Sponsored Content
Operating Systems Solaris Changed disk controller -> drops into GRUB?! Post 302566134 by kebabbert on Wednesday 19th of October 2011 03:45:17 PM
Old 10-19-2011
Changed disk controller -> drops into GRUB?!

I changed disk controller. Unplugged every disk, inserted another controller card, an IBM M1015. The disks are recognized in BIOS, and the controller card's BIOS shows up. But after that, I drop into GRUB and a prompt. That is all.

How shall I solve this problem? I am thinking of booting from Solaris 11 Express USB (have no CD reader) and do an import and export. Other than, I am lost. What should I do? Help?

---------- Post updated at 11:45 AM ---------- Previous update was at 10:32 AM ----------

It seems this is a well known problem with Gigabyte motherboards and IBM M1015. No solution. Just change mobo. Smilie
 

9 More Discussions You Might Find Interesting

1. Solaris

Controller target disk?

Hi, I am a newbie to Solaris. I want to know how to find out the controller target and disk number on a SunFire V890 box that has 6X72GB disks. The probe-scsi output is as shown below: /pci@8,600000/SUNW,qlc@2 LiD HA LUN --- Port WWN --- ----- Disk description ----- 0 0 0 ... (1 Reply)
Discussion started by: sudhir_shet
1 Replies

2. SCO

Warning HD: no root disk controller was found

hi... i hav a problem to install sco unix while installing sco unix 5.0.5 in acer altos with hardware raid am getting error "Warning HD: no root disk controller was found system error 5: while getting fs type flushing controller: DAC960PRL cache done." i hav use the following... (18 Replies)
Discussion started by: mselvaprakash
18 Replies

3. HP-UX

[Joy Share] - Replace an unknown status controller on HP FC60 disk array

Replace an unknown status controller on HP FC60 disk array Author:JoyOnline JoyChangLu@gmail.com Trouble description: The users detected that the status of controller at A is unknown. Analysis and diagnostic: Physical observed all leds on enclosure of disk array is normal. The... (4 Replies)
Discussion started by: JoyOnLine
4 Replies

4. SCO

SCO 5.0.7 no root disk controller found error during install

I'm "attempting" to install SCO 5.0.7 on an HP ML370 G4 server and am ready to bash the keyboard with head now. I keep getting the error message "WARNING hd: no root disk controller found" when running the bootable install cd. I have a raid 5 array with an online spare created using 4 36.3 GB... (2 Replies)
Discussion started by: FrictionBurn
2 Replies

5. Solaris

Help needed to find out the disk controller for veritas disks

hi all i am using vxvm 5.1 on my sun blade 150 which is running with solaris 5.10. When i give the command "vxdisk list" it gives the following output # vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 auto:none - - online... (2 Replies)
Discussion started by: kingston
2 Replies

6. SCO

Change Disk controller in SCO 6.0.0

So today I tried to upgrade a customer from a Proliant with an HPSAS controller to an Intel server with a MEGASAS controller. First, I downloaded the megasas driver from SCO and installed it on the old system. Then I created a new Microlite Edge emergency boot cd with the new driver on it. I... (2 Replies)
Discussion started by: jgt
2 Replies

7. Solaris

Changed to AHCI, can not access disk???

Here is my problem: I have an 1.5TB disk with OpenSolaris (b134, b151a) using non AHCI. I then changed to AHCI in BIOS, which results in severe problems: I can not boot the system. I suspect the problem is because I changed to AHCI. Now I have changed back to non AHCI, but still I can not... (0 Replies)
Discussion started by: kebabbert
0 Replies

8. Solaris

Disk controller reassignment

Hi The scenario in the oracle t4-1 hardware with solaris 10 is as follows: 1. The initial install on the server was performed with an incorrect disk layout. 2. New disks were ordered and slot into the server. 3. The disks are allocated a controller and a disk number based on the disk or... (13 Replies)
Discussion started by: kerrygold
13 Replies

9. Linux

Grub not loading from replaced disk

Hi, a little while ago, one of the GPT Partitioned hard disk had gone faulty in a Mirror RAID and is now successfully replaced. here is how I did that. 1) created identical partition table on the new disk. 2) attached the mirrors using md commands. The whole procedure is given below:... (2 Replies)
Discussion started by: busyboy
2 Replies
rsm_get_controller(3RSM)			      Remote Shared Memory Library Functions				  rsm_get_controller(3RSM)

NAME
rsm_get_controller, rsm_get_controller_attr, rsm_release_controller - get or release a controller handle SYNOPSIS
cc [ flag... ] file... -lrsm [ library... ] #include <rsmapi.h> int rsm_get_controller(char *name, rsmapi_controller_handle_t *controller); int rsm_get_controller_attr(rsmapi_controller_handle_t chdl, rsmapi_controller_attr_t *attr); int rsm_release_controller(rsmapi_controller_handle_t chdl); DESCRIPTION
The controller functions provide mechanisms for obtaining access to a controller, determining the characteristics of the controller, and releasing the controller. The rsm_get_controller() function acquires a controller handle through the controller argument. The name argument is the specific con- troller instance (for example, "sci0" or "loopback"). This controller handle is used for subsequent RSMAPI calls. The rsm_get_controller_attr() function obtains a controller's attributes through the attr argument. The chdl argument is the controller handle obtained by the rsm_get_controller() call. The attribute structure is defined in the <rsmapi> header. The rsm_release_controller() function releases the resources associated with the controller identified by the controller handle chdl, obtained by calling rsm_get_controller(). Each rsm_release_controller() call must have a corresponding rsm_get_controller() call. It is illegal to access a controller or segments exported or imported using a released controller. RETURN VALUES
Upon successful completion, these functions return 0. Otherwise, an error value is returned to indicate the error. ERRORS
The rsm_get_controller(), rsm_get_controller_attr(), and rsm_release_controller() functions can return the following errors: RSMERR_BAD_CTLR_HNDL Invalid controller handle. The rsm_get_controller() and rsm_get_controller_attr() functions can return the following errors: RSMERR_BAD_ADDR Bad address. The rsm_get_controller() function can return the following errors: RSMERR_CTLR_NOT_PRESENT Controller not present. RSMERR_INSUFFICIENT_MEM Insufficient memory. RSMERR_BAD_LIBRARY_VERSION Invalid library version. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ |MT-Level |MT-Safe | +-----------------------------+-----------------------------+ SEE ALSO
rsm_memseg_export_create(3RSM), rsm_memseg_import_connect(3RSM), attributes(5) SunOS 5.10 8 Jun 2001 rsm_get_controller(3RSM)
All times are GMT -4. The time now is 03:03 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy