SCO 6.0.0 hangsat install cdrom verify Post: 302879317

10 More Discussions You Might Find Interesting

1. SCO

sco openserver 5.0.2 cdrom

Hello!!!! Salut!!!! I m looking for sco openserver 5.0.2 package to install it on my compaq server prosignia 200. I don't fount it on our local market. Is it possible to me to download it from the net??? Je suis � la recherche de SCO OPENSERVER 5.0.2 pour son installation (requise) sur mon...

2. SCO

sco backup using CDROM

I've installed a CD-RW rom using SCO OSR 5.0.7, but I cannot open the dev to perform backup

3. Solaris

"boot cdrom - install" is not possible

Hi all, I've this problem: I want to install Solaris 10 on Sun Enterprise 450 but when I type "boot cdrom - install" command from OK PROMPT I read this message. "Can't open input device". I attempt to change "cdrom" with its "alias", after to have typing "devalias" command, but nothing! ...

4. SCO

SCO Backups and Verify Log

Hi, I am after using TAR to backup to tape in SCO 5 but i want to produce a log that tells me that the backup has been successful. Any Suggestions

5. Solaris

x86 Install stops with a /cdrom error

Hi, I have a DVD burned iso image of Solaris 10 for x86 and trying to install it on an PowerSpec PC with 2 - DVD drives. The DVD image won't boot from the top DVD drive so I put it in the second one and it boots. The installation gets to the following prompt: "You may need to manually eject the...

6. Solaris

Boot cdrom - install

Hi community, Does anyone can tell me the difference between "boot cdrom" and "boot cdrom - install" ? Thank you very much:D

7. Linux

How to install linux in a system without cdrom, usb boot, floppy, other OS?

Hello to everyone, I am new to linux and I want to move to this system after bad experiences with windows. I have also a particular problem. An old laptop is probably able to handle just linux at this point of its life. The cdrom is gone, the bios doesn't have usb boot support, there is no...

8. SCO

Install Hang OpenServer 6 - SATA CDROM

Hi all Can anybody offer any help with installing Openserver 6 on a Supermicro server? I am familiar with installing OS5, but this is my first time with v6. The PC is fitted with Supermicro X8DTL-I Dual Xeon motherboard and 2 Xeon E5620 processors, and 16Gb Ram, LSI MegaRaid SAS8708 8 port...

9. SCO

Getting error sco unix 507 from cdrom:no controller for device you chosen

Installing SCO UNIX 507 on Dell Poweredge T610. It has no floppy so I downloaded the BTLD onto CD from SCO site to load without floppy drive. BTLD loads ok. when i get to the Media to be used, no matter what option i chose i get the error: No controller for device you have chosen. During bootup you...

10. Solaris

HOW TO INSTALL os from cdrom from console?

Hi all, I need to do installation via console , a image is stored in cdrom. The OS is Sun Solaris , Please tell me how to go about it. I just need to know the first command and thereafter. Please advise. Thanks Manali

LEARN ABOUT NETBSD

jmide

JMIDE(4)						   BSD Kernel Interfaces Manual 						  JMIDE(4)

NAME

     jmide -- JMicron Technology JMB36x PCIe to SATA II/PATA controller driver

SYNOPSIS

     jmide* at pci? dev ? function ? flags 0x0000
     ahcisata* at jmide?

DESCRIPTION

     The jmide driver supports the JMicron Technology JMB36x IDE controllers.

     These PCI-e controllers exist in different flavors (1 or 2 PATA Ultra/133 ports and/or 1 or 2 SATA-II ports), and are highly flexible.  The
     SATA ports can be attached to the integrated AHCI controller or attached to the PCI IDE channels in PATA emulation, in either single-drive
     emulation on each PCI IDE channels, or in master/slave emulation on one of the PCI IDE channels.

     When enabled, the AHCI controller can either be on the PCI function 0 or function 2.  The PCI IDE controller can also be on either PCI func-
     tion, and can share the PCI function with AHCI.  The jmide driver supports both the AHCI controller and PCI IDE controller in various config-
     urations.

SEE ALSO

     ahcisata(4), ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)

AUTHORS

     The jmide driver was written by Manuel Bouyer.

BSD
								   July 2, 2007 							       BSD