06-07-2013
Quote:
Originally Posted by
cbtshare
So basically what your saying is that I cannot create a partition and then assign that partition to a zpool?
That's not what I wrote. You certainly can create partitions and have zpools using then as underlying devices if you think that's the best solution for you.
Quote:
I know I can create filesystems in my zpool and assign SMB or NFS to it, but that is easy.
What's wrong with "easy" ??
Quote:
I want to create partitions and then assign respective partitions to different zpools, then create filesystems.
You can do that, although that would be suboptimal (less flexibility, less performance).
Quote:
Ok, well after some testing it seems like partitions cannot be used to create zpools, only disk.
This is incorrect.
You can create zpools from whole disks, primary and extended partitions, slices and plain files.
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hello!
I recently inherited system administration duties for a SUN v880 box. The system has 6 physical hard disks.. In doing some basic maintenance, I found they're configured for mirroring. I ran the metastat and metadb commands, and many of the mirrors are showing they are in need of... (5 Replies)
Discussion started by: ghuber
5 Replies
2. AIX
Hi, I have a AIX 4.3 box here with problems cause of a disk in below VG.
volume group: workvg
lspv
hdisk4 000166789869ab2d workvg
hdisk5 000166789869b96b workvg
now hdisk4 disk has failed and cause the quorum was set, workvg became varied off.
I have to replace the... (2 Replies)
Discussion started by: karthikosu
2 Replies
3. Solaris
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)
Discussion started by: deal732
3 Replies
4. UNIX for Advanced & Expert Users
hi guys,
I've got a strange issue, may be one of you has experienced this.
SunOS 5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Fire-V440
everything is mirrored.
My issue is that I have a umpty directory but seems to have data on. Let me show you
# df -h /data
Filesystem size used... (10 Replies)
Discussion started by: moustik
10 Replies
5. AIX
We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks.
OS--AIX 5.3 (3 Replies)
Discussion started by: ukatru
3 Replies
6. Solaris
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
Discussion started by: ramareddi16
1 Replies
7. Solaris
Hi all,
I guess most of you have seen this error message while installing Solaris 10 on an x86 platform. I got the error message while installing from DVD ISO on my home VMWare ESXi server.
It took me a long time to figure the exact issue and a subsequent solution. the solution is very... (1 Reply)
Discussion started by: admin_xor
1 Replies
8. Solaris
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /
... (0 Replies)
Discussion started by: fretagi
0 Replies
9. Solaris
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /... (4 Replies)
Discussion started by: fretagi
4 Replies
10. Solaris
Hello all,
Our Solaris 9? Sun Fire 480R backup server(in another city) is throwing disk errors such as these repeatedly.
WARNING: vxvm:vxio: Subdisk rootdisk-02 block 24037056: Uncorrectable read error
WARNING: vxvm:vxio: Subdisk rootdisk-02 block 7767072: Uncorrectable write error
... (18 Replies)
Discussion started by: RyanV
18 Replies
HD(4) Linux Programmer's Manual HD(4)
NAME
hd - MFM/IDE hard disk devices
DESCRIPTION
The hd* devices are block devices to access MFM/IDE hard disk drives in raw mode. The master drive on the primary IDE controller (major
device number 3) is hda; the slave drive is hdb. The master drive of the second controller (major device number 22) is hdc and the slave
hdd.
General IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the
partition on that physical drive. The first form, hdX, is used to address the whole drive. Partition numbers are assigned in the order
the partitions are discovered, and only non-empty, non-extended partitions get a number. However, partition numbers 1-4 are given to the
four partitions described in the MBR (the `primary' partitions), regardless of whether they are unused or extended. Thus, the first logi-
cal partition will be hdX5. Both DOS-type partitioning and BSD-disklabel partitioning are supported. You can have at most 63 partitions
on an IDE disk.
For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS `primary' partition on the
second one.
They are typically created by:
mknod -m 660 /dev/hda b 3 0
mknod -m 660 /dev/hda1 b 3 1
mknod -m 660 /dev/hda2 b 3 2
...
mknod -m 660 /dev/hda8 b 3 8
mknod -m 660 /dev/hdb b 3 64
mknod -m 660 /dev/hdb1 b 3 65
mknod -m 660 /dev/hdb2 b 3 66
...
mknod -m 660 /dev/hdb8 b 3 72
chown root:disk /dev/hd*
FILES
/dev/hd*
SEE ALSO
mknod(1), chown(1), mount(8), sd(4)
Linux 1992-12-17 HD(4)