I've logged a ticket with Oracle about this issue, and to their credit were very quick in coming back with a response. Apparently mpathadm has serveral associated bugs, and for accurate reporting, i'd be better off using:
Code:
# luxadm display /dev/rdsk/c6t60000970000298700009533031333037d0s2
DEVICE PROPERTIES for disk: /dev/rdsk/c6t60000970000298700009533031333037d0s2
Vendor: EMC
Product ID: SYMMETRIX
Revision: 5874
Serial Num: 700009307008
Unformatted capacity: 98305.312 MBytes
Read Cache: Enabled
Minimum prefetch: 0x0
Maximum prefetch: 0xffff
Device Type: Disk device
Path(s):
/dev/rdsk/c6t60000970000298700009533031333037d0s2
/devices/scsi_vhci/ssd@g60000970000298700009533031333037:c,raw
Controller /devices/pci@3,700000/SUNW,emlxs@0,1/fp@0,0
Device Address 50000975f0002585,16
Host controller port WWN 10000000c978d0c3
Class primary
State ONLINE
Controller /devices/pci@3,700000/SUNW,emlxs@0,1/fp@0,0
Device Address 50000975f0002589,16
Host controller port WWN 10000000c978d0c3
Class primary
State ONLINE
Controller /devices/pci@13,700000/SUNW,emlxs@0,1/fp@0,0
Device Address 50000975f0002581,16
Host controller port WWN 10000000c978d125
Class primary
State ONLINE
Controller /devices/pci@13,700000/SUNW,emlxs@0,1/fp@0,0
Device Address 50000975f000258d,16
Host controller port WWN 10000000c978d125
Class primary
State ONLINE
Which indeed showed all paths online as expected. To fix mpathadm, they've suggested I apply patch
143643-08, and a series of others. But after removing disk/configuring once more, it's reporting back ok.
hi fren
i am facing this problem
i have sun 6140 storage
30 volumes
bt my vxdisk list output is showing 37 disk
which shd nt b there
has neone faced this proble earlier
vxdiks list output is like this
SUN6140-2_0 auto - - online c4t201700A0B84853C0d2s2
SUN6140-2_1 auto - - online... (13 Replies)
I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer.
thanks (4 Replies)
Hi,
I have a sun 440, it already has LUN's configured with MPXIO.
I just had more LUNS added, I did devfsadm and cfgadm -al, and they're showing up twice in "Format". :confused:
There are no new fiber cables or HBA's involved, same physical setup, just adding LUNS.
Aren't they... (0 Replies)
When I try to configure my HBA ports on Solaris 10; I cant see any output.
bash-3.2# mpathadm list lu
bash-3.2#
I checked /kernel/drv/fp.conf file.
...
mpxio-disable="no";
...
What shall I check more? what shall I do?
---------- Post updated at 10:18 AM ---------- Previous update was... (0 Replies)
How can i remove LUN's from solaris 10 those are unmapped from SAN?
from storage side i got confirmation that they removed lun. but in my solaris box still it's visible.
i tried below.
root@globalares2.example.com #luxadm -e offline /dev/rdsk/c2t600D02310007D16C42FF09E24B5B8255d0s2... (7 Replies)
Hi
I have a server running solaris 10 in which the NetAppadmin has just presented one LUN of 200Gb, but when running:
bash-3.2# format
Searching for disks...done
c3t500A09828DE3E799d1: configured with capacity of 199.94GB
c3t500A09829DE3E799d1: configured with capacity of 199.94GB
... (5 Replies)
Hi all, I have the following LUN which is showing OK with its two paths:
DEVICE PROPERTIES for disk: /dev/rdsk/c23t500507630A3BC579d123s2
Vendor: IBM
Product ID: 2107900
Revision: 3010
Serial Num: 75WB0114900
Unformatted capacity:... (13 Replies)
Hello,
Looking for some guidance to changing how an AIX 6.1 server sees its luns. Presently they're connected via 1GB iscsi but I want to change it to 4GB fiber channel. Anyone done this before and if so is it an easy step?
I'm thinking this can be done in this order:
unmount the... (5 Replies)
We are using Solaris 11 Logical Domains. We NFS share a disk backup area from one LDom to other servers. The share is on a single 1.5 Tb LUN presented to the Control Domain, and as a virtual disk on the NFS server LDom. A 1.5 Tb zpool has been created on the LDom. We now need to provide more disk... (2 Replies)
Discussion started by: SallyB
2 Replies
LEARN ABOUT NETBSD
paths
PATHS(3) BSD Library Functions Manual PATHS(3)NAME
paths -- default system paths
SYNOPSIS
#include <paths.h>
DESCRIPTION
The <paths.h> header defines some default paths used in NetBSD. All defined constants are prefixed with _PATH. The constants include:
o The default user search path set by login(1) and associated utilities such as rshd(8). This is defined by _PATH_DEFPATH and
includes directories such as /usr/bin and /usr/local/bin.
o Default paths for some utilities and device nodes. Examples include such paths as /dev/null (_PATH_DEVNULL), /dev/mem (_PATH_MEM),
and /etc/nologin (_PATH_NOLOGIN), among others.
o Paths for some default directories such as /dev (_PATH_DEV) and /tmp (_PATH_TMP) as well as paths for some miscellaneous utilities
such as csh(1), /bin/csh (_PATH_CSHELL).
SEE ALSO whereis(1), sysexits(3), types(3), hier(7)CAVEATS
The <paths.h> header is specific to NetBSD.
BSD April 8, 2011 BSD
11-01-2013
