates, leaving the process still waiting. Kill this process when you
return.
FILES
parameterized file names
SEE ALSO
cpio(1), find(1), touch(1), cron(1M), fbackup(1M), frecover(1M), fsck(1M), acl(5).
backup(1M)