12-04-2013
Hard Drive stuck in populated state?
Hi all,
I ended up replacing a failed disk drive on my power 7. I had a few issues with unmirroring as it had a stale logical volume. I ended up finally getting it to unmirror the rootvg. I had an empty space in slot 3 so I ended up putting the new disk in slot 3. It configured to hdisk0 with no problems but I decided I wanted to move the new disk to slot 1 where the old bad drive was. I did a rmdev -rdl hdisk0 and ran diags. I took the drive out of slot 3 with no problems. I ran command to insert drive into slot 1. Now the drive is stuck in "populated" state. I decided to run cfgmgr again and the drive will not configure itself. I thought rmdev -Rdl scrubbed out hdisk0 when it was in slot3. I look in the errpt log and see sas fabric device errors when I inserted the drive in slot 1. I was wondering if maybe the ODM is conflicted or if I have possible bad slot?
on a side note, if I shut the machine down and move the drive to a different slot(same sas controller) while its mirrored(rootvg), will this cause any issues?
Thanks
9 More Discussions You Might Find Interesting
1. Linux
Does anybody know what command will bring up my harddrive and how much room is left on it? (13 Replies)
Discussion started by: byblyk
13 Replies
2. Filesystems, Disks and Memory
Im a newbie at unix and need some help with my MO disc, which is stuck in the MO drive. I cant get it out. I have tried several commands but nothing works, so if there is some fullproof way to get it out i would be thankful if someone could tell me!
/O (1 Reply)
Discussion started by: Olink
1 Replies
3. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
4. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
5. Ubuntu
Hi, I just downloaded and installed Ubuntu yesterday. It's the first time I have used it, so bear with me. I think I figured out how to get my sound drivers to work (X-Fi)... I had downloaded some OSS drivers, bout to go test them.
But what I really want to know is... I have 2 hard drive,... (2 Replies)
Discussion started by: blind melon
2 Replies
6. Solaris
One of my zone got stuck while rebooting in shutting down state. I tried following
1. Halt the zone with zoneadm -z zone1 halt
2. kill zoneadmd process for that zone and halt the zone
but none helped me. How can i shut it down and restart it ?
---------- Post updated 10-09-09 at 01:54 AM... (0 Replies)
Discussion started by: fugitive
0 Replies
7. UNIX for Advanced & Expert Users
Hi Experts,
I am executing "svn" checkout command through my java code on a freeBSD machine. SVN checkout gets started , but when I run "top" command on my freebsd machine, I have observed that "svn" processes are stuck in "pipewr" state.
Any pointer for this problem?
Thanks,
akash (0 Replies)
Discussion started by: akash.mahakode
0 Replies
8. BSD
Hi Experts,
I am executing "svn" checkout command through my java code on a freeBSD machine. SVN checkout gets started , but when I run "top" command on my freebsd machine, I have observed that "svn" processes are stuck in "pipewr" state.
Any pointer for this problem?
Thanks,
akash (0 Replies)
Discussion started by: akash.mahakode
0 Replies
9. Red Hat
Im trying to install a fresh version of Fedora 17. I keep getting formating errors when trying to reformat the hard drive. I recieve errors as well I I try to use the entire disk for the install instead of creat new partitions from scratch. I even tried fromatting the disk using PartedMagic and... (7 Replies)
Discussion started by: Fingerz
7 Replies
fddisk(8) System Manager's Manual fddisk(8)
NAME
fddisk - FDI disk maintenance utility
SYNOPSIS
/sbin/fddisk options special
OPTIONS
Unless this option is specified, an attempt to format or to install a file system fails in two cases. The first failure occurs when the
device has been opened since the media was inserted. The second failure occurs if the device is currently opened by another process. For-
mats the media to the density appropriate for that media. Copies a hex dump of sector number PSN to stdout. Uses the interleave factor
nnn for formatting. If specified, ccc indicates an additional intercylinder interleave. Copies a packed-C hex dump of the entire disk to
stdout. Specifies silent mode. This option blocks informational messages from appearing on stderr. Reads the entire media. The command
fails if the utility finds a bad sector. Waits for media to be inserted into the drive if none is present. Waits for new media to be
inserted into the drive if none is present or if the current media has been opened since it was last inserted. Reads the disk and reports
on the format of the disk.
OPERANDS
Specifies an unmounted, raw device pathname. This device must be an FDI interface (fd).
DESCRIPTION
The fddisk utility, an FDI (integrated Floppy Disk Interface) disk maintenance program, can format a floppy disk, scan a floppy disk for
bad blocks, and read and write selected blocks. It can be used in shell scripts for checking the status of floppy disks. Such status
checks include checking for or waiting for the presence of media, and checking for or waiting for the user to change the media.
RESTRICTIONS
The fddisk utility has the following restrictions: You must have read/write access to the device. The device must not be mounted. The
program can only be used with a 3.5-inch floppy disk in the RX26 drive. In some cases, it might not be possible to format a floppy disk at
a higher density than it is already formatted. If this situation occurs, the floppy disk must be bulk erased before it can be reformatted
at a higher density.
EXAMPLES
This example formats a floppy disk in drive zero: # /sbin/fddisk -fmt /dev/rdisk/floppy0a This example formats a floppy disk in drive zero
when the disk has been read or written since it was inserted into the drive: # /sbin/fddisk -fmt -f /dev/rdisk/floppy0a
SEE ALSO
Commands: mount(8), restore(8), uerf(8)
Files: fd(7)
fddisk(8)