Solaris 11.2 on Supermicro X10SL7-F with LSI SAS 2308 Post: 302941059

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

SAS Tuning

Does anyone had perfomed a tuning with SAS on Solaris??? Performance is not so good and I found out that Share Memory an Semaphores are the same that initial instalation, I havent found info at internet Please help

2. Solaris

SAS Setup

Hi, I have a solaris box with an LSI SAS HBA and a16 bay SAS JBOD. I can only see 15 of the 16 drives, ID 7 is not seen. Do I have to edit the st.conf file to get things to work properly? Thanks

3. Solaris

Install Solaris 10 with an internal StorageTek SAS HBA Raid card

Hi all i would like to ask some suggests about my next job! I have to install a new Sun Netra T5220, with an additional internal StorageTek SAS HBA Raid. The problem come in if every disk is now controlled by the HBA, how can I install the OS? No disk is being detected by the OS. SAS card...

4. Solaris

installing solaris with StorageTek SAS RAID Internal HBA

i was given a task which needs to perform a raid 1 on the boot disk, and 4 other disks on raid 10. Is there any other alternative in installing solaris 10 other than through network installation?will be using solaris update 6. while reading through the user guide i got pretty confuse. ...

5. Linux

Supermicro(dual core) server getting rebooted after "decompressing the kernel;booting the kernel" me

supermicro(dual core) server getting rebooted after "decompressing the kernel;booting the kernel" message comes. I tried giving acpi=off to the kernel command line but same problem.It shows everything ok and no problem with memory and processors and power supplies.Wt could be the reason? It has...

6. SCO

Boot hang after relocate of LSI HBA controller

Hi folks, I had problems trying to install SCO OpenServer 6 on a PC with no floppy drive and a SATA CD drive. Eventually after advice received on this forum last week, I adopted a different approach by fitting the LSI HBA RAID adapter and associated disks into an older PC that does have CD and...

7. Solaris

SAS drive USB caddy on Solaris V440

Got a T2000 which has got the 2.5" SAS drives. Want to be able, if I can, to connect to USB caddy and connect to a V440. Anyone ever tried this? To be honest, having problems even finding a SAS-USB caddy.

8. Linux

My first SAS..a simple question.

I bought for backup this controller LSI LSI9212-4i4e 6G SAS I will buy a quantum reader like this Quantum TC-L62BN-EM 2500GB LTO Two simple question a)I read..2500GB,this mean i cannot use tape lto6 over 3tb? b)Wich external cable?A sata external cable is good? Thanks

LEARN ABOUT NETBSD

jmide

JMIDE(4)						   BSD Kernel Interfaces Manual 						  JMIDE(4)

NAME

     jmide -- JMicron Technology JMB36x PCIe to SATA II/PATA controller driver

SYNOPSIS

     jmide* at pci? dev ? function ? flags 0x0000
     ahcisata* at jmide?

DESCRIPTION

     The jmide driver supports the JMicron Technology JMB36x IDE controllers.

     These PCI-e controllers exist in different flavors (1 or 2 PATA Ultra/133 ports and/or 1 or 2 SATA-II ports), and are highly flexible.  The
     SATA ports can be attached to the integrated AHCI controller or attached to the PCI IDE channels in PATA emulation, in either single-drive
     emulation on each PCI IDE channels, or in master/slave emulation on one of the PCI IDE channels.

     When enabled, the AHCI controller can either be on the PCI function 0 or function 2.  The PCI IDE controller can also be on either PCI func-
     tion, and can share the PCI function with AHCI.  The jmide driver supports both the AHCI controller and PCI IDE controller in various config-
     urations.

SEE ALSO

     ahcisata(4), ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)

AUTHORS

     The jmide driver was written by Manuel Bouyer.

BSD
								   July 2, 2007 							       BSD