04-11-2012
I think that there may be a problem with the change of arcitechture. It's been a while since I had a Sun, but only the files required for the hardware are installed from the original media.
I'm assuming that you have done the inital boot from CD and then used ufsrestore and directed it to the appropriate disk slice. If you have a DR contract in place where you go offsite to recover your server, they may be able to guide you around this problem as they likely face it frequently. It may be possible to overlay the restored files with the appropriate ones from the CD, however you will need to be certain that they are from the same version, of course. I can't remember the directory structure to look at for this though.
I hope that this gives you a few pointers.
Robin
Liverpool/Blackburn
UK
9 More Discussions You Might Find Interesting
1. Programming
I'm trying to use the "mknod" call in C to create a clone of /dev/null. I am stumped as to the final parameter I should provide to "mknod()". I am supposed to give it a type dev_t, which specifies a major & minor number. I want to specify major 3, minor 1, but how can I do this?
dev_t seems to... (2 Replies)
Discussion started by: nathan
2 Replies
2. Filesystems, Disks and Memory
Disk cloning
I had an external SCSI master disk that I used to clone to an identical external SCSI disk because the other SCSI disk would become corrupted. My original Master became corrupted so I used one of the other to good disk to copy back to the master. Unfortunately the new master needs... (1 Reply)
Discussion started by: stamperr
1 Replies
3. Solaris
I have a Sun T5120, and I want to programmatically determine how much RAM it has.
# uname -a
SunOS myhost 5.10 Generic_141444-09 sun4v sparc SUNW,SPARC-Enterprise-T5120
The box has 64Gb; I tried prtdiag and prtconf, but they give me bogus info
prtconf gives me:
# prtconf |grep -i... (12 Replies)
Discussion started by: thomn8r
12 Replies
4. Solaris
Trying to clone an old V240 (sun4u) onto a new T2000 (sun4v).
Managed to create a flar on the V240. Worked out that you need to add the sun4v architecture to the flar (-U "content_architecture=sun4u,sun4v" in the flarcreate).
Anyway, copied that to spare 2nd disk on my target T2000. Booted... (2 Replies)
Discussion started by: psychocandy
2 Replies
5. Solaris
have been trying to create a 2 GB ramdisk (virtual) to run on my T-2000 simulator (Legion) which has sun4v architecture. I have a SPARC workstation which runs on sun4u architecture with Solaris 10.
I have created a ramdisk image using dd command, newfs, then used ufsrestore to restore the... (3 Replies)
Discussion started by: Zam_1234
3 Replies
6. Solaris
Hi!
I am quite new to Solaris and come from AIX world.
I need to clone running production LDOM. In AIX you just take mksysb and restore it to new LPAR. It will install with blank network settings.
How to do it in Solaris 11? Can't find document to clone from running system.. they talk only... (6 Replies)
Discussion started by: padapada
6 Replies
7. Solaris
Hi everyone,
We have the below sun Operating system, Now our storage team have Create a 500GB LUN for this server, How can i scan and mount the shared LUN ? Could anyone help me to resolve this issue.
SunOS my_hostname.com 5.10 Generic_150400-09 sun4v sparc sun4v
Update:
--------
I... (9 Replies)
Discussion started by: babinlonston
9 Replies
8. Solaris
Hi experts,
This is a production server.
Host information's are below
SunOS hostname_srv 5.10 Generic_150400-09 sun4v sparc sun4v
Now issue with ntp service, This host have zone in it with 9 hosts, Every hosts have ntp service issue. While i check for the service status it's in... (3 Replies)
Discussion started by: babinlonston
3 Replies
9. Red Hat
Hi
I have the following difficulty:
the NetApp admin has clone one file system from one red hatserver and presented this cloned LUN into another redhat server.
I can see the LUN as:
fdisk -l
Disk /dev/sda: 64.4 GB, 64424509440 bytes
255 heads, 63 sectors/track, 7832 cylinders
Units =... (1 Reply)
Discussion started by: fretagi
1 Replies
LEARN ABOUT DEBIAN
installgrub
installgrub(1M) installgrub(1M)
NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)