Well, I am not even sure if its failing, cause at the other end I have a select call and it wakes up and reads the data I sent fine.
Ok here is the issue, I have a UDP socket(non blocking) through which I push some data to another port. At the other end I have select loop, waiting for this data.... (6 Replies)
Hi everybody,
I have an Unix box running Solaris and every day for 1 hour or 2 the box is stuck and I can only get this error message when trying to type a command :
bash-3.00$ vmstat 5
bash: fork: Resource temporarily unavailable
How can I trace what's is going wrong with this box ?... (5 Replies)
Hello. I have code which create processes with fork(). I set a limit for processes by typing ulimit -u 20. Then I run my code who should create 100 processes. Unfortunately, I have a mistake there and I forgot to quit all of my forked processes when fork gave me return value -1. So I am trapped in... (5 Replies)
installed 64bit 16GB VM on 64bit ESX server.
Written small C code to map the 2GB of memory by mmap after creating 3 child
and map getting failed by throwing "resource unavailable temporarily" after mapping 1.6 GB of memory out of 2GB. But same 1.5Gb memory mapping works fine.
I checked... (0 Replies)
Hi,
Now I am programming to communicate with some network printer through TCP Socket program.By sending command "\033E 1\r" to printer,causes, check the port for error normally.
In my case i used following code
bytesSent = send( sockfd, "\033E 1\r",sizeof("\033E 1\r"), 0);
... (1 Reply)
First post, sorry to be a bother but this one has been dogging me. I have a process user (java application server) that trips a resource limit every couple weeks and need help finding what limit we're hitting.
First, this is what's running:
This is the error when jobs are run or the... (0 Replies)
Solaris 10 Server refuse to connect :wall:
fork: Resource temporarily unavailable , server unexpectedly unavailable network connection , refuse error, disconnect message, fatal error type2, (protocol error type2)
Issue has been resolved after taken few steps :b:
First of all need to check... (1 Reply)
I wrote a script that works most of the time but gave me
fork: resource temporarily unavailable
some of the time. I restarted my computer and now it runs fine but googling "fork: resource temporarily unavailable" and looking on the forums has not actually helped me figure out what exactly I... (3 Replies)
Hello,
I am using the termios library to write data that I get from a Bluetooth device to a modem via serial.
The data arrive from the Bluetooth device correctly every 50ms and I have to bypass them on the serial ttyUSB3 where it is connected to a modem connected to a socket with static IP.
The... (10 Replies)
I wrote a perl program that simultaneously reads in data from 691 tar.gz files using zcat. I can run one instance of the program without any issues and the memory and swap sizes are negligible. However, when I attempt to run more than 1 I start to get fork: resource unavailable messages. Are... (6 Replies)
Discussion started by: aquinom85
6 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)