dladm show-phys
ldm list -o network primary
ldm list -o network adml3
so two 10GBE physical NIC's (Xgb0 and Xgb2), one DHCP, one not. two virtual switches, one for each NIC, then two vnet's in the LDOM one for each virtual switch.
no routing, no IPF, in fact the route service is turned off.
if I really wanted to get fancy I would do an aggregate and assign it to the vsw for failover. also I have vlans set. Sometimes it just nice to see a working config to compare to. Let the questions begin....
Hi,
I have my application and database servers running on solaris. I need to check Db connectivity for a datasource in my Db server.
Please guide me how to do it in solaris env.
Aru (2 Replies)
hi expert,
i had reinstall the sun v890 server solaris 8 and also do mirroring, i had configure the network for the server (hostname.eri0,hosts,netmasks,nodename,etc) after i reboot get and error messages below :
Setting default IPv4 interface for multicast: add net 224.0/4: gateway... (5 Replies)
I have two Dell x86 machines on which I am attempting to install Solaris 10 from CD. I am not doing a Jumpstart install. This is my first experience in installing Solaris (or any other OS). I am following the instructions at How to Quickly Install the Solaris 10 1/06 OS
The first machine... (3 Replies)
Hi-
I would like to know if anyone has used any USB External Hard Drive, about 500/750GB or 1TB, with any of the Solaris 10 "SPARC" systems. Not on intel nor amd platform.
I'm looking for the compatible drive and found a few listed on Sun solaris ready page, but I'd like to have inputs from... (3 Replies)
Hi All,
I am new here - this is my first post.
I have installed Solaris 10 5/09 on my Dell M6300. The install went well, but the Dell's onboard network card is the Broadcom BCM5756ME Gigabit Ethernet - and sadly no Solaris driver exists for it. The Solaris 10 install just jumped by the... (1 Reply)
My Sparc servers disappeared in my last move. I found my Sparc software in the basement yesterday, Solaris 9 9/04 Operating Environment, Java Enterprise System, Accessory Software, and License are all sealed, box is opened. Also have Solaris 10 but in opened sleeves with Sun Office for Sparc. ... (2 Replies)
Hello,
I have a requirement to check the tcp network connectivity between server it's running on and the list of host's and ports combination.
i have written the below code but it doesn't work, but when i execute the nc command outside the script it works fine.
please help me where i am... (8 Replies)
Hi Gurus,
We are migrating Oracle from Solaris to RHEL 7 and looking for Solaris equivalent commands for Linux.
we are using lot of korn shell scripts built on Solaris so, i am looking for equivalent commands which are using in Solaris..
Could you please help me here by proving any info... (1 Reply)
Hi Gurus,
We are migrating Oracle from Solaris to RHEL 7 and looking for Solaris equivalent commands for Linux.
we are using lot of korn shell scripts built on Solaris so, i am looking for equivalent commands which are using in Solaris..
Could you please help me here by proving any info ... (4 Replies)
Discussion started by: mssprince
4 Replies
LEARN ABOUT NETBSD
mc
MC(4) BSD Kernel Interfaces Manual MC(4)NAME
mc -- Ethernet driver for Am79C940 (MACE) onboard Ethernet
SYNOPSIS
mc* at obio?
DESCRIPTION
The mc interface provides access to a 10 Mb/s Ethernet network via the AMD Am79C940 (MACE) Ethernet chip set.
HARDWARE
The mc interface supports the on-board Ethernet of the following mac68k machines:
- Centris 660AV
- Quadra 660AV
- Quadra 840AV
The mc interface supports the on-board Ethernet of the following macppc machines:
- Apple Network Server (500 and 700)
- Apple Power Macintosh (7300, 7500, 7600, 8500, 8600, 9500, and 9600)
- Power Computing (PowerCenter, PowerCenter Pro, PowerCurve, PowerTower, PowerTower Pro, and PowerWave)
DIAGNOSTICS
mc0 at obio0: address %s. This is a normal autoconfiguration message noting the 6 byte physical Ethernet address of the adapter.
SEE ALSO
mac68k/ae(4), mac68k/bm(4), gem(4), sn(4), tlp(4), ifconfig(8)HISTORY
The mc interface first appeared in NetBSD 1.3.
AUTHORS
The mc Ethernet driver was written by Dave Huang <khym@bga.com>. The man page was written by Thomas Klausner <wiz@NetBSD.org> and Michael
Wolfson <mbw@NetBSD.org>.
BSD December 13, 1997 BSD