Not getting desired output.
I'm executing the script as below.
---------------------------------
-------------------------------
I should get message like
$CM is down
e.g Output Post Processor is down
Last edited by Franklin52; 05-18-2013 at 10:03 AM..
Reason: Please use code tags
I need to write a shell script which checks the CPU utilization is above 90% for a particular process.
So far I have done this
prstat 0 1 | grep weblogic | awk '{print $9}'
This give an output like this
0.1%
0.0%
0.0%
0.0%
0.0%
Now I need to assign this to an array and check... (4 Replies)
I have to compare two files for any differences, then output the lab and question number for any differences. This is what I currently have:
diff lab2.txt lab2answer.txt > lab2compare.txt
Though the output doesn't have to be sent to a .txt (or any sort of log), I found that easier, at least... (2 Replies)
Hi,
i'd like to implmeent emergency shutdown script in case our AC dies and the temperature rises too high.
I can get core temperatures with:
sensors | grep Core | cut -c15-16
Result is:
23
18
18
13
21
18
15
17
How can I check if any of the cores is above eg. 80 (that's C of... (2 Replies)
Hi,
I have a question of comparing to files and output
the result third file where file1 is the mainfile containing processed dir data
and 2nd file grepīs dirīs data again (could be newer dirs comparing file1<file2)
now i wanna make shure that output in file3 only contains newer dirs
hx... (1 Reply)
Hi,
I have two files, file1 and file2 and I need to compare them by line (exact match, order of the lines is not important) and get output with lines from file2 that are not found in file1 (not other way around).
How do I do that? With grep or otherwise..
Thankyou (2 Replies)
I have two files '
1st one
ALIC-000352-B
ALIC-000916-O
DDS-STNGD
FDH-PPO1-001
PFG-30601-001
2nd one
'ALIC-000352-B'
'ALIC-000916-O'
'DDS-STNGD'
'FDH-PPO1-001' (4 Replies)
Hello folks,
I would like ask for a help in one script I'm currently working on.
Main goal is to compare size of file available on remote site and file already downloaded (check if downloaded file is complete and non corrupted).
# Check if files were downloaded correctly
for FILES in... (6 Replies)
Hi,
Please help How to compare two files-
Any mismatches 2nd and 3rd column's values corresponding to 1st column.
file1
15294024|Not Allowed|null
15291398|Not Allowed|null
15303292|Dropship (standard)|N
15303291|Dropship (standard)|N
15275561|Store Only|Y
15275560|Store Only|Y... (2 Replies)
Hi
Please help me to compare two files and output into a new file
file1.txt
15114933 |4001
15291649 |933502
15764675 |4316
15764678 |4316
15761974 |282501
15673104 |933505
15673577 |933505
15673098 |933505
15673096 |933505
15673092 |933505
15760705 ... (13 Replies)
Discussion started by: Ankita Talukdar
13 Replies
LEARN ABOUT DEBIAN
ppmtosixel
ppmtosixel(1) General Commands Manual ppmtosixel(1)NAME
ppmtosixel - convert a portable pixmap into DEC sixel format
SYNOPSIS
ppmtosixel [-raw] [-margin] [ppmfile]
DESCRIPTION
Reads a portable pixmap as input. Produces sixel commands (SIX) as output. The output is formatted for color printing, e.g. for a DEC
LJ250 color inkjet printer.
If RGB values from the PPM file do not have maxval=100, the RGB values are rescaled. A printer control header and a color assignment table
begin the SIX file. Image data is written in a compressed format by default. A printer control footer ends the image file.
OPTIONS -raw If specified, each pixel will be explicitly described in the image file. If -raw is not specified, output will default to com-
pressed format in which identical adjacent pixels are replaced by "repeat pixel" commands. A raw file is often an order of magni-
tude larger than a compressed file and prints much slower.
-margin
If -margin is not specified, the image will be start at the left margin (of the window, paper, or whatever). If -margin is speci-
fied, a 1.5 inch left margin will offset the image.
PRINTING
Generally, sixel files must reach the printer unfiltered. Use the lpr -x option or cat filename > /dev/tty0?.
BUGS
Upon rescaling, truncation of the least significant bits of RGB values may result in poor color conversion. If the original PPM maxval was
greater than 100, rescaling also reduces the image depth. While the actual RGB values from the ppm file are more or less retained, the
color palette of the LJ250 may not match the colors on your screen. This seems to be a printer limitation.
SEE ALSO ppm(5)AUTHOR
Copyright (C) 1991 by Rick Vinci.
26 April 1991 ppmtosixel(1)