SMP(4)							   BSD Kernel Interfaces Manual 						    SMP(4)

NAME

     SMP -- description of the FreeBSD Symmetric Multi-Processor kernel

SYNOPSIS

     options SMP

DESCRIPTION

     The SMP kernel implements symmetric multi-processor support.

COMPATIBILITY

     Support for multi-processor systems is present for all Tier-1 architectures on FreeBSD.  Currently, this includes amd64, i386 and sparc64.
     Support is enabled using options SMP.  It is permissible to use the SMP kernel configuration on non-SMP equipped motherboards.

I386 NOTES
     For i386 systems, the SMP kernel supports motherboards that follow the Intel MP specification, version 1.4.  In addition to options SMP, i386
     also requires device apic.  The mptable(1) command may be used to view the status of multi-processor support.

     The number of CPUs detected by the system is available in the read-only sysctl variable hw.ncpu.

     FreeBSD allows specific CPUs on a multi-processor system to be disabled.  This can be done using the hint.lapic.X.disabled tunable, where X
     is the APIC ID of a CPU.  Setting this tunable to 1 will result in the corresponding CPU being disabled.

     The sched_ule(4) scheduler implements CPU topology detection and adjusts the scheduling algorithms to make better use of modern multi-core
     CPUs.  The sysctl variable kern.sched.topology_spec reflects the detected CPU hardware in a parsable XML format.  The top level XML tag is
     <groups>, which encloses one or more <group> tags containing data about individual CPU groups.  A CPU group contains CPUs that are detected
     to be "close" together, usually by being cores in a single multi-core processor.  Attributes available in a <group> tag are "level", corre-
     sponding to the nesting level of the CPU group and "cache-level", corresponding to the level of CPU caches shared by the CPUs in the group.
     The <group> tag contains the <cpu> and <flags> tags.  The <cpu> tag describes CPUs in the group.  Its attributes are "count", corresponding
     to the number of CPUs in the group and "mask", corresponding to the integer binary mask in which each bit position set to 1 signifies a CPU
     belonging to the group.  The contents (CDATA) of the <cpu> tag is the comma-delimited list of CPU indexes (derived from the "mask"
     attribute).  The <flags> tag contains special tags (if any) describing the relation of the CPUs in the group.  The possible flags are cur-
     rently "HTT" and "SMT", corresponding to the various implementations of hardware multithreading.  An example topology_spec output for a sys-
     tem consisting of two quad-core processors is:

     <groups>
       <group level="1" cache-level="0">
	 <cpu count="8" mask="0xff">0, 1, 2, 3, 4, 5, 6, 7</cpu>
	 <flags></flags>
	 <children>
	   <group level="2" cache-level="0">
	     <cpu count="4" mask="0xf">0, 1, 2, 3</cpu>
	     <flags></flags>
	   </group>
	   <group level="2" cache-level="0">
	     <cpu count="4" mask="0xf0">4, 5, 6, 7</cpu>
	     <flags></flags>
	   </group>
	 </children>
       </group>
     </groups>

     This information is used internally by the kernel to schedule related tasks on CPUs that are closely grouped together.

     FreeBSD supports hyperthreading on Intel CPU's on the i386 and AMD64 platforms.  Because using logical CPUs can cause performance penalties
     under certain loads, the logical CPUs can be disabled by setting the machdep.hyperthreading_allowed tunable to zero.

SEE ALSO

     cpuset(1), mptable(1), sched_4bsd(4), sched_ule(4), loader(8), sysctl(8), condvar(9), msleep(9), mtx_pool(9), mutex(9), rwlock(9), sema(9),
     sx(9)

HISTORY

     The SMP kernel's early history is not (properly) recorded.  It was developed in a separate CVS branch until April 26, 1997, at which point it
     was merged into 3.0-current.  By this date 3.0-current had already been merged with Lite2 kernel code.

     FreeBSD 5.0 introduced support for a host of new synchronization primitives, and a move towards fine-grained kernel locking rather than
     reliance on a Giant kernel lock.  The SMPng Project relied heavily on the support of BSDi, who provided reference source code from the fine-
     grained SMP implementation found in BSD/OS.

     FreeBSD 5.0 also introduced support for SMP on the sparc64 architecture.

AUTHORS

     Steve Passe <fsmp@FreeBSD.org>

BSD
								    May 7, 2008 							       BSD