I have lots of tapes where files got written to X amount of positions per tape.
Is there a way to restore all files on the tape regardless of position ID?
Right now to restore files in the first position I do
I'd really like if there was a script or a command to either loop through all position ID's or simply restore the whole tape. Some tapes appear to have 300+ position ID's.
Thanks for any assistance.
Last edited by Don Cragun; 11-08-2017 at 08:55 PM..
Reason: Add missing CODE tags.
Hi. I have been having problems with restoring from a tape backup. I use the following cpio command:
find / -print | cpio -ouvB > /dev/rStp0
After running this cpio command, the screen will display all files, but when I try to read or restore the tape I get the following error:
Tape input... (1 Reply)
I have been restoring from tape some old data. I have done quite a few tapes and have had no problems until now.
The command I am running is "dd if=/dev/rmt/1hbn bs=1024 | tar -pBxF - ".
This is the second tape have have come up with the error "Not enough space". This tape has a couple of... (1 Reply)
I am trying to do a restore on a backup tape (DDS2) and am having a little trouble. For one, I dont know how the tape was made, whether is was tar, cpio, dump..etc. Anyone know how to restore a tape without knowing the format of the backup? (5 Replies)
Hello everyone
I have a tape with some information that I got
to restore, the tape was made with the fbackup
command in a hp box.
My question is that I have to restore in a Ibm
box, how can I do this ?
Thanks in advance (1 Reply)
Here is the scenario. We have an billing system that ran on SCO 5.0.6. The HP Netserver went dwon, along with SCSI disks. They are unretrievable. I installed an IDE HDD, and reinstalled SCO. I am not too familiar w/ SCO or UNIX, and need to know how to install Tape drive, and how to restore from... (11 Replies)
Hello everyone,
I am having difficulties restoring data from a tape and I was hoping someone could help me. Here it goes.
Whenever I type tar -xvf /dev/nst0, only the first file on the tape is restored which means that in the particular tape there are multiple tar files.
Can someone please... (10 Replies)
I have a T2000 server that is JumpStarted with Solaris 10 from the JumpStart server. Host name and IP address is changed after that. Then we backup the server using FLAR to tape:
root.damas# date; flarcreate -c -t -n "Sol10_cairo_image" -a "engineering@starsolutions.com" -R / /dev/rmt/0n ;... (2 Replies)
Hope someone can help me here...
I've got to restore an E450 with 300MHz cpus which was running Solaris 2.6 from tape. Regrettably the boot drive has failed.
I've access to the first release of Solaris 2.6 CD's and to a set of Solaris 9 CD's.
I remember that different E450 CPUs needed different... (1 Reply)
Hi
I recently deleted my /etc but I had a backup on tape. I was able to boot the server with a cd-rom and mounted the /c1t0d0s0 which is where the root directory resides. However when I tried to restore the backup with tar xvf /dev/rmt/0n I wasn't successful even though I was able to use the tar... (2 Replies)
Hi,
I have taken a backup of a directory on my tape in using below command
cd /backup
find * -print|backup -ivf '/dev/rmt0' '-U' |tee -a /syslogs/backup.log and output appear in below format.
a 0 rman-before-08032014
a 58403323904... (2 Replies)
Discussion started by: m_raheelahmed
2 Replies
LEARN ABOUT REDHAT
amverify
AMVERIFY(8) System Manager's Manual AMVERIFY(8)NAME
amverify - check an Amanda tape for errors
SYNOPSIS
amverify config [ slot [ runtapes ] ]
DESCRIPTION
Amverify reads an Amanda format tape and makes sure each backup image can be processed by amrestore and, if possible, the appropriate
restore program (e.g. tar).
Amverify runs amrestore on each file of the tape and pipes the output to a restore program (if available) with an option to create a cata-
logue of the backup. The catalogue itself is discarded. Only the success or failure of the operation itself is reported.
If the backup image cannot be processed by the restore program, e.g. if it was written on a different operating system, the image is sent
through dd to /dev/null. This still determines if the tape is readable, but does not do any internal consistency check on the image.
If config is set up to use a tape changer, the slot argument may be used to choose the first tape to process. Otherwise, the current slot
is used.
The runtapes configuration parameter determines how many tapes are processed unless it is specified on the command line.
See the amanda(8) man page for more details about Amanda.
AUTHOR
Axel Zinser <fifi@icem.de>
SEE ALSO amrestore(8), amanda(8), amverifyrun(8)AMVERIFY(8)