10-01-2015
Quote:
The network card has a mac address, the cpu has a serial number. Of course if the network card is on board then effectively the software is tied to the motherboard. What version of Basis, I have version 1.06 dated June 98.
Well, I am certain the software is not tied to CPU or motherboard as the motherboard on the old server failed and I have already moved HD to another Server and it booted and worked.
After I verified it worked with the replacement MB and CPU, just for the heck of it, I took the CPU and Memory out of the old MB and put in the replacement server to make a powerful Dual Processor 800 Mhz PIII machine with 500 MB ram and 9 GB HD.
It is the common HP E800 server.
9 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
Help, if possible.
In SCO Open Server with installation of two-channel RAID controller the following happens: on the channel 0 disk array is seen by an operational system, and on the channel 1 array is not seen (simultaneously). That is the operational system can not simultaneously use more than... (1 Reply)
Discussion started by: pko60
1 Replies
2. Filesystems, Disks and Memory
Hi,
I have a server that I am adding a RAID that we purchased to. The server works fine. It is running Fedora 7 and is a Dell Precision 690.
When the RAID is attached, it boots up and says the following:
Controller Bus #00, Device#1F, Function#02: 00 Ports
No device found
AHCI BIOS not... (0 Replies)
Discussion started by: user23
0 Replies
3. Red Hat
I am planning on building a fedora box with raid controller (database server).
Is anybody done that ? also what kind of software do you need to backup and recover data. (1 Reply)
Discussion started by: amir07
1 Replies
4. UNIX for Dummies Questions & Answers
I need to put together a RAID1 file server for use by Windoze systems. I've built zillions of windows systems from components. I was a HPUX SE for a long time at HP, but have been out of the game for years.
I've got an old workhorse mobo FIC PA-2013 with a 450 MHz K6 III+ I could use, but I'd... (2 Replies)
Discussion started by: pcmacd
2 Replies
5. Hardware
Hi All
I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command.
Following is the hardware RAID output.
root@oracledatabaseserver / $ raidctl
RAID Volume RAID RAID Disk... (0 Replies)
Discussion started by: Tirmazi
0 Replies
6. Hardware
Hi guys.
if we want to use SSD drives on a database server, can we use RAID 0 configuration because of their reliability? (3 Replies)
Discussion started by: majid.merkava
3 Replies
7. Linux
I just built a home computer with 3TB hard drives I wanted to set up in a RAID 5 and load Ubuntu server onto it.
The first thing I did was set up the drives in a RAID 5 using just the motherboard chipset software to do it, so a 'hardware' RAID basically.
I installed Windows first to see if... (2 Replies)
Discussion started by: lorewap3
2 Replies
8. Filesystems, Disks and Memory
First time poster and a very new Unix user, so I'll just pre-apologize for stupid questions now.
Does anybody know of a good RAID 1 hard drive backup that is Unix friendly? I want to avoid any hardcore programming. Can you recommend both NAS and non-NAS options? I need to do nightly backups... (31 Replies)
Discussion started by: c.wakeman
31 Replies
9. Hardware
We have a 3ware RAID server at work, and as the appointed systems administrator (by virtue of being the one with the most knowledge) I've taken on the job of maintaining it. I've installed smartmontools on it to keep an eye on the drives and run scans every day, and looking at the data from the... (0 Replies)
Discussion started by: Krendoshazin
0 Replies
LEARN ABOUT NETBSD
cpuset_clr
CPUSET(3) BSD Library Functions Manual CPUSET(3)
NAME
cpuset_create, cpuset_destroy, cpuset_zero, cpuset_set, cpuset_clr, cpuset_isset, cpuset_size -- dynamic CPU sets
SYNOPSIS
#include <sched.h>
cpuset_t *
cpuset_create(void);
void
cpuset_destroy(cpuset_t *set);
void
cpuset_zero(cpuset_t *set);
int
cpuset_set(cpuid_t cpu, cpuset_t *set);
int
cpuset_clr(cpuid_t cpu, cpuset_t *set);
int
cpuset_isset(cpuid_t cpu, const cpuset_t *set);
size_t
cpuset_size(const cpuset_t *set);
DESCRIPTION
This section describes the functions used to create, set, use and destroy the dynamic CPU sets.
This API can be used with the POSIX threads, see pthread(3) and affinity(3).
The ID of the primary CPU in the system is 0.
FUNCTIONS
cpuset_create()
Allocates and initializes a clean CPU-set. Returns the pointer to the CPU-set, or NULL on failure.
cpuset_destroy(set)
Destroy the CPU-set specified by set.
cpuset_zero(set)
Makes the CPU-set specified by set clean, that is, memory is initialized to zero bytes, and none of the CPUs set.
cpuset_set(cpu, set)
Sets the CPU specified by cpu in set. Returns zero on success, and -1 if cpu is invalid.
cpuset_clr(cpu, set)
Clears the CPU specified by cpu in the CPU-set set. Returns zero on success, and -1 if cpu is invalid.
cpuset_isset(cpu, set)
Checks if CPU specified by cpu is set in the CPU-set set. Returns the positive number if set, zero if not set, and -1 if cpu is
invalid.
cpuset_size(set)
Returns the size in bytes of CPU-set specified by set.
SEE ALSO
affinity(3), pset(3), sched(3), schedctl(8), kcpuset(9)
HISTORY
The dynamic CPU sets appeared in NetBSD 5.0.
BSD
November 2, 2011 BSD