USB-Ethernet/Ethernet-USB Post: 302903626

8 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Ethernet

We are trying to Establish Network using Linux.Now we are facing the problem in configring Ethernet.In out network we are giving eth0 in server and activating it at the boot time,so it is activating as it is but when we define the Ethernet of node on server and allowing it to activate at boot time...

2. Solaris

Quad Ethernet

I have a Quad Ethernet card in a 220R. 2 ports activated. Each has its own hostname file and both hostnames are in the hosts file. I want both ports to have the same IP address so we can use the 2nd port in case we lose communication on the port. On bootup, the box gives me: SIOCSLIFFLAGS:...

3. AIX

ethernet down

Hello everyone I have a problem with one server, has Aix 5.3 in the errpt has this message IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION F3931284 0105133009 I H ent0 ETHERNET NETWORK RECOVERY MODE EC0BCCD4 0105133009 T H ent0 ETHERNET DOWN F3931284 ...

4. Solaris

Ethernet Port Name

I have a new Sun 440 and I am trying to configure it. Non of the Ethernet ports are enabled; when I issue "ifconfig -a" it returns nothing. Is there a way to know the available port name (e.g. ce, bge, etc.) by running a command or so ?

5. Solaris

ethernet

my solris box network is unreachable how to solve this ipaddress assiagning and entry in vi /etc/host how to solve network is unreachable

6. Solaris

solaris ethernet card and mounting usb drives

I had installed soalris 10 on my dell vostro 1400.It had installed succefully. If i type ifconfig -a it is showing only my loop back adpater. So how to tell me how to mount my usb drive and how to configure my lan ethernet card,My lan ethernet card is Broadcom. Tell me step...

7. UNIX for Dummies Questions & Answers

USB-USB cable between linux and windows computers

Is there an easy way to setup a cross-over cable (USB-USB) between a linux box and a windows PC? My 2 machines are next to each other but I really do not want to keep transfering my files using my USB drive. Thanks!

8. AIX

vio server ethernet to vio client ethernet(concepts confusing)

Hi In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID. Similarly how does the vio client partition gets the virtual ethernet scsi client adapter...

LEARN ABOUT FREEBSD

hcseriald

HCSERIALD(8)						    BSD System Manager's Manual 					      HCSERIALD(8)

NAME

     hcseriald -- supervise serial Bluetooth devices

SYNOPSIS

     hcseriald [-dh] -f device -n node_name [-s speed]

DESCRIPTION

     The hcseriald utility handles serial Bluetooth devices.  It does one simple thing: it opens the specified serial device, sets the device
     parameters, and pushes the H4 line discipline.

     The options are as follows:

     -d      Do not disassociate from the controlling terminal, i.e., run in foreground.

     -f device
	     Callout device name.  Example: -f /dev/cuau0.

     -h      Display usage message and exit.

     -n node_name
	     Set H4 Netgraph node name.  Example: -n sio0.

     -s speed
	     Set serial device speed to speed.	Example: -s 115200.

FILES

     /var/run/hcserial.*.pid  Process ID of the currently running hcseriald daemon.  Where * is an H4 Netgraph node name.

SEE ALSO

     ng_h4(4), ng_hci(4), tty(4), hccontrol(8)

AUTHORS

     Maksim Yevmenkin <m_evmenkin@yahoo.com>

BSD
								   June 14, 2002							       BSD