I have Sun Ultra 5/10 UltraSPARC-IIi 440 Mhz ) OpenBoot 3.19 with 1024 MB and IDE disk
I have the following error shown in the attached photos and video kindly advise
Hi,
I am planning to purchase a sun ultra 10 or 30, i was wondering what is the difference between them. I tried looking up for sun documentation and cannot find any info. Please help me. Thanks
Soul (1 Reply)
Not necessarily a Solaris question, but thought this the best place for it.
My main Linux/OpenBSD workstation (really old athlon) is on its way out, and I am considering getting an Ultra 30 or 60 to replace it with. If I go with a dual proc 60 I'll get SMP support on Linux. Most systems I've... (1 Reply)
I need to move everything from an older ultra 1 onto a newer ultra 60 (OS and all) running SUNOS 5.5.1. Any suggestions on the best way to do this?
Frank
P.S. If you know of a document somewhere please let me know. (11 Replies)
Hi,
I would like to upgrade the memory to 8GB and two more cpu's is it possbile to upgrade?
Currently I have...
# uname -a
SunOS bdsn4003 5.8 Generic_117350-33 sun4u sparc SUNW,Ultra-60
# prtconf
System Configuration: Sun Microsystems sun4u
Memory size: 2048 Megabytes
System... (1 Reply)
Has anyone successfully tried installing Solaris 10 on an Ultra 4??
The machine in question has a 300MHz SPARCIIi CPU and 1 GB of RAM which - according to the SUN doco should be enough. However when I try and install it just hangs on the "configuring Devices" message. I left it overnight to see... (2 Replies)
Dear All,
I Have problem at my console Ultra 24 Intel. OS : solaris 10 with kernel 13xxxx. Error message is :
May 11 13:27:08 unknown agent: syslog
May 11 13:27:08 agent agentServer parameter (xxxxx) is not a valid local hostname
May 11 13:27:08 unknown agent: syslog
May... (8 Replies)
Hi all,
I must install 2.6 and 2.5.1 on ultra 80's. I need Operating Environment Installation CD p/n 704-6914-10 (Sept 99) or
704-7076-10 (Feb 2000)and also the manual "Installing Solaris 2.5.1 or Solaris 2.6 Software on 419+ MHz Systems"
will be really helpfull.
I can not reach that CD... (0 Replies)
I have a nice Ultra 10 (440 MHz, 1 GB RAM, 40 GB Disk, Elite3D m6 Graphics), which probably needs a new install. Currently it is running Solaris 10 with Java Desktop. Imho Java Desktop slows the computer a little bit down. Since a few days a have also a SunPCi II card.
Now I want to reinstall... (3 Replies)
Hi,
as being discussed in this Thread some time ago, I need the "Solaris Operating Environment Installation CD" to be able to install Solaris releases before 7 on my lovely U80. Part number is 704-7076-10.
Does anyone still have this hanging around?
Regards,
Oli
... (5 Replies)
Discussion started by: oreissig
5 Replies
LEARN ABOUT NETBSD
stpcide
STPCIDE(4) BSD Kernel Interfaces Manual STPCIDE(4)NAME
stpcide -- STMicroelectronics STPC IDE disk controllers driver
SYNOPSIS
stpcide* at pci? dev ? function ? flags 0x0000
DESCRIPTION
The stpcide driver supports the STMicroelectronics STPC x86 SoC internal IDE controllers, and provides the interface with the hardware for
the ata(4) driver. The driver features DMA mode 2 and PIO mode 4 transfer speeds.
The 0x0002 flag forces the stpcide driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debug-
ging aid, or to work around problems where the IDE controller is wired up to the system incorrectly.
SEE ALSO ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)BUGS
The timings used for the DMA and PIO modes are for STPC Atlas and its siblings with their PCI clock configured at 33 MHz. Other speeds
including the STPC Vega Ultra-IDE controller will need adjustments.
BSD October 31, 2003 BSD