From what I see you are in mirror using 2 controllers : 0/10/0... and 1/10/0...
If you look, all your LV are like :
PE is twice the value of LE ... except the one giving you trouble... only Im a bit stressed now at work, will try to finish rapidly and if no one else had helped you, join back from my laptop at home...
hi, i was trying to mirror root volume group and the command i was using didnt respond for a long time
mirrorvg -m rootvg hdisk1
I was checking rootvg and it gives below. how do i fix stale partitions?? it seems to be on hdisk1
LV NAME TYPE LPs PPs PVs LV STATE ... (2 Replies)
hi All
I have one RP 3410 server with hp-ux 11.23 mirror disk
it's lvdislay -v /dev/vg00/lvol4 shows stale in some location
Actual is current
pls help me to resolve the probem
I have check with lvsync command and vgsync
but not working
re
Rajesh (1 Reply)
There are a filesystem /GWD/appbase/projects/GRIDDB
Under this filesystem there is a directory called backup.
But When I am trying to access the backup directory ,it is showing me the following error:
# cd /GWD/appbase/projects/GRIDDB
# cd backup
-bash: cd: backup: Stale NFS file handle
... (3 Replies)
my AIX server used to have scsi disk hdisk4. Now i removed that disk. But still it is still listed in lspv. So how can i remove the stale entry of it ? (6 Replies)
HP-UX B.11.23 U ia64
I've got two users that show in "w" with long idle times but if I search for their processes I find nothing (ps -ef | grep username )
I'm not sure why "w" still sees them and if there is anything (short of a reboot) that I can do to clean them out.
Ideas? (8 Replies)
Any package that I try to install, is giving an error of 'lock':
# pkgadd -d openssl-1.0.0g-sol10-sparc-local
The following packages are available:
1 SMCossl openssl
(sparc) 1.0.0g
Select package(s) you wish to process (or 'all' to process
all packages).... (2 Replies)
Hi friends,
the paging lv hd6 is in stale condition
hd6 paging 48 96 2 open/stale N/A
And i'am getting the following alerts in the server 333BD283 0811044814 U S LVDD Bad block detected with no relocation al
333BD283 0811041114 U S LVDD ... (1 Reply)
Hi everybody,
I have a little problem with my AIX 6.1, PowerHA 6.1 LVM mirror. After problem with SAN pathing of our one Datacenter, I have LV at stale state.
# lsvg cpsdata2vg
VOLUME GROUP: cpsdata2vg VG IDENTIFIER: 00fb518c00004c0000000169445f4c2c
VG STATE: ... (6 Replies)
Discussion started by: Necronomic
6 Replies
LEARN ABOUT NETBSD
ixpide
IXPIDE(4) BSD Kernel Interfaces Manual IXPIDE(4)NAME
ixpide -- PCI IDE disk controllers driver
SYNOPSIS
ixpide* at pci? dev ? function ? flags 0x0000
DESCRIPTION
The ixpide driver supports the ATI Technologies IXP IDE controller, and provides the interface with the hardware for the ata(4) driver.
The 0x0002 flag forces the ixpide driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debugging
aid, or to work around problems where the IDE controller is wired up to the system incorrectly.
HARDWARE
The supported IDE controllers are
o ATI SB200
o ATI SB300
o ATI SB400, Parallel ATA
o ATI SB400, Serial ATA
o ATI SB700, Serial and Parallel ATA
SEE ALSO ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)CAVEATS
Some SB700 controllers can hang under load when Native IDE mode is selected in the system BIOS, but work fine in AHCI mode.
BSD October 16, 2008 BSD