04-11-2015
Do you know the PCI id of the LSI 2308? If it's 1000:006e, I don't see it in /etc/driver_aliases on my Solaris 11.2 box.
Even if it's not there, I'd think there's a good chance it'll work if you manually add it to driver_aliases or run add_drv. Just about every LSI HBA just uses the "mpt" driver anyway - FC, SAS, SCSI. And they can all be manipulated with the "lsiutil" utility.
This User Gave Thanks to achenle For This Post:
8 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Does anyone had perfomed a tuning with SAS on Solaris???
Performance is not so good and I found out that Share Memory an Semaphores are the same that initial instalation, I havent found info at internet
Please help (1 Reply)
Discussion started by: alex blanco
1 Replies
2. Solaris
Hi, I have a solaris box with an LSI SAS HBA and a16 bay SAS JBOD. I can only see 15 of the 16 drives, ID 7 is not seen. Do I have to edit the st.conf file to get things to work properly?
Thanks (0 Replies)
Discussion started by: montanye
0 Replies
3. Solaris
Hi all
i would like to ask some suggests about my next job!
I have to install a new Sun Netra T5220, with an additional internal StorageTek SAS HBA Raid.
The problem come in if every disk is now controlled by the HBA, how can I install the OS?
No disk is being detected by the OS.
SAS card... (2 Replies)
Discussion started by: kakabobo
2 Replies
4. Solaris
i was given a task which needs to perform a raid 1 on the boot disk, and 4 other disks on raid 10.
Is there any other alternative in installing solaris 10 other than through network installation?will be using solaris update 6.
while reading through the user guide i got pretty confuse.
... (1 Reply)
Discussion started by: monstar1407
1 Replies
5. Linux
supermicro(dual core) server getting rebooted after "decompressing the kernel;booting the kernel" message comes.
I tried giving acpi=off to the kernel command line but same problem.It shows everything ok and no problem with memory and processors and power supplies.Wt could be the reason?
It has... (1 Reply)
Discussion started by: pankajd
1 Replies
6. SCO
Hi folks,
I had problems trying to install SCO OpenServer 6 on a PC with no floppy drive and a SATA CD drive.
Eventually after advice received on this forum last week, I adopted a different approach by fitting the LSI HBA RAID adapter and associated disks into an older PC that does have CD and... (4 Replies)
Discussion started by: millosman
4 Replies
7. Solaris
Got a T2000 which has got the 2.5" SAS drives. Want to be able, if I can, to connect to USB caddy and connect to a V440.
Anyone ever tried this? To be honest, having problems even finding a SAS-USB caddy. (0 Replies)
Discussion started by: psychocandy
0 Replies
8. Linux
I bought for backup this controller
LSI LSI9212-4i4e 6G SAS
I will buy a quantum reader like this
Quantum TC-L62BN-EM 2500GB LTO
Two simple question
a)I read..2500GB,this mean i cannot use tape lto6 over 3tb?
b)Wich external cable?A sata external cable is good?
Thanks (0 Replies)
Discussion started by: Linusolaradm1
0 Replies
MFI(4) BSD Kernel Interfaces Manual MFI(4)
NAME
mfi -- LSI Logic & Dell MegaRAID SAS RAID controller
SYNOPSIS
mfi* at pci? dev ? function ?
DESCRIPTION
The mfi driver provides support for the MegaRAID SAS family of RAID controllers, including:
- Dell PERC 5/e, PERC 5/i, PERC 6/e, PERC 6/i
- Intel RAID Controller SRCSAS18E, SRCSAS144E
- LSI Logic MegaRAID SAS 8208ELP, MegaRAID SAS 8208XLP, MegaRAID SAS 8300XLP, MegaRAID SAS 8308ELP, MegaRAID SAS 8344ELP, MegaRAID
SAS 8408E, MegaRAID SAS 8480E, MegaRAID SAS 8708ELP, MegaRAID SAS 8888ELP, MegaRAID SAS 8880EM2, MegaRAID SAS 9260-8i
- IBM ServeRAID M1015, ServeRAID M5014
These controllers support RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50 and RAID 60 using either SAS or SATA II drives.
Although the controllers are actual RAID controllers, the driver makes them look just like SCSI controllers. All RAID configuration is done
through the controllers' BIOSes.
mfi supports monitoring of the logical disks in the controller through the bioctl(8) and envstat(8) commands.
EVENTS
The mfi driver is able to send events to powerd(8) if a logical drive in the controller is not online. The state-changed event will be sent
to the /etc/powerd/scripts/sensor_drive script when such condition happens.
SEE ALSO
intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8)
HISTORY
The mfi driver first appeared in NetBSD 4.0.
BSD
March 22, 2012 BSD