I realise that I'm coming to this thread very late so what I write may not be relevant.
On a straightforward Solaris configuration the default router is defined in
This file contains only the ip address of the default router on the first line of the file, left justified, so very easy to create manually and reboot. For example:
Then, faced with any request that it doesn't know where to send, the system will send it there.
I am running Mandrake 8.0 (KDE ver 2.1.1) on a machine with 2 NICs. This is a college project. I am attempting to configure this machine as a firewall, and to pass packets from one network to another. Eth0 is on my external network. Eth1 is on my internal network. I set the gateway in "netconf"... (1 Reply)
I have a Windows laptop and a Sparc desktop. I'm trying to toy around with routing.
If have always on broadband from BT. My router ipaddress is:
192.168.1.1
This router uses DHCP.
My Laptop Ip is as follows:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :... (2 Replies)
hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no... (1 Reply)
Hi all
I hate networking, I hate everything to do with it. Its something I do in anger in one contract, then forget. This is more of a question / than a problem.
So, on a solaris 10 server, using older qfe cards, Ive got a sun truck with 4 nics (qfe0,3,4,7), and a ipmp pair (hemo0,qfe1).... (2 Replies)
Hi,
I would like to ask some networking solution regarding my work LAN and 3G usb network problem. I want to route my internet traffic to the 3G network and sometimes connect to some of my work network for ssh to configure some workstation or print something. Currently my problem is i can't... (0 Replies)
hi, I've wrote my own network routing algorithm in java, now i wanna test it and see if it works correctly, also i wanna test it's performance in comparison with other network routing algorithms like RIP. can anyone tell me how can i do this? is there any simulator or something for network routing... (0 Replies)
I've one Netra 240
After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces.
I tried to restart and plumb/unplumb with no luck.
ifconfig -a... (7 Replies)
Hello,
I'm attempting to setup a test network with a client-server based architecture using a proprietary application. The client works by communicating with the server on separate links (typically cellular connections) and then initiates a tunnel over each active link. However, in place of the... (0 Replies)
Hi,
I have 2 machines in production environment:
1. redhat machine for application
2. DB machine (oracle)
The application doing a lot of small read&writes from and to the DB machine.
The problem is that after some few hours the network from the application to the DB becomes very slow and... (4 Replies)
Discussion started by: moshesa
4 Replies
LEARN ABOUT OPENSOLARIS
defaultrouter
defaultrouter(4) File Formats defaultrouter(4)NAME
defaultrouter - configuration file for default router(s)
SYNOPSIS
/etc/defaultrouter
DESCRIPTION
The /etc/defaultrouter file specifies a IPv4 host's default router(s).
The format of the file is as follows:
IP_address
...
The /etc/defaultrouter file can contain the IP addresses or hostnames of one or more default routers, with each entry on its own line. If
you use hostnames, each hostname must also be listed in the local /etc/hosts file, because no name services are running at the time that
defaultrouter is read.
Lines beginning with the ``#'' character are treated as comments.
The default routes listed in this file replace those added by the kernel during diskless booting. An empty /etc/defaultrouter file will
cause the default route added by the kernel to be deleted.
Use of a default route, whether received from a DHCP server or from /etc/defaultrouter, prevents a machine from acting as an IPv4 router.
You can use routeadm(1M) to override this behavior.
FILES
/etc/defaultrouter Configuration file containing the hostnames or IP addresses of one or more default routers.
SEE ALSO in.rdisc(1M), in.routed(1M), routeadm(1M), hosts(4)SunOS 5.11 17 Aug 2004 defaultrouter(4)