trying to do this for a DR situation. I've cloned an iSCSI LUN to another server. I've created an LDOM on it. set the LDOM to auto-boot=false and exported the LUN as a raw disk to the new LDOM. After starting the LDOM and telnetting to it. I can get to the OK prompt and see the disk but when I try to boot into single user mode I get the following output.
how to do I make it executable?
Last edited by DukeNuke2; 08-05-2014 at 03:34 AM..
Hello all,
I'm trying to recover from backup file to a new system with a new disk. I'm able to partition my new hard drive the same way as my old drive, but I'm unable to boot off of it. I have set the fdisk to toogle as a boot flag. But it does not seem to be working. Does anyone know how to... (4 Replies)
The second disk that I'm trying to make bootable is to hold another version of Solaris (9).
I've created the partitions with format and labeled the disk - created the filesystems with newfs - created and mounted the directories.
...but I think I've missed something out like using fdisk to... (16 Replies)
In our HP/Unix system, our master scsi drive was bootable and our mirrored drive was non-bootable. Are any of these alternatives possible:
1) Make the non-bootable scsi drive bootable? How?
2) Create a bootable scsi drive, then copy the mirrored data to the newly created scsi drive?
I seek... (1 Reply)
Hi,
I have an iSCSI LUN of 200GB. I increased it to 250GB and when I try to increase the size of the vg, I'm getting an error that none of the volumes have increased in size.
How can I get the OS to see the additional 50GB?
---------- Post updated at 03:22 PM ---------- Previous update... (9 Replies)
Hi,
I need to set up iscsi LUN on Solaris 9. I've done it on Solaris 10 with iscsiadm. How do you do it on Solaris 9 though? Currently using Solaris 9 update 2. Your help is appreciated.
Thanks,
Sparcman (6 Replies)
We "lose" the iscsi device after a reboot - i.e., it appears in /dev/rdsk and /dev/dsk but format cannot find it. Obviously, it won't mount either. This happens for two separately defined luns.
We must be missing a step in iscsiadm.
The luns are defined as targets, we can see them in... (2 Replies)
Hi,
I have an iSCSI LUN attached to an AIX 5.3 box. It's initial size is 250GB, I just grew it on the SAN to 300GB, but AIX is not seeing the change. Right now I have some processes going and it's eating up the disk space. I need to grow this lun by atleast 30GB otherwise the process with bomb... (5 Replies)
Hello Everyone,
Can someone help me to mount a SAN hdisk which contains a clone data copy(san) of the remote server to the another machine. Both servers are running in AIX.
Thanks in advance !
Regards,
Gowtham.G (3 Replies)
Hi,
I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name.
Please share me the steps to complete this requirements.
Thanks in advance. (1 Reply)
Hi,
I am trying to setup multipathing (using DM multipath) for a redhat cluster setup ...all setup is done but issue is :
node 1 shows the shared iscsi lun as sdc
node 2 shows the same as sdg (changes on reboots)
Due to this (i guess) i get i/o error & i can not read files created by... (0 Replies)
Discussion started by: heman96
0 Replies
LEARN ABOUT HPUX
bootconf
bootconf(4) Kernel Interfaces Manual bootconf(4)NAME
bootconf - boot device configuration table
DESCRIPTION
The file contains the address and disk layout type of the system's boot devices or lif volumes. It is used by the and HP-UX kernel control
scripts (fileset to determine how and where to update the initial boot loader. Normally the kernel's script queries the system's hardware
and creates the file. In rare cases when either the system configuration cannot be automatically determined or additional and/or alternate
boot devices should be automatically updated, the administrator must edit the file manually.
There is one line in the file for each boot device. Each line contains the following blank-separated fields in the order shown:
disk type A flag indicating how the file system(s) on the disk are laid out. The flag must be one of the following:
Indicates that the root disk is in LVM or VERITAS Volume Manager
(VxVM) format. If LVM or VxVM mirrors are used, then each of the "mirrors" must have its own line in the file.
Indicates that the root disk is in the
"whole disk" format with no partitions, but boot and swap space are reserved outside the file system.
device file The absolute path of the device special file that accesses the physical device where the boot area is located. For LVM root
disks, the device special file is the physical volume(s) returned by the command. For "whole disks" this is the device file
that references the entire disk.
Blank lines are permitted. Any line beginning with a is considered to be a comment.
DIAGNOSTICS
The Software Distributor log file contains diagnostic messages under the fileset if the file is incorrect. Most of the messages are self-
explanatory; a few warrant additional explanation:
If there are no other messages about
the file is probably empty. Otherwise, the file is not in the proper format, and the other messages will explain what the problem
is.
The specified device file does not point to a disk where there is a
lif which contains the file
Some character other than
or is in the first field of a line.
As of release 10.0, the boot areas in
must all be on the same type of disk layout.
There are characters after the
device file specification.
EXAMPLES
The boot area is on an LVM root disk:
l /dev/disk/disk7_p2
The boot area is on a whole disk layout:
w /dev/disk/disk7
WARNINGS
All of the boot devices in the file must have the same disk layout.
AUTHOR
was developed by the Hewlett-Packard Company.
FILES SEE ALSO mediainit(1), hpux(1M), hpux.efi(1M), mkboot(1M), vgdisplay(1M), lif(4), intro(7).
documentation.
bootconf(4)