05-04-2015
KGB ,thanks for the info!
yes, I have tried to use hardware DVDs as well as ISOs ( the ones uploaded to HMC)..
the hardware dvd's fail on the install of vios at disk #2..that's the point I mentioned about having to burn 3 different dvds, all of the same VIOS #2 ISO, just to make sure it was not bad physical media..it's not bad physical media.
here's how lost I am..forget the ASMI , on any server,you should be able to just drop the OS dvd in the dvdrom,and boot off of it.I can't even get to an OS terminal session from a serial connection via laptop. all I see is a serial-based version of ASMI..no 'exit to OS console' type of setting..
nothing else..I can't even install aix 7 on the box as a standalone, single server, if I wanted to.
interestingly,about the disks, when I have an LPAR running , I can go through smit and
assign more disks to that particular LPAR if I want..there are 6x146GB disks on the 8202. I use one for rootvg and had set up another pair for datavg.so roughly 300GB of free space to play with from these two disks ( sybase install, etc).
but that would've left 3 HD's for use by any other LPAR, of which none is found.
we got the server and it's enclosures from a 3rd party IBM vendor, but it came without any docs, and without any list of what was preloaded and how..nothing.
I know with Oracle t4-1, you go to the server console with start /SP/console and you're at the OS. I take it that the service or system processor on this IBM is the same concept, small proc you connect to for performing system functions,shutdown/startup,etc..but I can't even get to the console here. I can't even see the prompt for 'boot to SMS' on the ASMI.
it's just plain weird.
We're at the point where we will have a consultant come in and set this thing up. besides my lack of knowledge on the subject, I'm beginning to think something is critically wrong here..disconnecting all enclosures and putting AIX 6.1 OS CD/DVD #1 in the cdrom/dvdrom drive should at least let me boot off of it.but I cant even get there..
10 More Discussions You Might Find Interesting
1. AIX
can i get a step b syep explanation in creating LPAR... i have searched for tutorials i couldn't find the right one.... (2 Replies)
Discussion started by: udtyuvaraj
2 Replies
2. AIX
Hi all,
I have the following configuration
2 ds3524 storage disk systems located over 2 locations
2 P720 server located over 2 locations
DS3524 are connected to san switch.
Each vio server has 1 fc adapter attached to a san switch.
per p720 server 2 virtual io servers. Vio 1 has 1 lun... (2 Replies)
Discussion started by: markiemark
2 Replies
3. AIX
hi guys,
i need to develop following setup for a customer:
high availability oracle database on aix7 and linux in 2 different LPAR using dual ps700 blande a ds3400 and HMC.
the question is, it is possible to have automatic vioc failover(aix,linux) when for example 1 vios goes down?
in... (6 Replies)
Discussion started by: gullio23
6 Replies
4. Solaris
Hi,
I am creating "LSOF" solaris package from solaris "source" files. I have compiled the source file and with that i created prototype file also. Then using pkgmk command i can make the package .
In the package i am having (pkginfo pkgmap reloc) two file and one directory respectively
But... (3 Replies)
Discussion started by: Kathirvel G
3 Replies
5. AIX
Hi all please give me a link for IBM PowerVM (4 Replies)
Discussion started by: babinlonston
4 Replies
6. Windows & DOS: Issues & Discussions
Hello everyone,
I've been attempting to make a program which creates user accounts from a file which contains the usernames required. It also checks if the directory of the username exists in the C:\Users directory and then is going to give the option to delete the directory, or rename it, this... (1 Reply)
Discussion started by: charlieabee
1 Replies
7. AIX
Some simple questions about Intellistation 285 and powervm.
I want to learn AIX,so i will buy an used I285 from ebay.
1)Will support aix 7.1?
2)Is powervm avaliable?Where to download or buy it?
Thanks (3 Replies)
Discussion started by: Linusolaradm1
3 Replies
8. AIX
There can be configurations in IBM Server wherein a
standalone partition is created on some supported IBM Server
Or
A VIOS - VIOC LPARs created.
Now in both cases they are lpars. But if I want to differentiate b/w a standalone LPAR vs an VIOC LPAR how can I do..?
On a... (2 Replies)
Discussion started by: Manish00712
2 Replies
9. AIX
Hello,
POWER7 machine.
4 x 1Gbit port ethernet adapter is dedicated to vios. 8023ad etherchannel is created using those 4 ports. Etherchannel adapter is shared to lpars using SEA.
If I test network performance directly from vios partition (using iperf) I'm geting nice 4Gbit throughput. But if... (3 Replies)
Discussion started by: vilius
3 Replies
10. AIX
Hello,
After installing on P6 which is POWERVM IVM VIOS enabled (VET CODE D21C77ACD9229817CA1F00002C10004164 )
i get this message
"I/O hosting requires a hosting partition - boot not permitted".
HMC was connected to the machine
then HMC was removed through ASMI
Searching on... (2 Replies)
Discussion started by: filosophizer
2 Replies
LEARN ABOUT BSD
install-solaris
install-solaris(1M) install-solaris(1M)
NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)