Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Little script with minicom
Top Forums Shell Programming and Scripting Little script with minicom Post 302626959 by enaud on Friday 20th of April 2012 03:41:11 AM
Old 04-20-2012
Ok.. I have this error with your script
Code:
root@ubuntu:~/Desktop/SCRIPTMODEM# sh modem2.sh
stty: /dev/ttyUSB3: unable to perform all requested operations
abort on (NO CARRIER)
abort on (ERROR)
send (AT+CREG?^M)
expect (OK)
^M
+CREG: 0,1^M
^M
OK

-- got it

Code:
send (AT!PADSETUP=1,2,82.91.28.127,0,9940,0,1^M)
expect (OK)
^M
^M
OK

-- got it

Code:
send (AT+CGDCONT=1,"IP","web.omnitel.it"^M)
expect (OK)
^M
^M
OK

-- got it

Code:
send (AT!PADCONN=1^M)
expect (CONNECT)
^M
^M
OK^M
^M
CONNECT

-- got it

Code:
send ()
error setup modem

but i need a script like this
fore example:

Code:
IF not exist /dev/ttyUSB3 echo "MODEM NOT CONNECTED" and exit
ELSE (exist /dev/ttyUSB3) {
AT+CREG?
if ouput is different from +creg: 0,1 then echo "MODEM NOT REGISTRED" and redo at+creg
AT!PADCONN=1
if output is different from CONNECTED 1,0 then "IMPOSSIBLE OPEN A SOCKET" and redo at!PADCONN=1
}

how i can do?

PLS THANKS
Last edited by methyl; 04-20-2012 at 12:19 PM.. Reason: please be bothered to use code tags
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

linux - minicom

hello. i'm attempting to use minicom in linux, but i'm having some difficulties. When i type in "minicom", the application opens up. It says 'starting minicom/finding modem'(something like that). However, once it actually starts, I can't do anything. No matter what I type in, it doesn't work. ... (2 Replies)
Discussion started by: kickboxer
2 Replies

2. UNIX for Dummies Questions & Answers

Minicom Scripting

Does anyone have a working minicom script they would care to post as I can't get the scripting working and the scriptdemo and unixlogin sample scripts are on my system either. Thanx, I (2 Replies)
Discussion started by: ianf
2 Replies

3. Shell Programming and Scripting

running scripts in minicom

Hi, I am new to use minicom. I want script to run on minicom with username and password as automated.(Expect). please could anyone suggest the sample code for it. Thanks in advance (2 Replies)
Discussion started by: vanid
2 Replies

4. Shell Programming and Scripting

expect minicom

Hi, I am new to using minicom. I want how to write a expect script for minicom login? I wrote a code but its not acting what iam expecting. here I have my code: #!/usr/bin/expect set fd fconfigure $fd spawn -open $fd spawn minicom expect “enter:” send "\n" send "\n" ... (3 Replies)
Discussion started by: vanid
3 Replies

5. Shell Programming and Scripting

minicom works, but stty does not

Hi all, I have some trouble getting stty to talk to some serial/usb converter. Getting minicom to work was however quite simple after I entered the following settings in addition to its standard-setup: pu port /dev/ttyUSB0 pu baudrate 19200 pu bits 8 pu... (3 Replies)
Discussion started by: pa-trick
3 Replies

6. Shell Programming and Scripting

Exiting from Minicom on a shell script

This is what I've tried: #!/bin/sh send sh send showifs send exit ! killall minicom My problem is that for some reason when I do this it doesn't give me the results of the prior commands sent like showifs So I suspect my syntax is wrong. (1 Reply)
Discussion started by: uradunce
1 Replies

7. Shell Programming and Scripting

Help with minicom script

I'm a fairly new user to Linux based systems and am still a little uncomfortable with using the command interface. I'm trying to get my feet wet but have unfortunately hit a wall and am actually not even sure what I am trying to accomplish is at all possible. Basically, I am trying to use a... (0 Replies)
Discussion started by: nrdk00
0 Replies

8. Shell Programming and Scripting

Expect script not working in crontab with minicom

Hi All, I am testing expect script in command prompt without issue, but in crontab it is not working, i check the output error as below: #cat /var/log/testexp.log spawn minicom -C /var/log/minicom1.log No cursor motion capability (cm) AT+COPS=? I am new in scripting, together... (1 Reply)
Discussion started by: elingtey
1 Replies

9. SCO

Minicom

hello is there a copy of minicom or equivalent for unixware 7? thanks (3 Replies)
Discussion started by: deus-programmer
3 Replies

10. UNIX for Dummies Questions & Answers

Alternatives to minicom During Remote Access?

Hey All, I am trying to find something similar to minicom, but it needs the ability to be ran during a remote dialup session on the remote device's side. If I dial into the remote server (*using minicom) and then try to run minicom on the remote server I get the following: # minicom... (20 Replies)
Discussion started by: mrm5102
20 Replies

LEARN ABOUT SUSE

irsend

IRSEND(1)								FSF								 IRSEND(1)

NAME

       irsend - basic LIRC program to send infra-red commands

SYNOPSIS

       irsend [options] DIRECTIVE REMOTE CODE [CODE...]

DESCRIPTION

       Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
       as TV boxes, HiFi sets, etc.

       DIRECTIVE can be:
	  SEND_ONCE	    - send CODE [CODE ...] once
	  SEND_START	    - start repeating CODE
	  SEND_STOP	    - stop repeating CODE
	  LIST		    - list configured remote items
	  SET_TRANSMITTERS  - set transmitters NUM [NUM ...]
	  SIMULATE	    - simulate IR event

       REMOTE is the name of a remote, as described in the lircd configuration file.

       CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.

       NUM is the transmitter number of the hardware device.

       For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:

	  LIST	 ""    ""   - list all configured remote names
	  LIST REMOTE  ""   - list all codes of REMOTE
	  LIST REMOTE CODE  - list only CODE of REMOTE

       The SIMULATE command only works if it has been explicitly enabled in lircd.

       -h --help
	      display usage summary

       -v --version
	      display version

       -d --device
	      use given lircd socket [/var/run/lirc/lircd]

       -a --address=host[:port]
	      connect to lircd at this address

       -# --count=n
	      send command n times

EXAMPLES

	  irsend LIST DenonTuner ""
	  irsend SEND_ONCE  DenonTuner PROG-SCAN
	  irsend SEND_ONCE  OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
	  irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
	  irsend SEND_STOP  OnkyoAmpli VOL-DOWN
	  irsend SET_TRANSMITTERS 1
	  irsend SET_TRANSMITTERS 1 3 4
	  irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"

FILES

       /etc/lirc/lircd.conf
	      Default lircd configuration file.  It should contain all the remotes, their infra-red codes and the corresponding timing	and  wave-
	      form details.

DIAGNOSTICS

       If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
       "irsend: could not connect to socket"
       "irsend: Connection refused" (or "Permission denied").

SEE ALSO

       The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.

       lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.

irsend 0.8.7pre1						     May 2010								 IRSEND(1)
All times are GMT -4. The time now is 07:47 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy