05-04-2015
KGB ,thanks for the info!
yes, I have tried to use hardware DVDs as well as ISOs ( the ones uploaded to HMC)..
the hardware dvd's fail on the install of vios at disk #2..that's the point I mentioned about having to burn 3 different dvds, all of the same VIOS #2 ISO, just to make sure it was not bad physical media..it's not bad physical media.
here's how lost I am..forget the ASMI , on any server,you should be able to just drop the OS dvd in the dvdrom,and boot off of it.I can't even get to an OS terminal session from a serial connection via laptop. all I see is a serial-based version of ASMI..no 'exit to OS console' type of setting..
nothing else..I can't even install aix 7 on the box as a standalone, single server, if I wanted to.
interestingly,about the disks, when I have an LPAR running , I can go through smit and
assign more disks to that particular LPAR if I want..there are 6x146GB disks on the 8202. I use one for rootvg and had set up another pair for datavg.so roughly 300GB of free space to play with from these two disks ( sybase install, etc).
but that would've left 3 HD's for use by any other LPAR, of which none is found.
we got the server and it's enclosures from a 3rd party IBM vendor, but it came without any docs, and without any list of what was preloaded and how..nothing.
I know with Oracle t4-1, you go to the server console with start /SP/console and you're at the OS. I take it that the service or system processor on this IBM is the same concept, small proc you connect to for performing system functions,shutdown/startup,etc..but I can't even get to the console here. I can't even see the prompt for 'boot to SMS' on the ASMI.
it's just plain weird.
We're at the point where we will have a consultant come in and set this thing up. besides my lack of knowledge on the subject, I'm beginning to think something is critically wrong here..disconnecting all enclosures and putting AIX 6.1 OS CD/DVD #1 in the cdrom/dvdrom drive should at least let me boot off of it.but I cant even get there..
10 More Discussions You Might Find Interesting
1. AIX
can i get a step b syep explanation in creating LPAR... i have searched for tutorials i couldn't find the right one.... (2 Replies)
Discussion started by: udtyuvaraj
2 Replies
2. AIX
Hi all,
I have the following configuration
2 ds3524 storage disk systems located over 2 locations
2 P720 server located over 2 locations
DS3524 are connected to san switch.
Each vio server has 1 fc adapter attached to a san switch.
per p720 server 2 virtual io servers. Vio 1 has 1 lun... (2 Replies)
Discussion started by: markiemark
2 Replies
3. AIX
hi guys,
i need to develop following setup for a customer:
high availability oracle database on aix7 and linux in 2 different LPAR using dual ps700 blande a ds3400 and HMC.
the question is, it is possible to have automatic vioc failover(aix,linux) when for example 1 vios goes down?
in... (6 Replies)
Discussion started by: gullio23
6 Replies
4. Solaris
Hi,
I am creating "LSOF" solaris package from solaris "source" files. I have compiled the source file and with that i created prototype file also. Then using pkgmk command i can make the package .
In the package i am having (pkginfo pkgmap reloc) two file and one directory respectively
But... (3 Replies)
Discussion started by: Kathirvel G
3 Replies
5. AIX
Hi all please give me a link for IBM PowerVM (4 Replies)
Discussion started by: babinlonston
4 Replies
6. Windows & DOS: Issues & Discussions
Hello everyone,
I've been attempting to make a program which creates user accounts from a file which contains the usernames required. It also checks if the directory of the username exists in the C:\Users directory and then is going to give the option to delete the directory, or rename it, this... (1 Reply)
Discussion started by: charlieabee
1 Replies
7. AIX
Some simple questions about Intellistation 285 and powervm.
I want to learn AIX,so i will buy an used I285 from ebay.
1)Will support aix 7.1?
2)Is powervm avaliable?Where to download or buy it?
Thanks (3 Replies)
Discussion started by: Linusolaradm1
3 Replies
8. AIX
There can be configurations in IBM Server wherein a
standalone partition is created on some supported IBM Server
Or
A VIOS - VIOC LPARs created.
Now in both cases they are lpars. But if I want to differentiate b/w a standalone LPAR vs an VIOC LPAR how can I do..?
On a... (2 Replies)
Discussion started by: Manish00712
2 Replies
9. AIX
Hello,
POWER7 machine.
4 x 1Gbit port ethernet adapter is dedicated to vios. 8023ad etherchannel is created using those 4 ports. Etherchannel adapter is shared to lpars using SEA.
If I test network performance directly from vios partition (using iperf) I'm geting nice 4Gbit throughput. But if... (3 Replies)
Discussion started by: vilius
3 Replies
10. AIX
Hello,
After installing on P6 which is POWERVM IVM VIOS enabled (VET CODE D21C77ACD9229817CA1F00002C10004164 )
i get this message
"I/O hosting requires a hosting partition - boot not permitted".
HMC was connected to the machine
then HMC was removed through ASMI
Searching on... (2 Replies)
Discussion started by: filosophizer
2 Replies
IOSTAT(1) General Commands Manual IOSTAT(1)
NAME
iostat - report I/O statistics
SYNOPSIS
iostat [ drives ] [ interval [ count ] ]
DESCRIPTION
Iostat iteratively reports the number of characters read and written to terminals per second, and, for each disk, the number of transfers
per second, kilobytes transferred per second, and the milliseconds per average seek. It also gives the percentage of time the system has
spent in user mode, in user mode running low priority (niced) processes, in system mode, and idling.
To compute this information, for each disk, seeks and data transfer completions and number of words transferred are counted; for terminals
collectively, the number of input and output characters are counted. Also, each sixtieth of a second, the state of each disk is examined
and a tally is made if the disk is active. From these numbers and given the transfer rates of the devices it is possible to determine
average seek times for each device.
The optional interval argument causes iostat to report once each interval seconds. The first report is for all time since a reboot and
each subsequent report is for the last interval only.
The optional count argument restricts the number of reports.
If more than 4 disk drives are configured in the system, iostat displays only the first 4 drives, with priority given to Massbus disk
drives (i.e. if both Unibus and Massbus drives are present and the total number of drives exceeds 4, then some number of Unibus drives will
not be displayed in favor of the Massbus drives). To force iostat to display specific drives, their names may be supplied on the command
line.
FILES
/dev/kmem
/vmunix
SEE ALSO
vmstat(1)
4th Berkeley Distribution April 29, 1985 IOSTAT(1)