Sun V240 Raid Question Post: 302590582

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Help: Sun Disk partitioning for Sun V240 & StorEdge 3300

Dear Sun gurus, I have Sun Fire V240 server with its StorEdge 3300 disk-array. Following are its disks appeared in format command. I have prepared its partitions thru format and metainit & metattach (may be i have made wrong steps, causing the errors below because I have done thru some document...

2. UNIX for Dummies Questions & Answers

Sun - RAID

From what I have been finding on the net is that most all Sun RAID setups are software? Is it really that uncommon for Sun servers to have hardware RAID?

3. Solaris

BIOS Serial Number on Sun Fire V240

Hi, I want to know if there is a command available for obtaining the BIOS Serial Number on a Sun Fire V240 machine? Or is it a known issue that it cannot be obtained through any command? Thanks, Vineet

4. Solaris

sun v240 performance

Hi, we are having one sun v240 server, now this server is performing very slow, checked using top, iostat and vmstat commands, output is looking normal, but the performance is very slow and generating more traffic in network, how can we resolve this. Regards RJS

5. Solaris

Sun T5120 hardware RAID question

Hi everyone I've just purchased a Sun T5120 server with 2 internal disks. I've configured hardware RAID (mirror) and as a result the device tree in Solaris only contains 1 hard drive. My question is, how would I know when one of the drives become faulty? Thanks

6. Solaris

Sun X-series - Raid/Volumes

Hi, Does anyone know of another tool/software to view the underlying disk config (raid volume) in the BIOS from the Solaris OS ? Tried raidctl but does not show info.. Thanks in advance, Gary... ---------- Post updated at 11:48 AM ---------- Previous update was at 11:14 AM ---------- ...

7. Solaris

Alom Sun V240

hallo anybody know how to set alom mail alerty server with yahoomail ? thank u?where i can find mail server address for yahoomail?thank

8. Hardware

Sun T3-1 hardware RAID

Hi all I've just received my T3-1. It has 8 disks and I would like to configure RAID1 on the disks. The Sun documentation states that you can either use the OpenBoot PROMP utility called Fcode or you can use software via the Solaris OS. The documentation doesn't make it clear if: 1. The...

9. Solaris

Sun Fire V240 server Fan replacement

I have a sun fire v240 server. The output of prtdiag -v shows a failed fan. There are 3 fans for cooling system board. There is 1 fan for each of the powersupply (There are 2 powersupplies) From the below output how do i know which fan is bad and whats its location...

10. Solaris

Question on selling/unloading Sunfire V240

Over 6 years ago I picked up a Sunfire V240 from my employer who was unloading all of their Sun hardware. Two processors, 4GB RAM and half dozen SCSI disk drives. It doesn't have an OS or a CD Rom/DVD drive. I have a collection of SCSI drives that should work with the server. So if I can get...

LEARN ABOUT NETBSD

ataraid

ATARAID(4)						   BSD Kernel Interfaces Manual 						ATARAID(4)

NAME

     ataraid -- software BIOS RAID

SYNOPSIS

     pseudo-device ataraid
     ld* at ataraid? vendtype ? unit ?

DESCRIPTION

     The ataraid driver provides support for BIOS-based software RAID controllers.  These are devices which have some simple support for several
     basic RAID levels (often RAID 0 and RAID 1), but which require software support to actually perform the RAID function.  The BIOS support is
     largely just to create and recognize the array so that it may be a boot device.

     The driver currently supports RAID formats from:
	   o   Adaptec HostRAID (found in Intel 6300ESB)
	   o   Intel MatrixRAID
	   o   JMicron RAID
	   o   nVidia MediaShield
	   o   Promise FastTrak
	   o   Via V-RAID (found in many VIA-based motherboards)

     Status of the logical disk as well as the disks associated with it, can be viewed through the bioctl(8) utility.

SEE ALSO

     ld(4), bioctl(8)

HISTORY

     The ataraid driver first appeared in NetBSD 2.0.

AUTHORS

     The ataraid driver was originally adapted from FreeBSD by Jason Thorpe <thorpej@NetBSD.org>.

BUGS

     Not all features of the software RAID are currently recognized or supported.  For example, the Adaptec support doesn't recognize when a RAID
     1 should be in a ``building'' state, and it does not do the right thing.

     At least part of the reason for this is that the publically-available information on these formats is quite limited.

BSD
								September 16, 2008							       BSD