10-16-2014
Wow, I'm a bit stumped now. I've found what looks like a hardware manual, but it's HUGE!
I'm not sure it makes great bedtime reading, but it might help - if you have a good chunk of time to find the appropriate section.
Maybe this location in the whole document will help:-
Family 9117+03 IBM Power 770 Server MMB
Sorry it's not very specific
Robin
This User Gave Thanks to rbatte1 For This Post:
10 More Discussions You Might Find Interesting
1. Solaris
Hello
We have a power supply in an x4100 (x86) and it seems to be faulty but it is still working!?! (this box only has one PSU). We are getting Orange flashing warning light on the front of the box and the LED labelled “rear PSu” is solid orange ...We don't seem to have had any syslog error... (8 Replies)
Discussion started by: hcclnoodles
8 Replies
2. Solaris
Hi All,
I replace a sub-mirror of a mirrored volume by using below command:
#metadetach d10(mirror) d11(striped)
#metattach d10 d13(other striped)
With above process I successfully replaced a faulty volume. I want to knoow if the process I followed is right. Or if not, what... (5 Replies)
Discussion started by: naw_deepak
5 Replies
3. Solaris
Hi everyone,
I wanted to ask a question about fmadm and explorer outputs.
Recently found out that an error shows up in fmadm saying "mb is faulty but still in service" so we took an explorer send to Oracle Support. Error led wasn't on but we didn't want to risk the probability.
They came up... (1 Reply)
Discussion started by: royalliege
1 Replies
4. Solaris
Hi,
Recently i came across a disk that seems to be faulty and need help. I have gathered some information by running below commands and any help on how to solve this will be great.
# uname –a
SunOS XYZ 5.7 Generic_106541-16 sun4u sparc SUNW,Ultra-4
#df -k
Filesystem kbytes used... (3 Replies)
Discussion started by: phanidhar6039
3 Replies
5. HP-UX
Requirement to remove a faulty mirrored disk from hp-ux LVM
<root@pdwp1s>/etc # vgdisplay -v /dev/vg00
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c2t0d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't... (9 Replies)
Discussion started by: Shirishlnx
9 Replies
6. HP-UX
Hi,
Have mirrored the primary disk to 3 .
Server and OS:
# uname -a
HP-UX pdwp1s B.11.11 U 9000/800 118434630 unlimited-user license
# model
9000/800/L3000-7x
# strings /etc/lvmtab
/dev/vg00
+F@<
/dev/dsk/c1t2d0
/dev/dsk/c2t2d0
/dev/dsk/c2t0d0
But now I have only 1 disk... (5 Replies)
Discussion started by: Shirishlnx
5 Replies
7. HP-UX
Hello,
I'm new to this forum and as you will see from my question I'm new to UNIX as well.
One of our costumers has HP rx4640 running on UNIX with two 300GB hot-swappable disks that are mirrored. They reported to us that one of the disks is faulty and they want us to take care of it. Below is... (16 Replies)
Discussion started by: gjk
16 Replies
8. Shell Programming and Scripting
I have number in file which contains date and serial number:
2013101000.
The last two digits are serial number (00). So maximum of serial number is 100.
After reaching 100 it becomes 00 with incrementing 10 which is day with max 31.
after reaching 31 it becomes 00 and increments 10... (31 Replies)
Discussion started by: Natalie
31 Replies
9. Red Hat
Hi,
How to determine if HBA card in getting faulty from linux host ? any pointers. (2 Replies)
Discussion started by: saurabh84g
2 Replies
10. UNIX for Beginners Questions & Answers
I plugged both power cables in both power supply. When I unplugged each power cable one by one, the SPARC T4-1 machine keep running. However, show faulty command shows below message. (I have also attached the picture of both power supply)
-> show faulty
Target ... (1 Reply)
Discussion started by: z_haseeb
1 Replies
LEARN ABOUT CENTOS
efikeygen
EFIKEYGEN(1) General Commands Manual EFIKEYGEN(1)
NAME
efikeygen - command line tool for generating keys to use for PE image signing
SYNOPSIS
efikeygen <[--ca | -C] [--self-sign | -S] | [--signer=nickname]>
[--token=token | -t token]
[--nickname=nickname | -n nickname]
[--common-name=common name | -c common name]
[--url=url | -u url]
[--serial=serial | -s serial]
DESCRIPTION
efikeygen is a command line tool for generating keys and certificates to be used with pesign. These are standard X.509 certificates, and
can potentially be generated with any certificate creation tool. efikeygen simply sets generates keys with sensible options set for a key
to be used for PE image signing.
OPTIONS
--ca The certificate being generated is for a CA.
--self-sign
The generated certificate is to be self signed.
--signer=nickname
Nickname of certificate to be used to sign the generated certificate.
--token=token
Use the specified NSS token's certificate database.
--nickname=nickname
The nickname to use for the generated certificate.
--common-name=common-name
The X.509 Common Name for the generated certificate. This should be in rfc2253 syntax, i.e. "CN=John Doe,OU=editing,O=New York
Times,L=New York,ST=NY,C=US"
--url=url
Informational url regarding objects signed with this key.
--serial=serial number
Serial number for use with this key. A certificate is identified by its signer and its serial number, so it's best not to ever re-
use this value with the same signer.
SEE ALSO
pesign(1)
AUTHORS
Peter Jones
Mon Jan 07 2013 EFIKEYGEN(1)