Accessible Site...Without a Domain Post: 302886126

9 More Discussions You Might Find Interesting

1. IP Networking

port access to site to site VPN

Setup a site to site VPN between two cisco routers. One of the site locations is unable to access ports such as https://example.com:9001 How do I let them go into port 9001? They can ssh, ftp, telnet and everything else. Is this a VPN issue or ACL access issue? I put permit ip host...

2. Windows & DOS: Issues & Discussions

How to: Linux BOX in Windows Domain (w/out joining the domain)

Dear Expert, i have linux box that is running in the windows domain, BUT did not being a member of the domain. as I am not the System Administrator so I have no control on the server in the network, such as modify dns entry , add the linux box in AD and domain record and so on that relevant. ...

3. Infrastructure Monitoring

SF4800 SC not accessible thru network

Hi All, I have my SC setup as attached below but I am having problem accessing the port thru network. sc0 was accessible only after i failed over the configuratios to sc1 (now then sc1 was not pingable :(). Just wondering is there anything wrong with my sc settings? Appreciate your advice. ...

4. UNIX for Dummies Questions & Answers

NameServer not accessible

Hi everybody I am facing a little problem with names servers. I have a VPS with Kloxo installed on it I have registered 2 name servers (i.e. ns1.domain.com and ns2.domain.com) past one month. These nameservers are not accessible yet. I have check the nameserver on internic site and they are...

5. Linux

graphical environmental of CentOS is not accessible

Hello everyone, I am using centOS 5.4. and in the Graphical environment when i executed command system-config-kickstart , at the same time i lost my graphical environment now i am not able to access it, but i can access my system by CLI mode....kindly suggest me that how can i repare my...

6. UNIX for Dummies Questions & Answers

Testing NAS /mountpoint accessible

Hello. What's the best way to ensure that a NFS filesystem mounted from a disk-cabine (NAS) is accessible? My proposal: 1. ping to the ip of the cabine 2. verify filesystem is mounted 3. touch a file inside the /mountpoint Any other suggestions? Thank you!

7. IP Networking

How to establish site to site vpn - Linux machine and cisco asa?

Hi, I am trying to establish vpn between my linux server and cisco asa at client side. I installed openswan on my cent os. Linux Server eth0 - 182.2.29.10 Gateway - 182.2.29.1 eth1 - 192.9.200.75 I have simple IPtables Like WAN="eth0" LAN="eth1"

8. IP Networking

Does cisco 1921 router support site to site VPNs using IPSec?

Q: "Does Cisco 1921 router support,, act as an endpoint for, site to site VPNs using IPSec? If so, how many? " A: If you get the Cisco 1921/k9 with the security services bundle then it will have built in security features. Cisco, typically includes IP Sec tunnels I believe as part of that...

9. IP Networking

IPSec Openswan Site to Site VPN - Big Pain

Hi @all, I try to connect 2 LANs with IPSec/Openswan LAN 1: 192.168.0.0/24 LAN 2: 192.168.1.0/24 This is my Config: conn HomeVPN # # Left security gateway, subnet behind it, nexthop toward right. left=192.168.1.29 ...

LEARN ABOUT PHP

asadmin-start-domain

asadmin-start-domain(1AS)					   User Commands					 asadmin-start-domain(1AS)

NAME

       asadmin-start-domain, start-domain - starts the given domain

SYNOPSIS

       start-domain [--domaindir install_dir/domains] [--terse=false] [--echo=false] [--verbose=false] [--debug] [domain_name]

       start-domain  starts the specified domain. If there is only one domain in the default domain directory (install_dir/domains), then no oper-
       and is required to start the domain. However, if there is more than one domain, the domain operand must be specified. This command can only
       be run locally.

OPTIONS

       --domaindir	       directory where the domain is to be started. If specified, path must be accessible in the filesystem. If not speci-
			       fied, the domain is started in the default install_dir/domains directory.

       --terse		       indicates that any output data must be very concise, typically avoiding human-friendly sentences and favoring well-
			       formatted data for consumption by a script. Default is false.

       --echo		       setting to true will echo the command line statement on the standard output. Default is false.

       --verbose	       by  default this flag is set to false. If set to true, detailed server startup output is displayed. Press CTRL-C to
			       kill the server. Press CTRL- to print a thread dump.

       --debug		       by default this flag is set to false. If set to true, the server is started in debug mode and prints the JPDA  port
			       on the console.

OPERANDS

       domain_name	       name of the domain. Must be a unique name.

       Example 1: Using start-domain

       asadmin> start-domain sampleDomain
       Starting Domain sampleDomain, please wait.
       Domain sampleDomain started

       Where: the sampleDomain domain is started.

EXIT STATUS

       0		       command executed successfully

       1		       error in executing the command

       asadmin-create-domain(1AS), asadmin-delete-domain(1AS), asadmin-stop-domain(1AS), asadmin-list-domains(1AS)

J2EE 1.4 SDK							    March 2004						 asadmin-start-domain(1AS)