12-04-2013
Hard Drive stuck in populated state?
Hi all,
I ended up replacing a failed disk drive on my power 7. I had a few issues with unmirroring as it had a stale logical volume. I ended up finally getting it to unmirror the rootvg. I had an empty space in slot 3 so I ended up putting the new disk in slot 3. It configured to hdisk0 with no problems but I decided I wanted to move the new disk to slot 1 where the old bad drive was. I did a rmdev -rdl hdisk0 and ran diags. I took the drive out of slot 3 with no problems. I ran command to insert drive into slot 1. Now the drive is stuck in "populated" state. I decided to run cfgmgr again and the drive will not configure itself. I thought rmdev -Rdl scrubbed out hdisk0 when it was in slot3. I look in the errpt log and see sas fabric device errors when I inserted the drive in slot 1. I was wondering if maybe the ODM is conflicted or if I have possible bad slot?
on a side note, if I shut the machine down and move the drive to a different slot(same sas controller) while its mirrored(rootvg), will this cause any issues?
Thanks
9 More Discussions You Might Find Interesting
1. Linux
Does anybody know what command will bring up my harddrive and how much room is left on it? (13 Replies)
Discussion started by: byblyk
13 Replies
2. Filesystems, Disks and Memory
Im a newbie at unix and need some help with my MO disc, which is stuck in the MO drive. I cant get it out. I have tried several commands but nothing works, so if there is some fullproof way to get it out i would be thankful if someone could tell me!
/O (1 Reply)
Discussion started by: Olink
1 Replies
3. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
4. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
5. Ubuntu
Hi, I just downloaded and installed Ubuntu yesterday. It's the first time I have used it, so bear with me. I think I figured out how to get my sound drivers to work (X-Fi)... I had downloaded some OSS drivers, bout to go test them.
But what I really want to know is... I have 2 hard drive,... (2 Replies)
Discussion started by: blind melon
2 Replies
6. Solaris
One of my zone got stuck while rebooting in shutting down state. I tried following
1. Halt the zone with zoneadm -z zone1 halt
2. kill zoneadmd process for that zone and halt the zone
but none helped me. How can i shut it down and restart it ?
---------- Post updated 10-09-09 at 01:54 AM... (0 Replies)
Discussion started by: fugitive
0 Replies
7. UNIX for Advanced & Expert Users
Hi Experts,
I am executing "svn" checkout command through my java code on a freeBSD machine. SVN checkout gets started , but when I run "top" command on my freebsd machine, I have observed that "svn" processes are stuck in "pipewr" state.
Any pointer for this problem?
Thanks,
akash (0 Replies)
Discussion started by: akash.mahakode
0 Replies
8. BSD
Hi Experts,
I am executing "svn" checkout command through my java code on a freeBSD machine. SVN checkout gets started , but when I run "top" command on my freebsd machine, I have observed that "svn" processes are stuck in "pipewr" state.
Any pointer for this problem?
Thanks,
akash (0 Replies)
Discussion started by: akash.mahakode
0 Replies
9. Red Hat
Im trying to install a fresh version of Fedora 17. I keep getting formating errors when trying to reformat the hard drive. I recieve errors as well I I try to use the entire disk for the install instead of creat new partitions from scratch. I even tried fromatting the disk using PartedMagic and... (7 Replies)
Discussion started by: Fingerz
7 Replies
LEARN ABOUT NETBSD
lvdisplay
LVDISPLAY(8) System Manager's Manual LVDISPLAY(8)
NAME
lvdisplay - display attributes of a logical volume
SYNOPSIS
lvdisplay [-c|--colon] [-d|--debug] [-h|-?|--help] [--ignorelockingfailure] [--maps] [-P|--partial] [-v|--verbose] LogicalVolumePath [Logi-
calVolumePath...]
DESCRIPTION
lvdisplay allows you to see the attributes of a logical volume like size, read/write status, snapshot information etc.
lvs (8) is an alternative that provides the same information in the style of ps (1). lvs is recommended over lvdisplay.
OPTIONS
See lvm for common options.
-c, --colon
Generate colon separated output for easier parsing in scripts or programs. N.B. lvs (8) provides considerably more control over the
output.
The values are:
* logical volume name
* volume group name
* logical volume access
* logical volume status
* internal logical volume number
* open count of logical volume
* logical volume size in sectors
* current logical extents associated to logical volume
* allocated logical extents of logical volume
* allocation policy of logical volume
* read ahead sectors of logical volume
* major device number of logical volume
* minor device number of logical volume
-m, --maps
Display the mapping of logical extents to physical volumes and physical extents.
Examples
"lvdisplay -v /dev/vg00/lvol2" shows attributes of that logical volume. If snapshot logical volumes have been created for this original
logical volume, this command shows a list of all snapshot logical volumes and their status (active or inactive) as well.
"lvdisplay /dev/vg00/snapshot" shows the attributes of this snapshot logical volume and also which original logical volume it is associated
with.
SEE ALSO
lvm(8), lvcreate(8), lvscan(8)
Sistina Software UK LVM TOOLS 2.02.44-cvs (02-17-09) LVDISPLAY(8)