Ok....attaching screenshots, so hopefully that works. I made sure to set auto-boot to false and reset first so it's a clean OBP. The first screen shot is of the requested probe-scsi-all. The second is devalias, in case that's of any use.
I *think* these are true Sun drives, by the IDs in the probe-scsi-all output, and I think those disk aliases are correct for those slots. There must be some crucial piece of knowledge that I am completely unaware of that bridges this gap.
Dear all,
Every hour i am receiving several data files to one folder for 24 hours each day.But some times some hours i do not have the files because of some problem.So i want to check the files inside the folder at the end of the day wether how many files i received in each hour like this.so i... (4 Replies)
I am having trouble understanding the difference between a passthrough device and a named device and when you would use one or the other to access equipment.
As an example, we have a tape library and giving the command
"camcontrol devlist" gives the following output:
akx# camcontrol... (1 Reply)
Hi
I've done migration of my SCO 5.0.6 from SCSI to IDE hard disk and now I'm getting in X windows this message:
CONFIG: No Stp SCSI devices configured (unit 0 missing)
Howto configure to get this message away? (4 Replies)
Hi, Here is the issue: There are 4 disks on this Sun x4150 system under Solaris 10, but only 1 disk can be seen by the OS. I've tried commands disks and devfsadm but not working. It's an important production server, so 'reboot -r' is not a choice.
# format < /dev/null
Searching for... (6 Replies)
Hello,
I attached a tape drive to one of my partitions but i cannot find the device.
I run the command lsdev|grep rmt but i dont get anything in return.
When i run lsslot -c slot i can see the slot number and the device that belongs to the tape drive but i cannot find any rmt files in /dev.... (6 Replies)
Hey everyone. First, let me start by saying I'm primarily focused on linux boxes, and just happened to get pulled into building two T5220's. I'm not super educated on sun boxes.
Both T5220's have 8 146GB 15k SAS drives. Inside the service processor, I can run SHOW /SYS/HDD{0-7} and they all come... (2 Replies)
Hello,
This is a programming question as well as a suse question, so let me know if you think I should post this in programming.
I have an application that I compiled under opensuse 12.2 using g77-3.3/g++3.3. The program compiles and runs just fine. I gave the application to a colleague who... (2 Replies)
Hi Guys,
Just a quick question hopefully someone will have seen this before and will be able to enlighten me.
I have been doing some Infrastructure Verification Testing and one of the tests was booting the primary domain from alternate disks, this all went well - however on restarting one of... (7 Replies)
In the below bash I am trying to ensure that all folders (represented by $folders) in a given directory are created. In the file f1 the trimmed folder will be there somewhere (will be multiple trimmed folders).
When that trimmed folder is found (represented by $S5) the the contents of $2 printed... (19 Replies)
Discussion started by: cmccabe
19 Replies
LEARN ABOUT OSF1
scsi
SCSI(7) Miscellaneous Information Manual SCSI(7)NAME
SCSI, RAID - Small Computer System Interface
SYNOPSIS
dsk#, tape#_d#, cdrom#
DESCRIPTION
The operating system interfaces to disk and tape devices through the Small Computer System Interface (SCSI). SCSI support is limited to
the Compaq-supplied storage devices and certain third-party devices. To determine which named devices are supported in the default system,
refer to the file /etc/ddr.dbase. For example, the following devices are listed therein: Winchester disks: RZ24L, RZ25, RZ25L, RZ25M,
RZ28M, RZ29B, RZ55, RZ56, RZ58, RZ73, RZ74, RX23, RX26, RX33, IOMEGA ZIP, RAID (Redundant Arrays of Independent Disks) SCSI controllers:
HSZ10, HSZ40, HSZ80 Magnetic tapes: TZ30, TZK11, TLZ06, TKZ09, TKZ60, DLT8000, SDT-10000 Media Changers: TL800, ESL9000 Optical disks:
RRD42, RRD43, RRD44
Vendors can add their own devices to ddr.dbase.
Refer to the Software Product Description (SPD) for a given release of the operating system for more information on processor-specific
device support.
Under the operating system, a SCSI device is referred to by a device identifier that is assigned by the operating system. This name has no
relationship to the descriptive name of the device, although in previous releases of the operating system disks such as the RZ74 mapped to
a system-assigned rz# logical name (where # was the instance number of that disk.
Current logical names for SCSI disks and tapes take the forms specified in the rz(8) and tz(7) reference pages, such as dsk? and tape?.
Refer to the dsfmgr(8) reference page for the naming conventions for disks, tapes and other devices, such as CD-ROM readers. Refer to the
hwmgr(8) reference page for information on determining device names and other device data.
SCSI Device Limits
The number of possible target device IDs is determined by the controller type and method of connection, such as a multibus connection using
fibre channel. Refer to the emx(7) reference page for an example of device addressing.
Device Special Files
The dsfmgr command creates device special files for all the devices that are attached to SCSI controllers. This event occurs automatically
on system startup, and no administrative intervention is required unless an event requires that a device be renamed or its I/O be reas-
signed. In such cases, you can use dsfmgr and hwmgr to manage SCSI devices and their associated device special files without the need to
calculate values from their Bus, Target ID, and LUN data.
RESTRICTIONS
The SCSI device driver is not warrantied to operate with optical disks other than the devices listed in /etc/ddr.dbase/. The SCSI driver
attempts to support, on a best-effort basis, disks and magnetic tapes supplied by other vendors.
The following notes apply to the driver's handling of disks from other vendors: These disks are identified using the following command: #
hwmgr -get attribute -a name This command will return the device name SCSI-WWID (World-Wide Identifier) for all devices on the system,
which includes the model name of the device. You can filter the output by specifying categories of devices. Disks are assigned a default
partition table. The default table can be modified by editing the ccmn_rzxx_sizes[8] entry in the /usr/sys/data/cam_data.c file. The
disklabel command can also be used to modify the partition table on an RZxx disk.
RELATED INFORMATION atapi_ide(7), dsfmgr(8), emx(7), hwmgr(8), rz(7), tz(7), disklabel(8), ddr.dbase(4) delim off
SCSI(7)