SCO 6.0.0 hangsat install cdrom verify Post: 302879327

10 More Discussions You Might Find Interesting

1. SCO

sco openserver 5.0.2 cdrom

Hello!!!! Salut!!!! I m looking for sco openserver 5.0.2 package to install it on my compaq server prosignia 200. I don't fount it on our local market. Is it possible to me to download it from the net??? Je suis � la recherche de SCO OPENSERVER 5.0.2 pour son installation (requise) sur mon...

2. SCO

sco backup using CDROM

I've installed a CD-RW rom using SCO OSR 5.0.7, but I cannot open the dev to perform backup

3. Solaris

"boot cdrom - install" is not possible

Hi all, I've this problem: I want to install Solaris 10 on Sun Enterprise 450 but when I type "boot cdrom - install" command from OK PROMPT I read this message. "Can't open input device". I attempt to change "cdrom" with its "alias", after to have typing "devalias" command, but nothing! ...

4. SCO

SCO Backups and Verify Log

Hi, I am after using TAR to backup to tape in SCO 5 but i want to produce a log that tells me that the backup has been successful. Any Suggestions

5. Solaris

x86 Install stops with a /cdrom error

Hi, I have a DVD burned iso image of Solaris 10 for x86 and trying to install it on an PowerSpec PC with 2 - DVD drives. The DVD image won't boot from the top DVD drive so I put it in the second one and it boots. The installation gets to the following prompt: "You may need to manually eject the...

6. Solaris

Boot cdrom - install

Hi community, Does anyone can tell me the difference between "boot cdrom" and "boot cdrom - install" ? Thank you very much:D

7. Linux

How to install linux in a system without cdrom, usb boot, floppy, other OS?

Hello to everyone, I am new to linux and I want to move to this system after bad experiences with windows. I have also a particular problem. An old laptop is probably able to handle just linux at this point of its life. The cdrom is gone, the bios doesn't have usb boot support, there is no...

8. SCO

Install Hang OpenServer 6 - SATA CDROM

Hi all Can anybody offer any help with installing Openserver 6 on a Supermicro server? I am familiar with installing OS5, but this is my first time with v6. The PC is fitted with Supermicro X8DTL-I Dual Xeon motherboard and 2 Xeon E5620 processors, and 16Gb Ram, LSI MegaRaid SAS8708 8 port...

9. SCO

Getting error sco unix 507 from cdrom:no controller for device you chosen

Installing SCO UNIX 507 on Dell Poweredge T610. It has no floppy so I downloaded the BTLD onto CD from SCO site to load without floppy drive. BTLD loads ok. when i get to the Media to be used, no matter what option i chose i get the error: No controller for device you have chosen. During bootup you...

10. Solaris

HOW TO INSTALL os from cdrom from console?

Hi all, I need to do installation via console , a image is stored in cdrom. The OS is Sun Solaris , Please tell me how to go about it. I just need to know the first command and thereafter. Please advise. Thanks Manali

LEARN ABOUT NETBSD

mfi

MFI(4)							   BSD Kernel Interfaces Manual 						    MFI(4)

NAME

     mfi -- LSI Logic & Dell MegaRAID SAS RAID controller

SYNOPSIS

     mfi* at pci? dev ? function ?

DESCRIPTION

     The mfi driver provides support for the MegaRAID SAS family of RAID controllers, including:

	   -   Dell PERC 5/e, PERC 5/i, PERC 6/e, PERC 6/i
	   -   Intel RAID Controller SRCSAS18E, SRCSAS144E
	   -   LSI Logic MegaRAID SAS 8208ELP, MegaRAID SAS 8208XLP, MegaRAID SAS 8300XLP, MegaRAID SAS 8308ELP, MegaRAID SAS 8344ELP, MegaRAID
	       SAS 8408E, MegaRAID SAS 8480E, MegaRAID SAS 8708ELP, MegaRAID SAS 8888ELP, MegaRAID SAS 8880EM2, MegaRAID SAS 9260-8i
	   -   IBM ServeRAID M1015, ServeRAID M5014

     These controllers support RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50 and RAID 60 using either SAS or SATA II drives.

     Although the controllers are actual RAID controllers, the driver makes them look just like SCSI controllers.  All RAID configuration is done
     through the controllers' BIOSes.

     mfi supports monitoring of the logical disks in the controller through the bioctl(8) and envstat(8) commands.

EVENTS

     The mfi driver is able to send events to powerd(8) if a logical drive in the controller is not online.  The state-changed event will be sent
     to the /etc/powerd/scripts/sensor_drive script when such condition happens.

SEE ALSO

     intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8)

HISTORY

     The mfi driver first appeared in NetBSD 4.0.

BSD
								  March 22, 2012							       BSD