USB-Ethernet/Ethernet-USB Post: 302903621

8 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Ethernet

We are trying to Establish Network using Linux.Now we are facing the problem in configring Ethernet.In out network we are giving eth0 in server and activating it at the boot time,so it is activating as it is but when we define the Ethernet of node on server and allowing it to activate at boot time...

2. Solaris

Quad Ethernet

I have a Quad Ethernet card in a 220R. 2 ports activated. Each has its own hostname file and both hostnames are in the hosts file. I want both ports to have the same IP address so we can use the 2nd port in case we lose communication on the port. On bootup, the box gives me: SIOCSLIFFLAGS:...

3. AIX

ethernet down

Hello everyone I have a problem with one server, has Aix 5.3 in the errpt has this message IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION F3931284 0105133009 I H ent0 ETHERNET NETWORK RECOVERY MODE EC0BCCD4 0105133009 T H ent0 ETHERNET DOWN F3931284 ...

4. Solaris

Ethernet Port Name

I have a new Sun 440 and I am trying to configure it. Non of the Ethernet ports are enabled; when I issue "ifconfig -a" it returns nothing. Is there a way to know the available port name (e.g. ce, bge, etc.) by running a command or so ?

5. Solaris

ethernet

my solris box network is unreachable how to solve this ipaddress assiagning and entry in vi /etc/host how to solve network is unreachable

6. Solaris

solaris ethernet card and mounting usb drives

I had installed soalris 10 on my dell vostro 1400.It had installed succefully. If i type ifconfig -a it is showing only my loop back adpater. So how to tell me how to mount my usb drive and how to configure my lan ethernet card,My lan ethernet card is Broadcom. Tell me step...

7. UNIX for Dummies Questions & Answers

USB-USB cable between linux and windows computers

Is there an easy way to setup a cross-over cable (USB-USB) between a linux box and a windows PC? My 2 machines are next to each other but I really do not want to keep transfering my files using my USB drive. Thanks!

8. AIX

vio server ethernet to vio client ethernet(concepts confusing)

Hi In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID. Similarly how does the vio client partition gets the virtual ethernet scsi client adapter...

LEARN ABOUT CENTOS

usb_as

usb_as(7D)							      Devices								usb_as(7D)

NAME

       usb_as - USB audio streaming driver

SYNOPSIS

       sound@unit-address

DESCRIPTION

       The usb_as driver is a USBA (Solaris USB Architecture) compliant client driver that supports the USB Audio Class 1.0 specification.

       The  usb_as  driver processes audio data messages during play and record and sets sample frequency, precision, encoding and other functions
       on request from the USB audio control driver. See usb_ac(7D).

       This driver is plumbed under the USB audio control driver and does not directly interface with the user application.

FILES

       /kernel/drv/usb_as

	   32-bit x86 ELF kernel module

       /kernel/drv/amd64/usb_as

	   64-bit x86 ELF kernel module

       /kernel/drv/sparcv9/usb_as

	   64-bit SPARC ELF kernel module

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+------------------------------+
       |      ATTRIBUTE TYPE	     |	     ATTRIBUTE VALUE	    |
       +-----------------------------+------------------------------+
       |Architecture		     |SPARC, x86, PCI-based systems |
       +-----------------------------+------------------------------+
       |Availability		     |SUNWusb			    |
       +-----------------------------+------------------------------+
       |Stability level 	     |Evolving			    |
       +-----------------------------+------------------------------+

SEE ALSO

       mixerctl(1), attributes(5), usba(7D), usb_ac(7D), audio(7I), mixer(7I), streamio(7I)

       Writing Device Drivers

       Universal Serial Bus Specification 1.0 and 1.1

       System Administration Guide: Basic Administration

       http://www.sun.com/io

DIAGNOSTICS

       In addition to being logged, the following messages may appear on the system console. All messages are formatted in the following manner:

       Warning: <device path> (usb_as<instance num>): Error Message...

       where <device path> is the physical path to the device in /devices directory.

       No bandwidth available.

	   There is no bandwidth available for the isochronous pipe. As a result, no data will be transferred during play and record.

       Operating a full/high speed audio device on a high speed port is not supported.

	   The USB software does not currently support full or high speed audio devices connected to an external USB 2.0 hub that is linked  to  a
	   port of a USB 2.0 host controller. Audio devices must be connected directly to a port of a USB 2.0 controller or to any USB 1.1 port.

       Cannot access device. Please reconnect <name>.

	   There was an error in accessing the device during reconnect. Please reconnect the device.

       Device is not identical to the previous one on this port. Please disconnect and reconnect.

	   A  USB  audio  streaming interface was hot-removed while open. A new device was hot-inserted which is not identical to the original USB
	   audio device. Please disconnect the USB device and reconnect the device to the same port.

NOTES

       The USB audio streaming interface will be power managed if the device is idle.

SunOS 5.10							    9 Oct 2004								usb_as(7D)