Lose default gateway Post: 302916196

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Add route gateway -> Restart !! Lose it

:confused: Hi: I don�t know how to add route gateway and when restart the machine lose this route and put other. In SCO ver 5.6 Enterprise write: etc\route delete gateway route add gateway 199.199.1.1. so , netstat -rn to see if has change -> all ok Restart -> !!!...

2. Solaris

How can I change the default gateway?

my actual default gatewas IP is: default 192.168.11.254 and I need to change it to 192.168.11.2, I'm using Solaris 9, how can i do it? and how i can save it in case that the machine restart and have the new default gateway IP saved?

3. IP Networking

default gateway in unix?

i'm a real unix newbie, setting up a network, with a router to router vpn connection with a remote site, all the win stuff is talking and pinging and all the stuff it should be doing (yeah and crashing too, lol) but no communication with the unix box, i think the problem is with my default...

4. AIX

Help with Default Gateway

Hi, I have two interfaces on m AIX 5.3 box. One going to 192.168.1.x and it has a gateway of 192.168.1.1. I configured the other gateway with 192.168.2.x and the default gateway as 192.168.2.1. But I can't get connectivity to the 192.168.2.1 network. Can someone help me out and let me know...

5. Linux

GNUGK-How to setup static gateway to gateway routing

Dear Sir I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper. I am having a problem, configuring static call routing on GNUGK in the section ...

6. UNIX for Dummies Questions & Answers

Cannot ping default gateway

I have NCR MP-RAS unix. I have been trying for several months to get our network working since we had never used it before. I have setup all routes that I can think of. I know it has something to do with the routing table, because out of sheer luck I was able to get it working, and than like a...

7. Red Hat

can't update the default gateway

Hi, I have server that I change its network configuration from using DHCP to using static IP. I have edited the file /etc/sysconfig/network-scripts/ifcfg-eth0 To: BOOTPROTO=STATIC IPADDR=xxx.xxx.xxx.xxx NETMASK=255.255.255.0 GATEWAY=yyy.yyy.yyy.yyy I did /etc/init.d/network...

8. IP Networking

Default Gateway

I am am using IPv6 IP's with an OS of Debian. Is it possible to set a *static* default gateway w/o the router being connected? Will that gateway change when the router is connected? TIA

9. UNIX for Beginners Questions & Answers

Inconsistency between RedHat 6.5 global gateway and single gateway leads to loss of default gateway

Dear friends I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different....

LEARN ABOUT OPENSOLARIS

inet_type

inet_type(4)							   File Formats 						      inet_type(4)

NAME

       inet_type - default Internet protocol type

SYNOPSIS

       /etc/default/inet_type

DESCRIPTION

       The inet_type file defines the default IP protocol to use. Currently this file is only used by the ifconfig(1M) and netstat(1M) commands.

       The  inet_type  file  can  contain  a  number of <variable>=<value> lines. Currently, the only variable defined is DEFAULT_IP, which can be
       assigned a value of IP_VERSION4, IP_VERSION6, or BOTH.

       The output displayed by the ifconfig and netstat commands can be controlled by the value of DEFAULT_IP set in inet_type file.  By  default,
       both commands display the IPv4 and IPv6 information available on the system. The user can choose to suppress display of IPv6 information by
       setting the value of DEFAULT_IP.  The following shows the possible values for DEFAULT_IP and the resulting ifconfig and netstat output that
       will be displayed:

       IP_VERSION4    Displays	only IPv4 related information. The output displayed is backward compatible with older versions of the ifconfig(1M)
		      and netstat(1M) commands.

       IP_VERSION6    Displays both IPv4 and IPv6 related information for ifconfig and netstat.

       BOTH	      Displays both IPv4 and IPv6 related information for ifconfig and netstat.

       The command-line options to the ifconfig and netstat commands override the effect of DEFAULT_IP as set in the inet_type file. For  example,
       even if the value of DEFAULT_IP is IP_VERSION4, the command

	 example% ifconfig -a6

       will display all IPv6 interfaces.

EXAMPLES

       Example 1 Suppressing IPv6 Related Output

       This is what the inet_type file must contain if you want to suppress IPv6 related output:

	 DEFAULT_IP=IP_VERSION4

SEE ALSO

       ifconfig(1M), netstat(1M)

SunOS 5.11							    16 Jun 1999 						      inet_type(4)