Hi guys,
Couldn't find the solution of this problem. Please Help!
I have a file-
Input_File
TC200232 92 30
TC215306 2 74
TC210135 42 14
I want an output file in which if column2>column3, the values are swapped and an additional column with value Rev_Com is... (4 Replies)
I'm racking my brain on this one! :(
I have a list like this:
Paul 20
Paul 25
Paul 30
Frank 10
Julie 15
Julie 13
etc, etc...
I've been trying to figure out a way to have the output display the name in the first column ONCE and add the numbers in the second column and display that... (2 Replies)
So I have this input
1 10327 rs112750067 T C . PASS DP=65;AF=0.208;CB=BC,NCBI
1 10469 rs117577454 C G . PASS DP=2055;AF=0.020;CB=UM,BC,NCBI
1 10492 rs55998931 C T . PASS DP=231;AF=0.167;CB=BC,NCBI
1 10583 rs58108140 G A ... (3 Replies)
Hi All,
I have following html code
<TR><TD>9</TD><TD>AR_TVR_TBS </TD><TD>85000</TD><TD>39938</TD><TD>54212</TD><TD>46</TD></TR>
<TR><TD>10</TD><TD>ASCV_SMY_TBS </TD><TD>69880</TD><TD>33316</TD><TD>45698</TD><TD>47</TD></TR>
<TR><TD>11</TD><TD>ARC_TBS ... (9 Replies)
I have some files that look as follows. I need to add a character 'C' in the fifth column if that column is blank. I prefer in-place editing.
1 1 B M 0 0 203 0, 0.0 0, 0.0 0, 0.0 0, 0.0 0.000 360.0 360.0 360.0 141.9 15.4 28.8 66.1
2 2 B A ... (21 Replies)
Hi,
I want to write a script which will add the entries in all columns for the same column id. I can do it in excel, but I need to do this for 384 columns which will come down to 96 (384/4). How can I do this iteratively
A A A A B B B B C C C C
1 0 1 0 2 1 4 5 3 4 5 6
2 0 0 2 3 5 70 100 1... (7 Replies)
HI Guys,
I have below input.
Output Base on Below Condition.
1> if forth column is empty and next coming line have same name with \es then add that column name on all rows
2>rest of all are es:vsDataEUtranCellFDD
Input:-
CCL01736 CCL01736_7A_1 es:vsDataEUtranCellFDD ... (3 Replies)
Hi All,
I have a file with only one column of data (without delimiter). For Ex:
cat temp.txt
22055
21088
93840
30990
50990
50950
I want to insert an additional column with current date as value. So, i have used below command but didn't get the result as excepted. Could onyone over... (5 Replies)
SCC(4) BSD Kernel Interfaces Manual SCC(4)NAME
scc -- Zilog 8530 Serial Communications Controller interface
SYNOPSIS
scc* at ioasic? offset ?
DESCRIPTION
The scc driver provides support for the Zilog 8530 Serial Communications Controller (SCC) via the IOASIC found on DECstation 5000 models in
the /100, /20, and /240 series (supported by NetBSD/pmax).
Each SCC device has two serial ports. The DECstation 5000 model 20 provides one SCC device. Other models provide two, but one port of each
device is dedicated to mouse and keyboard input, respectively.
Input and output for each line may set to one of following baud rates: 50, 75, 110, 134.5, 150, 300, 600, 1200, 1800, 2400, 4800, 9600,
19200, 38400, or 57600.
Speeds up to 230400 are supported by the chip and the motherboard, but speeds higher than 57600 do not work reliably without an external
clock signal.
FILES
/dev/ttya
/dev/ttyb
/dev/ttyc
/dev/ttyd
The mapping from units to serial-hardware outlets is idiosyncratic. The even ports are wired serial connectors and the odd-numbered ports
are reserved for mouse and keyboard.
On machines with one port like Personal DECstations, the single device is ttya.
On the 5000/1xx and 5000/2xx, the first serial port (default serial console) is ttyc and the second port is ttya.
SEE ALSO intro(4), ioasic(4), ttys(5), MAKEDEV(8)HISTORY
The scc driver first appeared in 4.4BSD.
The scc driver was also used for the IOASIC SCC found in DEC Alpha model 3000 TurboCHANNEL based systems; NetBSD/alpha has since been con-
verted to use the machine-independent zstty(4).
BUGS
The IOASIC provides internal DMA channels that can be programmed to transfer up to 4096 bytes of data into, or out, of an SCC without further
software intervention. This feature of the IOASIC is not yet supported.
The mapping from device-special files (major and minor number) to chip and port is arguably backwards. ULTRIX tries to hide the hardware
mapping, but NetBSD does not. Users wanting to use ULTRIX compatible tty names /dev/tty0 and /dev/tty1 for the scc comm-port lines should
make links or device-special files which match their hardware setup.
BSD April 24, 2003 BSD