Visit The New, Modern Unix Linux Community

Linux and UNIX Man Pages

Test Your Knowledge in Computers #760
Difficulty: Easy
Most modern (fast) CPUs have multiple levels of CPU caches
True or False?
Linux & Unix Commands - Search Man Pages

xmode2(1) [debian man page]

MODE2(1)							   User Commands							  MODE2(1)

NAME
mode2, smode2, xmode2 - shows the pulse/space length of infrared signals SYNOPSIS
xmode2 [options] DESCRIPTION
The main purpose of these programs is to check operation of your home-brew LIRC receiver hardware and to see the IR waveform of the remote controller without an expensive oscilloscope. Very useful for debugging. Of course this program won't work with hardware that decodes the signals itself like e.g. TV cards or the Irman. xmode2 is based on smode2 by Sinkovics Zoltan. It is just a conversion from svga to X with some basic support for resizing. The only dif- ferences are that the --mode option enables an alternative display mode and that xmode2 can read and visualise mode2 output from stdin. -h --help display usage summary -v --version display version -d --device=device read from given device -H --driver=driver use given driver -g --geometry=geometry window geometry -t --timediv=value ms per unit -m --mode enable alternative display mode -r --raw access device directly SEE ALSO
mode2(1), smode2(1), xmode2(1) The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory. mode2 0.9.0-pre1 October 2010 MODE2(1)

Check Out this Related Man Page

IRSEND(1)							   User Commands							 IRSEND(1)

NAME
irsend - basic LIRC program to send infra-red commands SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...] DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such as TV boxes, HiFi sets, etc. DIRECTIVE can be: SEND_ONCE - send CODE [CODE ...] once SEND_START - start repeating CODE SEND_STOP - stop repeating CODE LIST - list configured remote items SET_TRANSMITTERS - set transmitters NUM [NUM ...] SIMULATE - simulate IR event REMOTE is the name of a remote, as described in the lircd configuration file. CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file. NUM is the transmitter number of the hardware device. For the LIST DIRECTIVE, REMOTE and/or CODE can be empty: LIST "" "" - list all configured remote names LIST REMOTE "" - list all codes of REMOTE LIST REMOTE CODE - list only CODE of REMOTE The SIMULATE command only works if it has been explicitly enabled in lircd. -h --help display usage summary -v --version display version -d --device use given lircd socket [/var/run/lirc/lircd] -a --address=host[:port] connect to lircd at this address -# --count=n send command n times EXAMPLES
irsend LIST DenonTuner "" irsend SEND_ONCE DenonTuner PROG-SCAN irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3 irsend SEND_STOP OnkyoAmpli VOL-DOWN irsend SET_TRANSMITTERS 1 irsend SET_TRANSMITTERS 1 3 4 irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S" FILES
/etc/lirc/lircd.conf Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave- form details. DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics: "irsend: could not connect to socket" "irsend: Connection refused" (or "Permission denied"). SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory. lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org. irsend 0.9.0-pre1 October 2010 IRSEND(1)

Featured Tech Videos