Sponsored Content
Operating Systems Solaris SAS drive USB caddy on Solaris V440 Post 302756695 by psychocandy on Wednesday 16th of January 2013 10:57:22 AM
Old 01-16-2013
SAS drive USB caddy on Solaris V440

Got a T2000 which has got the 2.5" SAS drives. Want to be able, if I can, to connect to USB caddy and connect to a V440.

Anyone ever tried this? To be honest, having problems even finding a SAS-USB caddy.
 

10 More Discussions You Might Find Interesting

1. SCO

mounting USB floppy drive /Flash drive in OSR 6.0

Can anybody help me out to mount USB flash /floppy drive in sco openserver 6.0 . (5 Replies)
Discussion started by: sureshdrajan
5 Replies

2. Solaris

Solaris box V440 got stucked

Hi Friends, My solaris box V440 got stucked. I couldn't accessit from the remote console. Finally i restarted the box. Can you tell me what are the ways we can find out the issues and what are the logs we can check other than /var/log/messages. Thanks Jinu (1 Reply)
Discussion started by: Jinu
1 Replies

3. Solaris

Installing Solaris x86 through an external DVD drive through the USB port...

Is there a way to install Solaris 10 x86 with an external DVD drive that connects through the USB port? I would think I would run GRUB off of a floppy disk and somehow use that to make it look to the USB port to boot from but I don't know how to do that. Can anyone help me out? (1 Reply)
Discussion started by: Bradj47
1 Replies

4. Solaris

USB External Hard Drive for Solaris 10 Sparc

Hi- I would like to know if anyone has used any USB External Hard Drive, about 500/750GB or 1TB, with any of the Solaris 10 "SPARC" systems. Not on intel nor amd platform. I'm looking for the compatible drive and found a few listed on Sun solaris ready page, but I'd like to have inputs from... (3 Replies)
Discussion started by: agfa_109
3 Replies

5. Solaris

USB Drive for Solaris

I have a T2000 server running solaris 10, it has 4 USB ports. I want to extend the storage capacity by attaching an external USB drive and mounting it as an other mount point. How do I do that, the following link gives information about USB in Solaris OS, ... (1 Reply)
Discussion started by: Tirmazi
1 Replies

6. Solaris

Solaris Network Interface and USB Drive issues

Hi I had installed Sun Solaris 10 on my dell vostro 1400.Problem is iam unable to mount the usb drives as there was no detections at all.And also iam unable to find my network interface or iam not able to install the network card. If try to type ifconfig -a It is showing only loop back... (4 Replies)
Discussion started by: testerindia25
4 Replies

7. Solaris

Boot issues Solaris 10 + V440

Hello, I've a very weird problem with one of the machines. When I try to boot off a working DVD that I used to install another system with it spits out the following message: Sun Fire V440, No Keyboard Copyright 2007 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.22.33, 8192 MB... (14 Replies)
Discussion started by: stoci
14 Replies

8. Solaris

Sun v440 Drive in Slot 1 not listed but its active

I have a Sun SunFire v440 server with a hard drive in each slow. When I run "iostat -En", "format", and "cfgadm -al", 3 of the drives show up, but the one in Slot 1( which should be c1t1d0 ) is nowhere to be found. However, when I go to the rack its in an watch the activity lights, it seems... (2 Replies)
Discussion started by: the.gooch
2 Replies

9. Solaris

Installing Solaris 10 x86 from USB flash drive

Dear friends, I have the DVD image of solaris 10 but I don't have DVD writer to burn it onto a dvd R. I was wondering if I could install Solaris from my 4gb usb flash drive as my PC supports booting from usb. I have installed Windows 7 this way recently, I have no idea about Solaris. Could you... (2 Replies)
Discussion started by: gabam
2 Replies

10. Solaris

Solaris V440 keeps crashing

Hi, I have Sun Solaris V440, every two days or so, the system crashes and it's at OK prompt. After that I do the FSCK and clear all the bad sectors. Then system stays up for close to 48 hours. Then it crashes again. I checked the logs and I don't see anything under /var/adm/messages file. ... (1 Reply)
Discussion started by: samnyc
1 Replies
MFI(4)							   BSD Kernel Interfaces Manual 						    MFI(4)

NAME
mfi -- LSI Logic & Dell MegaRAID SAS RAID controller SYNOPSIS
mfi* at pci? dev ? function ? DESCRIPTION
The mfi driver provides support for the MegaRAID SAS family of RAID controllers, including: - Dell PERC 5/e, PERC 5/i, PERC 6/e, PERC 6/i - Intel RAID Controller SRCSAS18E, SRCSAS144E - LSI Logic MegaRAID SAS 8208ELP, MegaRAID SAS 8208XLP, MegaRAID SAS 8300XLP, MegaRAID SAS 8308ELP, MegaRAID SAS 8344ELP, MegaRAID SAS 8408E, MegaRAID SAS 8480E, MegaRAID SAS 8708ELP, MegaRAID SAS 8888ELP, MegaRAID SAS 8880EM2, MegaRAID SAS 9260-8i - IBM ServeRAID M1015, ServeRAID M5014 These controllers support RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50 and RAID 60 using either SAS or SATA II drives. Although the controllers are actual RAID controllers, the driver makes them look just like SCSI controllers. All RAID configuration is done through the controllers' BIOSes. mfi supports monitoring of the logical disks in the controller through the bioctl(8) and envstat(8) commands. EVENTS
The mfi driver is able to send events to powerd(8) if a logical drive in the controller is not online. The state-changed event will be sent to the /etc/powerd/scripts/sensor_drive script when such condition happens. SEE ALSO
intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8) HISTORY
The mfi driver first appeared in NetBSD 4.0. BSD
March 22, 2012 BSD
All times are GMT -4. The time now is 02:17 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy