04-25-2016
Yes, a complete restart.
Somehow, based on the owner of the original (in use) job for the tape, leads me to think something a start-up is trying to use the tape drive.
When you restart, you may want to make sure a tape is not in the drive. (Just in case there is something in the start routines.)
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
/dev/rmt/0: No such device or address
I get this when I do a "mt -f /dev/rmt/0 rewind"
This is on a Solaris 7 system.
I tried
devfsadm -c tape
and
drvconfig ; tape
and both didn't work.
Help please....... :confused: (4 Replies)
Discussion started by: shorty
4 Replies
2. UNIX for Dummies Questions & Answers
Hello guys,
on my Red Hat machine the /bin/mt status command gives the output dev/tape: inappropriate ioctl for device. This messages comes up after the Server has been rebooted.
Anybody an idea?
Thx
masterofdesaster (8 Replies)
Discussion started by: masterofdesaste
8 Replies
3. UNIX Desktop Questions & Answers
Ciao a tutti!!!
il mio problema è questo: sto cercando di inviare dei comandi AT da PC a cellulare utilizzando il bluetooth e cygwin e vorrei visualizzare le risposte nella shell bash. Per farlo apro due terminali utilizzando le seguente istruzioni:
xterm &
Sul primo scrivo
cat /dev/ttyS2
... (0 Replies)
Discussion started by: blianna
0 Replies
4. UNIX and Linux Applications
Ciao a tutti!!!
il mio problema è questo: sto cercando di inviare dei comandi AT da PC a cellulare utilizzando il bluetooth e cygwin e vorrei visualizzare le risposte nella shell bash. Per farlo apro due terminali utilizzando le seguente istruzioni:
xterm &
Sul primo scrivo
cat /dev/ttyS2
... (1 Reply)
Discussion started by: blianna
1 Replies
5. SuSE
Dear all,
we are running SLES 11 where an iscsi tape library is
attached. To load the tape in a slot we are using for
instance the command #mtx -f /dev/sg1 load 2 which is doing
very well.
But after a server's reboot the device name of the loader is now
/dev/sg4 or /dev/sg5 I mean it is... (1 Reply)
Discussion started by: xunil321
1 Replies
6. Solaris
I have an HP Proliant DL380 with Intel Processors that I recently loaded Solaris 10 with latest patches on it. I'm trying to do a ufsdump to an HP DAT 40 tape drive via SCSI, but I can't get it to do anything because /dev/rmt is empty. I've tried the following with luck:
touch /reconfigure,... (7 Replies)
Discussion started by: cvaughn
7 Replies
7. Hardware
# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected or reserved.
Getting error while ufsdump ....
--- Dumping / to /dev/rmt/0mn ---
DUMP: Date... (1 Reply)
Discussion started by: vickyingle5
1 Replies
8. Solaris
# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected or reserved.
Getting error while ufsdump ....
--- Dumping / to /dev/rmt/0mn ---
DUMP: Date... (5 Replies)
Discussion started by: vickyingle5
5 Replies
9. Hardware
hello to everybody
I have Ubuntu Lucid 10.04 installed on my Desktop and I have a PCI serial card in my computer and it has only one serial port.
Actually I want to use this serial port for the serial communication and for that I executed this command :
$ setserial -g /dev/ttyS
and I... (0 Replies)
Discussion started by: piyush011
0 Replies
10. UNIX for Advanced & Expert Users
Is there a trick to mounting swap in n a lvm? I can't get it to work.
# swapon -va
swapon on /dev/mapper/VG-lv_swap
swapon: /dev/mapper/VG-lv_swap: found swap signature: version 1, page-size 4, same byte order
swapon: /dev/mapper/VG-lv_swap: pagesize=4096, swapsize=4294967296,... (1 Reply)
Discussion started by: cokedude
1 Replies
TS(4) Kernel Interfaces Manual TS(4)
NAME
ts - TS-11 magtape interface
SYNOPSIS
/sys/conf/SYSTEM:
NTS ts_drives # TS11
/etc/dtab:
#Name Unit# Addr Vector Br Handler(s) # Comments
ts ? 172520 224 5 tsintr # ts11 driver
major device number(s):
raw: 8
block: 2
minor device encoding:
bits 0003 specify TS drive
bit 0004 specifies no-rewind operation
bit 0010 ignored
DESCRIPTION
The ts-11 combination provides a standard tape drive interface as described in mtio(4). The ts-11 operates only at 1600 bpi, and only one
transport is possible per controller.
FILES
/dev/MAKEDEV script to create special files
/dev/MAKEDEV.local script to localize special files
SEE ALSO
mt(1), tar(1), tp(1), mtio(4), ht(4), tm(4), dtab(5), autoconfig(8)
DIAGNOSTICS
ts%d: no write ring. An attempt was made to write on the tape drive when no write ring was present; this message is written on the termi-
nal of the user who tried to access the tape.
ts%d: not online. An attempt was made to access the tape while it was offline; this message is written on the terminal of the user who
tried to access the tape.
ts%d: hard error bn%d xs0=%b xs1=%b xs2=%b xs3=%b. A hard error occurred on the tape at block bn; status registers 0-3 are printed in
octal and symbolically decoded as bits.
ts%d: addr mod 4 != 0. The address of a TS-11 command packet was not on an even longword boundary.
BUGS
If any non-data error is encountered on non-raw tape, it refuses to do anything more until closed.
The device lives at the same address as a tm-11 tm(4).
3rd Berkeley Distribution January 28, 1988 TS(4)