Sponsored Content
Top Forums UNIX for Advanced & Expert Users Error with trying to resize software raid device Post 302883208 by Narnie on Saturday 11th of January 2014 10:43:43 PM
Old 01-11-2014
It turns out that the directions actually left out steps. For anyone reading this thread, the step is after removing the offending drive by failing it first with:

Code:
# mdadm /dev/md0 --fail /dev/sda6

where /dev/md0 needs changed to your device as does /dev/sda6.

Then remove it with:

Code:
# mdadm /dev/md0 --remove /dev/sda6

changing the devices to meet your system.

What is left out I'm sure is that the partition needs erased. Then it needs rebuilt with the larger partition. Then added to the array.

Code:
# mdadm /dev/md0 --add /dev/sda6

Let it resync, then repeat on the other array member. I was trying to resize it and keep the info, which was a dumb thought.

I didn't get to follow this procedure because my array wouldn't sync due to a bad sector unrecoverable I/O error, so I had to backup, copy to a brand newly built array which I just created with the partition expanded in the first place.
 

9 More Discussions You Might Find Interesting

1. SuSE

Raid software besides Veritass

Hello Lunix people, I am looking for Raid software or solution besides Veritas. Veritas has some great software but are way too costly. Does anyone know of good raid software that but NOT Veritas. I need the funcations but not the cost. (7 Replies)
Discussion started by: xtmeisel
7 Replies

2. UNIX for Advanced & Expert Users

Software RAID ...

Hi all, I m just trying using software RAID in RHEL 4, without problem , then i wanna simulate if disk 1 is fail (thereis an bootloader), i plug off my 1st disk. My problems is the second disk cannot boot? just stuck in grub, the computer is hang. Sorry for poor concept in RAID? I use a RAID 1.... (0 Replies)
Discussion started by: blesets
0 Replies

3. HP-UX

Software RAID (0+1)

Hi! A couple of months ago a disk failed in our JBOD cabinett and I have finally got a new disk to replace it with. It was a RAID 0 so we have to create and configure the whole thing again. First we thought of RAID 1+0 but it seems you can't do this with LVM. If you read my last thread, you can... (0 Replies)
Discussion started by: hoff
0 Replies

4. Linux

Software RAID on Linux

Hey, I have worked with Linux for some time, but have not gotten into the specifics of hard drive tuning or software RAID. This is about to change. I have a Dell PowerEdge T105 at home and I am purchasing the following: 1GBx4 DDR2 ECC PC6400 RAM Rosewill RSV-5 E-Sata 5 bay disk enclosure... (6 Replies)
Discussion started by: mark54g
6 Replies

5. Red Hat

Software RAID doubt

hi friends, I am having issues with adding a spare device to a failed array. I have created RAID 1 with 3 partitions using mdadm command. Later I added a spare with mdadm --add /dev/md0 /dev/sdb6 This works fine and when I check this with mdadm --detail command it just sits there as a spare... (7 Replies)
Discussion started by: saagar
7 Replies

6. Filesystems, Disks and Memory

Software RAID

Hello, My company has inherited a Centos based machine that has 7 hard drives and a software based raid system. Supposedly one of the drives has failed. I need to replace the hardrive. How can I about telling which hard drive needs replacing? I have looked in the logs and there clearly is a... (5 Replies)
Discussion started by: mojoman
5 Replies

7. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help. (2 Replies)
Discussion started by: presul
2 Replies

8. Red Hat

Software RAID configuration

We have configured software based RAID5 with LVM on our RHEL5 servers. Please let us know if its good to configure software RAID on live environment servers. What can be the disadvantages of software RAID against hardware RAID (4 Replies)
Discussion started by: mitchnelson
4 Replies

9. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My... (4 Replies)
Discussion started by: KhawHL
4 Replies
HD(4)							     Linux Programmer's Manual							     HD(4)

NAME
hd - MFM/IDE hard disk devices DESCRIPTION
The hd* devices are block devices to access MFM/IDE hard disk drives in raw mode. The master drive on the primary IDE controller (major device number 3) is hda; the slave drive is hdb. The master drive of the second controller (major device number 22) is hdc and the slave hdd. General IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the partition on that physical drive. The first form, hdX, is used to address the whole drive. Partition numbers are assigned in the order the partitions are discovered, and only nonempty, nonextended partitions get a number. However, partition numbers 1-4 are given to the four partitions described in the MBR (the "primary" partitions), regardless of whether they are unused or extended. Thus, the first logi- cal partition will be hdX5. Both DOS-type partitioning and BSD-disklabel partitioning are supported. You can have at most 63 partitions on an IDE disk. For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS "primary" partition on the second one. They are typically created by: mknod -m 660 /dev/hda b 3 0 mknod -m 660 /dev/hda1 b 3 1 mknod -m 660 /dev/hda2 b 3 2 ... mknod -m 660 /dev/hda8 b 3 8 mknod -m 660 /dev/hdb b 3 64 mknod -m 660 /dev/hdb1 b 3 65 mknod -m 660 /dev/hdb2 b 3 66 ... mknod -m 660 /dev/hdb8 b 3 72 chown root:disk /dev/hd* FILES
/dev/hd* SEE ALSO
chown(1), mknod(1), sd(4), mount(8) COLOPHON
This page is part of release 3.25 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/. Linux 1992-12-17 HD(4)
All times are GMT -4. The time now is 03:26 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy