The code is correct it's a perldoc example. Make sure the $host variable is assigned correctly.
In windows, try this :Get into cmd
try using the default port
See if you can connect. And then login. If you fail, find out what port you should use. Some flavors of telnet require ports like 992 for example, not the default 23.
After it works manually, transfer that information into your code. The perldoc article shows how to set port and other options.
Is it possible to write a Perl script that will attempt to telnet to multiple servers and login to each one?
We have numerous servers and on occasion we are unable to connect. I'd like to be more proactive and have a script that runs every 30 minutes and attempts to login and then will send an... (2 Replies)
All
Please help, i will telnet to router to obain the ping status and compare, if higher than normal latency, i will have further action..
if i do the telent and in perl script then ....
e.g the result i obtain from the router will be =' Success rate is 100 percent (5/5), round-trip... (4 Replies)
Somewhat long story:
I have a simple Perl CGI script that uses Expect to Telnet to a device and grab some data, and then spits it back to Perl for display on the Webpage.
This works for many devices I've tried, but one device just fails, it keeps rejecting the password on this device, only... (1 Reply)
Here is my requirement to automate the deployment procedure for my project.
Telnet to AIX box (say SERVER1) from windows machine (with USER1)
Select the server to login say "SERVER2"
su as different user say "USER2"(Owner of the deployed files)
Execute the script (Script has so many... (1 Reply)
Iam trying to connect to a system through Telnet using net::Telnet Module
#!/usr/bin/perl -w
use net::Telnet
$myPassword = "abcdef";
$telnet = new Net::Telnet ( Timeout=>10,
Errmode=>'die');
$telnet->open (10.10.20.00);
$telnet->waitfor ('/USERCODE: $/i');
$telnet->print('abc');... (2 Replies)
Hello,
First of all, congratulations on this forum! Very mice material!
This is my fist thread and it has to do with connecting to an adsl modem and executing some commands.
Heres what I do:
$username = 'admin';
$passwd = 'admin';
$telnet = new Net::Telnet ( Timeout=>10,... (2 Replies)
Hi Experts,
I use perl telnet and ssh for normal tasks and health checks.
everything works fine but i would like to run scripts silently and print only data as i wish to.
by silent i mean.no banners /no prompts/ nothing.
I will format data before i print it on screen.
just formatted... (3 Replies)
Hi Experts,
I am using perl to telnet on cisco boxes. We have this stupid cisco node which does not support "terminal Length0" command.
Since I am using Net::Telnet and capturing output with
@output = $telnet->cmd('cmd');
Say
@output = $telnet->cmd('show version');
Now problem... (2 Replies)
Hi...
Iam running the following Perl Script for telnet and running the commands.The script is exited without any errors.But the telnet commands are not executed,Please help me to resolve my problem.
My telnet session
#telnet 9.121.61.2 2013
Trying 9.121.61.2...
Connected to... (1 Reply)
Hi all
i have little problem finding solution about simple telnet script .... i have 250 routers and on some i have different password and on some they ask just for password no username. So for example 1,2,3 have username and password (user,password) 4, and 5 have different username and password... (0 Replies)
Discussion started by: IvanMP
0 Replies
LEARN ABOUT DEBIAN
fence_drac
fence_drac(8) System Manager's Manual fence_drac(8)NAME
fence_drac - fencing agent for Dell Remote Access Card
SYNOPSIS
fence_drac [OPTION]...
DESCRIPTION
fence_drac is an I/O Fencing agent which can be used with the Dell Remote Access Card (DRAC). This card provides remote access to control-
ling power to a server. It logs into the DRAC through the telnet interface of the card. By default, the telnet interface is not enabled.
To enable the interface, you will need to use the racadm command in the racser-devel rpm available from Dell. To enable telnet on the
DRAC:
[root]# racadm config -g cfgSerial -o cfgSerialTelnetEnable 1
[root]# racadm racreset
fence_drac accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent.
fence_drac can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.dell.com
OPTIONS -a IPaddress
IP address or hostname of the switch.
-c cmd_prompt
Force fence_drac to use cmd_prompt as the command prompt
-d dracversion
Force fence_drac to treat the device as though it was for the specified drac version
-D dumpfile
Debug file of the telnet interaction
-h Print out a help message describing available options, then exit.
-l login
Login name.
-m modulename
The module name of the blade when using DRAC/MC firmware.
-o action
The action required. reboot (default), off, on or status.
-p password
Password for login.
-S path
Full path to an executable to generate the password for login.
-f seconds
Wait X seconds before fencing is started
-V Print out a version message, then exit.
STDIN PARAMETERS
action = < param >
The action required. reboot (default), off, on or status.
agent = < param >
This option is used by fence_node(8) and is ignored by fence_apc.
cmd_prompt = < param >
Force fence_drac to use cmd_prompt as the command prompt
drac_version = < param >
Force fence_drac to treat the device as though it was for the specified drac version.
debug = < dumpfile >
Debug file of the telnet interaction
ipaddr = < hostname | ip >
IP address or hostname of the switch.
login = < param >
Login name.
modulename = < param >
The module name of the blade when using DRAC/MC firmware.
passwd = < param >
Password for login.
passwd_script = < param >
Full path to an executable to generate the password for login.
delay = < param >
Wait X seconds before fencing is started
SEE ALSO
fence(8), fence_node(8)fence_drac(8)