Hello everybody,
:confused:
I have to change the system disk on an old PC running SCO 5.0.5.
The disk is up and running, this is a preventive action.
My experience on UNIX is very limited and I look for the easyest solution to clone this unit.
Is it possible with commands or through a clone... (2 Replies)
I am using ufsdump and ufsrestore to clone the root disk on one of my servers. I would like to automate this as much as possible, but have run into a problem where it prompts for changing the owner/mode when it is complete.
Any ideas for running this in the background and not being prompted?
... (4 Replies)
Hello guys!
I use the Solaris 10 x86 machine.
I need to clone the boot disk.
Why, when I copy slice 1 - there is a following:
# ufsdump 0f - /dev/rdsk/c0d0s1 | (cd /mnt && ufsrestore rf - )
DUMP: Warning - super-block on device `/dev/rdsk/c0d01` is corrupt - run fsck
Dump: The Entire... (6 Replies)
Hi,
I'm running Ubuntu on my laptop. To keep my data safe and easy disaster recovery as well I bought similar HDD to one installed in my laptop with higher capacity and using USB box I'm doing disk clone to it. So at any time I can replace disk and carry on with my work as before.
I'm trying... (2 Replies)
Hello Friends,
Am in requirement to clone a Live HP-UX server here's details
OS: HpUX B-11.11 with mirrored LVM disks .
S/ws: Remedy, XML engine, Annoysystem, Oracle
All Oracle, XMl and Remedy data is on SAM LUN which is used for clustering .
My requirement to create a clone server and... (10 Replies)
Dear All
I needed to clone my disk to another hard drive . I did it as the following :
#dd if=/dev/sdb of=/dev/sdc
But after a while, the procedure ended with the "writing to /dev/sdc
input/output error" message.
Can you please let me know how can I overcome this as the fdisk now returns as "... (1 Reply)
Discussion started by: hadimotamedi
1 Replies
LEARN ABOUT PLAN9
wren
WREN(3) Library Functions Manual WREN(3)NAME
wren, ata - hard disk interface
SYNOPSIS
bind #H[drive] /dev
bind #w[target[.lun]] /dev
/dev/hd0disk
/dev/hd0partition
/dev/sd0disk
/dev/sd0partition
...
DESCRIPTION
The hard disk interfaces (wren, #w, is a SCSI disk; ata, #H, is an IDE or ATA disk) serve a one-level directory giving access to the hard
disk partitions. The parameter to attach defines the numerical SCSI target and logical unit number or the IDE drive number to access.
Both default to zero.
Each partition name is prefixed by hd and the numeric drive identifier. The partition always exists and covers the entire disk. The size
of each partition as reported by stat(2) is the number of bytes in the partition, so the size of is the size of the entire disk.
The partition also always exists; it is the last block on the disk for SCSI, second to last for IDE. If it contains valid partition data,
those partitions will be visible as well. Every time the device is bound, the partitions are updated to reflect any changes in the parti-
tion file.
The format of the partition file is the string
plan9 partitions
on a line, followed by partition specifications, one per line, consisting of a name and textual strings for the block start and limit for
each partition on the disk.
The program prep(8) writes the partition table for the disk; its use is preferred to writing it by hand.
SEE ALSO prep(8), scsi(3)SOURCE
/sys/src/9/port/devwren.c
/sys/src/9/pc/devata.c
WREN(3)