05-22-2016
What do you need from the CD/DVD? There is a "Tools and Drivers" patch available for download from MOS but it only contains a firmware update for the ILOM and nothing more... If you need drivers for any other OS, the drivers of the X4200M2 server might work as it has the same mainboard. I was not able to find any information about that but if nothing else work, it might be worth a try?!
Last edited by DukeNuke2; 05-22-2016 at 05:01 AM..
9 More Discussions You Might Find Interesting
1. Solaris
Hello, I'm trying to fix this server System Board (CPU/Memory Unit). The error indicates that its missing 3.3VDC. So far all the fuses and caps have been checked. I new at this type of machine, need help for idea on this system. Thank you in advance.
Vu (0 Replies)
Discussion started by: vhtran
0 Replies
2. Solaris
so i've grabbed this sun netra t1 for some small dev work. now obviously i need to install sol10. no problem done it a million times except for the fact that i've never actually done it w/o a term server. so i grab a usb to serial and a serial to rj45 (the one you get in every cisco order.. roll... (24 Replies)
Discussion started by: pupp
24 Replies
3. Solaris
Hi guys. I have an old Netra T1 that I'm hoping to recover here so I can twiddle around with Solaris 10.
It's been unable to power on despite issuing the "poweron" command or hitting the switch at the back of the server for some time. The LOM command "env" reports ALARM3 ON and everything else... (8 Replies)
Discussion started by: detach8
8 Replies
4. Solaris
Hi,
When I am trying to boot my SUN Netra 240 Machine its giving some boot error.
> {1} ok boot -i
> Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args: -i
> Boot load failed.
> The file just loaded does not appear to be executable.
> {1} ok
I tried to boot it from cdrom... (9 Replies)
Discussion started by: ppandey21
9 Replies
5. Hardware
As the title suggests, I'm trying to install a second drive (really want an OS mirror) on a Sun Netra X1.
I've taken the spacer out, and had a go at with the drill-press so now I have a nice HDD tray. Have installed an IDE drive in the tray, plugged in the power and data cables that were... (0 Replies)
Discussion started by: Smiling Dragon
0 Replies
6. Hardware
I recently required some Sun Oracle Netra T5220s. I do not have much knowledge of Sun products.
The units do not have video cards or hard drives. How can I tell/go about figuring out what clock speed and how many cores the processor is?
They are all outfitted with 32GB of memory. Two are... (11 Replies)
Discussion started by: nerdboy
11 Replies
7. Solaris
Hello all,
I recently powered on my Netra AX1105 server only to be greeted with the following error message. I am not sure what to do here,
I cant fun fsck on OK prompt.. did ok>boot -r and now it keeps booting from net, then I run ok>boot disk then outputs the following message... and keeps... (3 Replies)
Discussion started by: br1an
3 Replies
8. Solaris
Good day.
I have a SUN Netra X4200 running on Solaris 10, with two disks in raid 1 configuration. HDD0 (c2t0d0) seems to have a problem but HDD1 (c2t1d0) is ok:
# for a in c2t0d0 c2t1d0 ; do raidctl -l $a; done
Volume Size Stripe Status Cache RAID
Sub ... (5 Replies)
Discussion started by: BRH
5 Replies
9. Hardware
Hello,
I have a spare SUN server X4200 with a DC PSU (oracle part number 300-2186)
The PSU is the one in the photo
I was looking in the net about what cable i can order but i couldn't find anything that fit there :)
Any idea?
Thanks! (2 Replies)
Discussion started by: @dagio
2 Replies
LEARN ABOUT MOJAVE
cupsaddsmb
cupsaddsmb(8) Apple Inc. cupsaddsmb(8)
NAME
cupsaddsmb - export printers to samba for windows clients
SYNOPSIS
cupsaddsmb [ -H samba-server ] [ -U samba-user[%samba-password] ] [ -h cups-server[:port] ] [ -v ] -a
cupsaddsmb [ -H samba-server ] [ -U samba-user[%samba-password] ] [ -h cups-server[:port] ] [ -v ] printer [ ... printer ]
DESCRIPTION
The cupsaddsmb program exports printers to the SAMBA software (version 2.2.0 or higher) for use with Windows clients. Depending on the
SAMBA configuration, you may need to provide a password to export the printers. This program requires the Windows printer driver files
described below.
SAMBA CONFIGURATION
cupsaddsmb uses the RPC-based printing support in SAMBA to provide printer drivers and PPD files to Windows client machines. In order to
use this functionality, you must first configure the SAMBA smb.conf(5) file to support printing through CUPS and provide a printer driver
download share, as follows:
[global]
load printers = yes
printing = cups
printcap name = cups
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
public = yes
guest ok = yes
writable = no
printable = yes
[print$]
comment = Printer Drivers
path = /etc/samba/drivers
browseable = yes
guest ok = no
read only = yes
write list = root
This configuration assumes a FHS-compliant installation of SAMBA; adjust the [printers] and [print$] share paths accordingly on your system
as needed.
MICROSOFT POSTSCRIPT DRIVERS FOR WINDOWS
The base driver for Windows 2000 and higher is the Microsoft PostScript driver, which is available on any system running Windows 2000 or
higher in the %WINDIR%SYSTEM32SPOOLDRIVERSW32X863 folder for 32-bit drivers and %WINDIR%SYSTEM32SPOOLDRIVERSX643 folder for
64-bit drivers.
Copy the 32-bit drivers to the /usr/share/cups/drivers directory and the 64-bit drivers to the /usr/share/cups/drivers/x64 directory
exactly as named below:
ps5ui.dll
pscript.hlp
pscript.ntf
pscript5.dll
Note: Unlike Windows, case is significant - make sure that you use the lowercase filenames shown above, otherwise cupsaddsmb will fail to
export the drivers.
OPTIONS
cupsaddsmb supports the following options:
-H samba-server
Specifies the SAMBA server which defaults to the CUPS server.
-U samba-user[%samba-password]
Specifies the SAMBA print admin username which defaults to your current username. If the username contains a percent (%) character,
then the text following the percent is treated as the SAMBA password to use.
-a Exports all known printers. Otherwise only the named printers are exported.
-h cups-server[:port]
Specifies a different CUPS server to use.
-v Specifies that verbose information should be shown. This is useful for debugging SAMBA configuration problems.
SEE ALSO
rpcclient(1), smbclient(1), smbd(8), smb.conf(5), CUPS Online Help (http://localhost:631/help)
COPYRIGHT
Copyright (C) 2007-2017 by Apple Inc.
11 June 2014 CUPS cupsaddsmb(8)