The text file contain list of members of different families.
The first line for each family has the family identification number and lastname e.g
The next line will list members of family that is registered e.g
What i want to achieve is to print out the members of family that is registered and add their family identity at the end of the line. e.g
Thanks a lot.
Last edited by Don Cragun; 05-17-2014 at 01:47 AM..
Reason: Add CODE tags again.
Hi,
I want to print only lines in between two strings and not the strings using awk.
Eg:
OUTPUT
top 2
bottom 1
left 0
right 0
page 66
END
I want to print into a new file only
top 2
bottom 1
left 0... (4 Replies)
Hi experts,
You cool guys already given me the awk script below-
awk '/9366109380/,printed==5 { ++printed; print; }' 2008-09-14.0.log
Morever, i have one more things-
when i awk 9366109380, i can also see the Upper 3 lines as well as below 5 lines of that string.
Line 1.... (3 Replies)
Hi All,
I have a file in which i want to print all the lines between 2 defined strings. Ex- I have file with data as follows
STEP1:-
----- has some 20 -30 lines of data
STEP2:-
----- has some 20 -30 lines of data
So i want to print those lines between STEP1 & STEP2. (line including STEP1)... (7 Replies)
Hi,
Please provide shell script to Remove empty lines(space) between two lines containing strings in a file.
Input File :
A1/EXT "BAP_BSC6/07B/00" 844 090602 1605
RXOCF-465 PDTR11 1
SITE ON BATTERY
A2/EXT... (3 Replies)
pls help me on this... and im really sorry because i really don't know where to start here...
FILE1
ABC DEF 10 2
DEF GHI 11 3
GHI JKL 12 5
JKL MNO 13 7
MNO PQR 14 5
requirements:
1. The third string should only be 10 or 12
2. The fourth string should only be 2 or 3
3. Prinnt... (1 Reply)
Hi all,
This should be very easy but I can't figure it out...
I have a file that looks like this:
@SRR057408.1 FW8Y5CK02R652T length=34
AGCAGTGGTATCAACGCAGAGTAAGCAGTGGTAT
+SRR057408.1 FW8Y5CK02R652T length=34
FIIHFF6666?=:88@@@BBD:::?@ABBAAA>8
@SRR057408.2 FW8Y5CK02TBMHV length=52... (1 Reply)
Hi,
I have two files. 1st file has 1 column (huge file containing ~19200000 lines) and 2nd file has 2 columns (small file containing ~6000 lines).
#################################
huge_file.txt
a
a
ab
b
##################################
small_file.txt
a 1.5
b 2.5
ab ... (4 Replies)
The question is not as simple as the title... I have a file, it looks like this
<string name="string1">RZ-LED</string>
<string name="string2">2.0</string>
<string name="string2">Version 2.0</string>
<string name="string3">BP</string>
I would like to check for duplicate entries of... (11 Replies)
Hello,
I can extract lines in a file, between two strings but only one time.
If there are multiple occurencies, my command show only one block.
Example, monfichier.txt contains :
debut_sect
texte L1
texte L2
texte L3
texte L4
fin_sect
donnees inutiles 1
donnees inutiles 2
... (8 Replies)
Hello everyone,
Maybe somebody could help me with an awk script.
I have this input (field separator is comma ","):
547894982,M|N|J,U|Q|P,98,101,0,1,1
234900027,M|N|J,U|Q|P,98,101,0,1,1
234900023,M|N|J,U|Q|P,98,54,3,1,1
234900028,M|H|J,S|Q|P,98,101,0,1,1
234900030,M|N|J,U|F|P,98,101,0,1,1... (2 Replies)
Discussion started by: Ophiuchus
2 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)