We should have a hall of fame for comments like that!
;0)
Well, you can try, but you'll probably have pieces-parts all over...
And it's not just the cache that's the problem with a mounted file system - it's the fact that things are changing. Every file system check I'm aware of assumes the entire file system is static. And it pretty much has to be to ensure consistency. If there's some sort of required consistency between two or more items in the file system, if things are changing there's no way to know if there's an inconsistency because it's corrupt or because it's been changed. The fsck process can't look at the entire file system at one moment in time - it can only look at all the different parts of the file system in some sequence.
Once in a while, I would think it advisable to run fsck -y to check the disk.
Should I sign in as su or sudo?
What is the difference and which is preferred?
Thank you in Advance! (4 Replies)
OS: Solaris 5.8
Everytime I run fsck -y I get: FILE SYSTEM STATE IN SUPERBLOCK IS WRONG; FIX? yes
Do I need to run fsck with the backup superblock option or is there
some other option I should use. I have tried the format->analyze->read
option but that does not report any corrupt blocks.... (5 Replies)
I have a Solaris 7 box. We got a strange error in the syslog, which read as follows:
Nov 15 11:50:16 server-01 unix: NOTICE: free inode /mount1/8025691 had size 0x20d
I consulted with a fellow sysadmin, and he suggested running "fsck -N" on the filesystem in question without unmounting it. So I... (1 Reply)
I want to use fsck to check and repair my linux system. When I use this command, what do I need to pay attention to or what should I do to make job running successfully. Thanks for your inputs for a newbie. (3 Replies)
Hello
I am getting this in dmesg:
/mount1: unexpected free inode 1262865, run fsck(1M) -o f
What are the options I should use with fsck?
thanks (2 Replies)
i want to know what does it mean by doing a consistentcy check fsck on a disk and why journaling filesystems dont need to do it
and what is meant by disk is in a consistent state when writing because entries are recorded in a journal and then to the metadata and then removed from journal (1 Reply)
Hello
I own a SPARC Ultra 10 workstation (standalone) and when issuing the fsck command I get the following output on fs C0t0d0s7:
Phase 1 (checks blocks and sizes):
dada warning: /pci@lf;0/pci@1, 1/ide@3/dad@0,0(dad1): ATA Transport failed:reason, `incomplete'>
Uncorrectable data... (2 Replies)
I am not able to boot into solaris. I am getting following message.
The / file system (/dev/rdsk/c0t0d0s0) is being checked.
Warning - Unable to repair the / filesystem. Run fsck manually(fsck -F ufs /dev/rdsk/c0t0d0s0).
I ran fsck manually but it didn't work.
Help from anyone would be... (1 Reply)
What can I fix this issue? I have ran below commands but everything is same.:confused:
WARNING: Last shutdown is later than time on time-of-day chip: check date.
The / file system (/dev/rdsk/c1t0d0s0) is being checked
WARNING - unable to repair the / filesystem. Run fsck manually (fsck -F... (4 Replies)
Hi,
When we are running fsck in vxvm FS within few sec it will completed even if data is more than 500GB or in TB also.
compare to UFS FS in that it will take more time compare with vxvm.UFS check FS in block level. & then vvxm on where its checking the FS.
Please explain. (1 Reply)
Discussion started by: tiger09
1 Replies
LEARN ABOUT HPUX
umountall
mountall(1M)mountall(1M)NAME
mountall, umountall - mount and unmount multiple file systems
SYNOPSIS
FStype] [file_system_table |
FStype]
DESCRIPTION
is used to mount file systems according to file_system_table. By default, is the file_system_table. If a dash is specified, reads
file_system_table from the standard input; the standard input must be in the same format as the
Before each file system is mounted, a check is done using (see fsck(1M)) to ensure that the file system is mountable. If the file system
is not mountable, it is repaired by before the mount is attempted.
causes all mounted file systems except the non-removable file systems such as to be unmounted.
Options
and recognize the following options:
Specify the file system type
(FStype) to be mounted or unmounted.
Specify action on local file systems only.
Specify action on remote file systems only.
Send a signal to processes that have files opened.
Attempt to mount all the unmounted file systems. This option will not perform the file system consistency check and repair.
Perform the file system consistency check and repair on all unmounted file system. This option will not mount the file systems.
DIAGNOSTICS
Error and warning messages may originate from or See fsck(1M), mount(1M), or fuser(1M) to interpret the error and warning messages.
EXAMPLES
Mount all unmounted file systems listed in
Mount all local file systems listed in
Mount all remote file systems listed in
Mount all local hfs file systems:
Unmount all NFS file systems and kill any processes that have files opened in the file system:
WARNINGS
especially with the option, should be used with extreme caution, because it can cause severe damage.
The option may not be available in future releases.
may not be effective with some cases of LOFS file systems.
FILES
Static information about the file systems
Mounted file system table
SEE ALSO fsck(1M), mount(1M), fuser(1M), mnttab(4), fstab(4), signal(2)mountall(1M)