Does this mean the remote server is up? At least ping sent three packets, zero loss. But is it on air?
.
.
.
ping transmitted three packets but didn't receive any: 100% packet loss, not zero!
It doesn't seem to be "on air" unless those packets are intercepted by some firewall.
I can ping other computers in my office. I can telnet other users in my office but i cannot get out of the office network. If i try to go out side of my network it cannot find host.
Any ideas? (5 Replies)
Hi,
Can anybody help me out why l can't not ping my server with Openserver 5.0.4 with my windows machine from a remote site.
The machine could see the local LAN with the Router however, i can't ping or telnet unto the server from another site on the WAN. The default gateway was configure on the... (0 Replies)
Hi All,
We are not able to ping to a AIX box...Network is ok..when we give ping from that AIX box..it is giving 0821-067 ping: The socket creation call failed.there is no enough buffer space for the requested socket operation.
refresh -s inetd is also giving socket error.
Please help to... (1 Reply)
I have one problem and it is giving me hard time
I can ping my windows machine
root@x1ChXpress:/sbin
>ping 192.168.129.66
192.168.129.66 is alive
root@x1ChXpress:/sbin
>netstat -rn
Routing Table:
Destination Gateway Flags Ref Use Interface... (3 Replies)
I have two redhat linux server. i have created one script which contain some command that run on Local server as well as remote server.I am using this command to connect to remote server
ssh user1@192.x.x.x 'command'
but when i am running the script in local server it connecting to the server... (1 Reply)
We have a Sun Solaris Netra 20 server. Our O&M Server gets Alarm Processor
not responding. When Alarm occurs, you can ping the sun server but cannot telnet it. We keep getting Interrupt level not serviced. var/adm/message log is
> tail -f messages
Apr 12 20:09:56 cama pcisch: PCI-device:... (9 Replies)
Hi all,
I am not sure if my problem is specific to HP-UX or not. Hopefully someone can tell me what's wrong.
I have a server name server1 10.100.50.10 in the /etc/hosts file and if I do a ping server1, it shows the right IP address.
However, if I run telnet server1, it is not using... (4 Replies)
Hi,
After a crash of our older AIX server it happend as it is in the title:
ping is ok, but telnet:
What it can be this strange thing?
Franci (2 Replies)
Hello,
I need help, I have the following which save in the result file ping and telnet:port test.
Basically the script works but I should implement a check on ping and telnet command so that ping has 5 seconds threshold and telnet (more important) 10 seconds. Over that threshold ping and... (0 Replies)
Discussion started by: marmellata
0 Replies
LEARN ABOUT MOJAVE
simple
Simple action in tc(8) Linux Simple action in tc(8)NAME
simple - basic example action
SYNOPSIS
tc ... action simple [ sdata STRING ] [ index INDEX ] [ CONTROL ]
CONTROL := { reclassify | pipe | drop | continue | ok }
DESCRIPTION
This is a pedagogical example rather than an actually useful action. Upon every access, it prints the given STRING which may be of arbi-
trary length.
OPTIONS
sdata STRING
The actual string to print.
index INDEX
Optional action index value.
CONTROL
Indicate how tc should proceed after executing the action. For a description of the possible CONTROL values, see tc-actions(8).
EXAMPLES
The following example makes the kernel yell "Incoming ICMP!" every time it sees an incoming ICMP on eth0. Steps are:
1) Add an ingress qdisc point to eth0
2) Start a chain on ingress of eth0 that first matches ICMP then invokes the simple action to shout.
3) display stats and show that no packet has been seen by the action
4) Send one ping packet to google (expect to receive a response back)
5) grep the logs to see the logged message
6) display stats again and observe increment by 1
hadi@noma1:$ tc qdisc add dev eth0 ingress
hadi@noma1:$tc filter add dev eth0 parent ffff: protocol ip prio 5
u32 match ip protocol 1 0xff flowid 1:1 action simple sdata "Incoming ICMP"
hadi@noma1:$ sudo tc -s filter ls dev eth0 parent ffff:
filter protocol ip pref 5 u32
filter protocol ip pref 5 u32 fh 800: ht divisor 1
filter protocol ip pref 5 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1
match 00010000/00ff0000 at 8
action order 1: Simple <Incoming ICMP>
index 4 ref 1 bind 1 installed 29 sec used 29 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
hadi@noma1$ ping -c 1 www.google.ca
PING www.google.ca (74.125.225.120) 56(84) bytes of data.
64 bytes from ord08s08-in-f24.1e100.net (74.125.225.120): icmp_req=1 ttl=53 time=31.3 ms
--- www.google.ca ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 31.316/31.316/31.316/0.000 ms
hadi@noma1$ dmesg | grep simple
[135354.473951] simple: Incoming ICMP_1
hadi@noma1$ sudo tc/tc -s filter ls dev eth0 parent ffff:
filter protocol ip pref 5 u32
filter protocol ip pref 5 u32 fh 800: ht divisor 1
filter protocol ip pref 5 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1
match 00010000/00ff0000 at 8
action order 1: Simple <Incoming ICMP>
index 4 ref 1 bind 1 installed 206 sec used 67 sec
Action statistics:
Sent 84 bytes 1 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
SEE ALSO tc(8)tc-actions(8)iproute2 12 Jan 2015 Simple action in tc(8)