Hi Guys,
I wish to compare two ebcdic files.
diff utility manual says it only compares two text files line by line.. I doubt this will be good for ebcdic files.
cmp utility does binary comparision but I do not find any thing in manual referring if it does support ebcdic file format.
let... (2 Replies)
Can you please help me with writing script for following purpose.
I have to divide single large web access log file into multiple log files based on dates inside the log file.
For example:
if data is logged in the access file for jan-10-08 , jan-11-08 , Jan-12-08
then make small log file... (1 Reply)
Hi all,
I have three files, one is a navigation file, one is a depth file and one is a file containing the measured field of gravity. The formats of the files are;
navigation file:
2006 320 17 39 0 0 *nav 21.31542 -157.887
2006 320 17 39 10 0 *nav 21.31542 -157.887
2006 320 17 39 20 0... (2 Replies)
I need a script (perl or awk..anything is fine) to join 3 files based on three key columns. The no of non-key columns can vary in each file. The columns are delimited by semicolon.
For example,
File1
Dim1;Dim2;Dim3;Fact1;Fact2;Fact3;Fact4;Fact5
---- data delimited by semicolon ---
... (1 Reply)
Hey everyone.
I am trying to figure out a way to create a file that will be renamed based off of one of multiple files. For example, if I have 3 files (cat.ctl, dog.ctl, and bird.ctl) that gets placed on to an ftp site I want to create a single file called new.cat.ctl, new.dog.ctl, etc for each... (3 Replies)
Dear Gurus,
I am a novice in shell scripts. I have a requirement where I need to move files every day from Current Folder to Archive folder.
Daily I will be receiving 5 files in the folder - /opt/data/feeds/.
The feeds folder has two sub-folders - Current and Archive.
For example the... (25 Replies)
Hi,
I have a file abc.dat. It contains the fileds of empid, empname, empcity. each city contains 10 records. i want to create the city file and pass the same city records into the file. I don't know the city names.
In unix using awk command how can we do?
abc.dat:
1 john delhi
2... (2 Replies)
I want to search for a particular file name patterns and move them to a specific folder, is it possible to do it with awk or sed? (1 Reply)
Discussion started by: rudoraj
1 Replies
LEARN ABOUT DEBIAN
srec_emon52
srec_emon52(5) File Formats Manual srec_emon52(5)NAME
srec_emon52 - Elektor Monitor (EMON52) file format
DESCRIPTION
This format is used by the monitor EMON52, developed by the European electronics magazine Elektor (Elektuur in Holland). Elektor wouldn't
be Elektor if they didn't try to reinvent the wheel. It's a mystery why they didn't use an existing format for the project. Only the
Elektor Assembler will produce this file format, reducing the choice of development tools dramatically.
Records
All data lines are called records, and each record contains the following four fields:
+---+------+---+-----------+------+
|cc | aaaa | : | dd ... dd | ssss |
The field are defined as follows: +---+------+---+-----------+------+
cc The byte count. A two digit hex value (1 byte), counting the actual data bytes in the record. The byte count is separated from
the next field by a space.
aaaa The address field. A four hex digit (2 byte) number representing the first address to be used by this record.
: The address field and the data field are separated by a colon.
dd The actual data of this record. There can be 1 to 255 data bytes per record (see cc) All bytes in the record are separated from
each other (and the checksum) by a space.
ssss Data Checksum, adding all bytes of the data line together, forming a 16 bit checksum. Covers only all the data bytes of this
record.
Please note that there is no End Of File record defined.
Byte Count
The byte count cc counts the actual data bytes in the current record. Usually records have 16 data bytes. I don't know what the maximum
number of data bytes is. It depends on the size of the data buffer in the EMON52.
Address Field
This is the address where the first data byte of the record should be stored. After storing that data byte, the address is incremented by
1 to point to the address for the next data byte of the record. And so on, until all data bytes are stored.
The address is represented by a 4 digit hex number (2 bytes), with the MSD first.
Data Field
The payload of the record is formed by the Data field. The number of data bytes expected is given by the Byte Count field.
Checksum
The checksum is a 16 bit result from adding all data bytes of the record together.
Size Multiplier
In general, binary data will expand in sized by approximately 3.8 times when represented with this format.
EXAMPLE
Here is an example of an EMON52 file:
10 0000:57 6F 77 21 20 44 69 64 20 79 6F 75 20 72 65 61 0564
10 0010:6C 6C 79 20 67 6F 20 74 68 72 6F 75 67 68 20 61 05E9
10 0020:6C 6C 20 74 68 69 73 20 74 72 6F 75 62 6C 65 20 05ED
10 0030:74 6F 20 72 65 61 64 20 74 68 69 73 20 73 74 72 05F0
04 0040:69 6E 67 21 015F
SEE ALSO
http://sbprojects.fol.nl/knowledge/fileformats/emon52.htm
AUTHOR
This man page was taken from the above Web page. It was written by San Bergmans <sanmail@bigfoot.com>
Reference Manual SRecord srec_emon52(5)