Solaris not booting with new BE after performing Liveupgrade. Post: 302968631

7 More Discussions You Might Find Interesting

1. Solaris

Solairs 9 to Solaris 10 liveupgrade issue

Hello, I started the upgrade using LiveUpgrade. I am using Solaris 10 instalation CDs (5 CDs). My server is Enterprise 3500 - SPARC. 1) lucreate -c first_disk -m /:/dev/dsk/c0t11d0s7:ufs -n second_disk ... luupgrade -u -n second_disk -s /cdrom/cdrom0/s0 WARNING: <5> packages failed to...

2. Solaris

Solaris m/c not booting

My Solaris machine is not booting.It just stops at the point Boot device: /pci@1e,600000/ide@d/disk@0,0:a File and args: Whether i try boot or boot -s it is stopping at this point.. I tried boot cdom -s.It went into single user mode but I am not able to run a fsck in this mode. Right...

3. Solaris

solaris 10 liveupgrade issues

I got this output from a system running solaris 10 : # lustatus BE_name Complete Active ActiveOnReboot CopyStatus -------------------------------------------------------------------------------- oldvol yes yes yes - newvol no no no - bigvol no no no - # How do i remove (or...

4. Solaris

Solaris liveupgrade will NOT boot into new BE

OK, latest in a loooong trail of errors with no information. I've finally gotten a new BE created on another drive, run liveupgrade on it to bring it from sol10u3 to sol10u8 I luactivate sol10u8 lustatus shows the sol10u8 as the active one init 6 system just starts into 10u3 again. I'm...

5. UNIX for Dummies Questions & Answers

Help with booting Solaris 9

Folks; I have a Solaris 9 server that after power outage it won't come fully up and i was able to bring it up in single user mode and checked "/var/log/messages" & "/var/adm/messages" with nothing showing since Sept. 17. i ran fsck and no luck. I ran all tests from the OK prompt with no luck...

6. Solaris

Booting Solaris 10/09

What type of communication does Solaris 10/09 need to do with it's default gateway before it can boot up?

7. Solaris

Solaris 10 liveupgrade/ABE advice

Hi all, I have got a few questions on the above topic -> q1) if my intention for creating an ABE is just to use for patching / patchset update - e.g. ./installpatchset -B secondboot --s10patchset luactivate secondboot What is the recommendation that my ABE should consist of ?...

LEARN ABOUT MINIX

reboot

REBOOT(8)						      System Manager's Manual							 REBOOT(8)

NAME

       reboot - reboot the system immediately

SYNOPSIS

       reboot [-f]

DESCRIPTION

       Reboot  can  be	used  to  reboot  the  system  after  installing a new kernel.	It does not inform the users, but does log it's actions in
       /usr/adm/wtmp and /usr/adm/authlog.  The system is then rebooted with the reboot(2) systemcall.

       If the -f flag is not given then all processes are sent terminate signals to give them a chance to die peacefully before the reboot() call.

       If the wtmp file exists, reboot logs itself as if it were a shutdown.  This is done to prevent last(1) from talking  about  system-crashes.
       Reboot is registered as is in the authlog file.

       Reboot can only be executed by the super-user.  Any other caller will be refused, either by reboot(8) or by reboot(2).

SEE ALSO

       reboot(2), shutdown(8), halt(8), boot(8).

BUGS

       The  error message's given by reboot are not always useful.  There are several routines that can fail, but which are not fatal for the pro-
       gram.

AUTHOR

       Edvard Tuinder (v892231@si.hhs.NL)

																	 REBOOT(8)