05-22-2016
What do you need from the CD/DVD? There is a "Tools and Drivers" patch available for download from MOS but it only contains a firmware update for the ILOM and nothing more... If you need drivers for any other OS, the drivers of the X4200M2 server might work as it has the same mainboard. I was not able to find any information about that but if nothing else work, it might be worth a try?!
Last edited by DukeNuke2; 05-22-2016 at 05:01 AM..
9 More Discussions You Might Find Interesting
1. Solaris
Hello, I'm trying to fix this server System Board (CPU/Memory Unit). The error indicates that its missing 3.3VDC. So far all the fuses and caps have been checked. I new at this type of machine, need help for idea on this system. Thank you in advance.
Vu (0 Replies)
Discussion started by: vhtran
0 Replies
2. Solaris
so i've grabbed this sun netra t1 for some small dev work. now obviously i need to install sol10. no problem done it a million times except for the fact that i've never actually done it w/o a term server. so i grab a usb to serial and a serial to rj45 (the one you get in every cisco order.. roll... (24 Replies)
Discussion started by: pupp
24 Replies
3. Solaris
Hi guys. I have an old Netra T1 that I'm hoping to recover here so I can twiddle around with Solaris 10.
It's been unable to power on despite issuing the "poweron" command or hitting the switch at the back of the server for some time. The LOM command "env" reports ALARM3 ON and everything else... (8 Replies)
Discussion started by: detach8
8 Replies
4. Solaris
Hi,
When I am trying to boot my SUN Netra 240 Machine its giving some boot error.
> {1} ok boot -i
> Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args: -i
> Boot load failed.
> The file just loaded does not appear to be executable.
> {1} ok
I tried to boot it from cdrom... (9 Replies)
Discussion started by: ppandey21
9 Replies
5. Hardware
As the title suggests, I'm trying to install a second drive (really want an OS mirror) on a Sun Netra X1.
I've taken the spacer out, and had a go at with the drill-press so now I have a nice HDD tray. Have installed an IDE drive in the tray, plugged in the power and data cables that were... (0 Replies)
Discussion started by: Smiling Dragon
0 Replies
6. Hardware
I recently required some Sun Oracle Netra T5220s. I do not have much knowledge of Sun products.
The units do not have video cards or hard drives. How can I tell/go about figuring out what clock speed and how many cores the processor is?
They are all outfitted with 32GB of memory. Two are... (11 Replies)
Discussion started by: nerdboy
11 Replies
7. Solaris
Hello all,
I recently powered on my Netra AX1105 server only to be greeted with the following error message. I am not sure what to do here,
I cant fun fsck on OK prompt.. did ok>boot -r and now it keeps booting from net, then I run ok>boot disk then outputs the following message... and keeps... (3 Replies)
Discussion started by: br1an
3 Replies
8. Solaris
Good day.
I have a SUN Netra X4200 running on Solaris 10, with two disks in raid 1 configuration. HDD0 (c2t0d0) seems to have a problem but HDD1 (c2t1d0) is ok:
# for a in c2t0d0 c2t1d0 ; do raidctl -l $a; done
Volume Size Stripe Status Cache RAID
Sub ... (5 Replies)
Discussion started by: BRH
5 Replies
9. Hardware
Hello,
I have a spare SUN server X4200 with a DC PSU (oracle part number 300-2186)
The PSU is the one in the photo
I was looking in the net about what cable i can order but i couldn't find anything that fit there :)
Any idea?
Thanks! (2 Replies)
Discussion started by: @dagio
2 Replies
LEARN ABOUT CENTOS
ras-mc-ctl
RAS-MC-CTL(8) RAS memory controller admin utility RAS-MC-CTL(8)
NAME
ras-mc-ctl - RAS memory controller admin utility
SYNOPSIS
ras-mc-ctl [OPTION]...
DESCRIPTION
The ras-mc-ctl program is a perl(1) script which performs some useful RAS administration tasks on EDAC (Error Detection and Correction)
drivers.
OPTIONS
--help Display a brief usage message.
--mainboard
Print mainboard vendor and model for this hardware, if available. The method used by ras-mc-ctl to obtain the mainboard vendor and
model information for the current system is described below in the MAINBOARD CONFIGURATION section.
--status
Print the status of EDAC drivers (loaded or unloaded).
--quiet
Be less verbose when executing an operation.
--register-labels
Register motherboard DIMM labels into EDAC driver sysfs files. This option uses the detected mainboard manufacturer and model num-
ber in combination with a "labels database" found in any of the files under /etc/ras/dimm_labels.d/* or in the labels.db file at
/etc/ras/dimm_labels.db. An entry for the current hardware must exist in the labels database for this option to do anything.
--print-labels
Display the configured labels for the current hardware, as well as the current labels registered with EDAC.
--guess-labels
Print DMI labels, when bank locator is available at the DMI table. It helps to fill the labels database at /etc/ras/dimm_labels.d/.
--labeldb=DB
Specify an alternate location for the labels database.
--delay=time
Specify a delay of ime seconds before registering dimm labels. Only meaninful if used together with --register-labels.
--layout
Prints the memory layout as detected by the EDAC driver. Useful to check if the EDAC driver is properly detecting the memory con-
troller architecture.
MAINBOARD CONFIGURATION
The ras-mc-ctl script uses the following method to determine the current system's mainboard vendor and model information:
1. If the config file /etc/edac/mainboard exists, then it is parsed by ras-mc-ctl. The mainboard config file has the following simple syn-
tax:
vendor = <mainboard vendor string>
model = <mainboard model string>
script = <script to gather mainboard information>
Where anything after a '#' character on a line is considered a comment. If the keyword script is specified, then that script or exe-
cutable is run by ras-mc-ctl to gather the mainboard vendor and model information. The script should write the resulting information on
stdout in the same format as the mainboard config file.
2. If no mainboard config file exists, then ras-mc-ctl will attempt to read DMI information from the sysfs files
/sys/class/dmi/id/board_vendor
/sys/class/dmi/id/board_name
3. If the sysfs files above do not exist, then ras-mc-ctl will fall back to parsing output of the dmidecode(8) utility. Use of this util-
ity will most often require that ras-mc-ctl be run as root.
SEE ALSO
fBrasdaemon(1)
RAS-MC-CTL(8)