Hi
I have a linux box attched to a SAN storage from EMC with RAID 5 .I understand that it has 3g cache howver a 20gb file creation takes too much time here are my results any ideas why
time dd if=/dev/zero of=disk.img bs=1048576 count=20000
20000+0 records in
20000+0 records out
997.59s... (2 Replies)
Hi all,
I have a server running in RH ES4, the SCSI HD are running in RAID 1.
I backup the LVM config by using 'vgcfgbackup' and then remove all the HD.
I insert another HD (same size & branch but different model) into the machine and run linux rescue to recreate the... (0 Replies)
Hi,
I have a script which greps for a word in a file contains records.
I grabbed a particular column & sent the colomn values to a file.
I need to find each column value, the times it appeared in the file.
My script is:
grep sceneority <file> | cut -f 6 >> swi
With... (4 Replies)
Hi, I'm having a problem when attempting to define the OCR location for my 10g RAC setup on Solaris 10. I get the following error:
The specified shared raw partition /dev/did/rdsk/d1s0 may not have the correct permission. Verify that the partition is owned by Oracle user.
As per the Oracle10g... (15 Replies)
Good morning to one and all :-) Thank god its Friday, as its bee na rubbish week for me !
So, a quick question. Disks ! Ive got a few local disks, and a few SAN disks used on my solaris server. Whats confusing me, and Im not sure if there's an issue at the SAN end, or my end, regarding the... (3 Replies)
Hi
I have a log that look like this:
12:20:28.522 Connection from IP: 185.164.118.136 Login Failed!
12:20:29.389 Connection from IP: 84.20.182.63 Login Failed!
12:20:30.111 Connection from IP: 80.180.143.79 Login Failed!
12:20:31.038 Connection from IP: 83.226.102.106 Login Failed!... (1 Reply)
I'm facing a strange problem, please help me out.
Here we go.
I want to count number of fields in particular file.
filename and delimiter character will be passed through parameter.
On command prompt if i type following i get 27 as output (which is correct)
cat customer.dat | head -1 | awk... (12 Replies)
Hi,
The scenario is like this:
1.We needed to assign two hdisks to an LPAR
2.SAN team gives us two ldevs
3.One of our VIO is hanging on cfgmgr operation
4. We ran cfgmgr on the smooth VIO. Got the disks and assigned the disks from there to the LPAR.(By passed the other VIO as in didnt run... (11 Replies)
Hello,
I am using solaris 10 x86. my root and backup slices is having same memory 10 GB and same cylinders numbers . My root and backup cylinders ends at same cylinder number 1031. so for creating a new slice i am giving starting cylinder from 1302 and this is giving me error as "out of range" .... (2 Replies)
Hi,
I have a log file which amongst other text has these lines:
(id is always the same format - )
e.g.
<username>user1</username>
<name>fdfsdf</name>
Multiple other tags
<id>A111</id>
<username>user2</username>
<name>fdfsdf</name>
Multiple other tags
<id>A222</id>... (1 Reply)
Discussion started by: arsenalfan01
1 Replies
LEARN ABOUT SUNOS
uniq
uniq(1) User Commands uniq(1)NAME
uniq - report or filter out repeated lines in a file
SYNOPSIS
uniq [-c | -d | -u] [-f fields] [-s char] [ input_file [output_file]]
uniq [-c | -d | -u] [-n] [ + m] [ input_file [output_file]]
DESCRIPTION
The uniq utility will read an input file comparing adjacent lines, and write one copy of each input line on the output. The second and suc-
ceeding copies of repeated adjacent input lines will not be written.
Repeated lines in the input will not be detected if they are not adjacent.
OPTIONS
The following options are supported:
-c Precedes each output line with a count of the number of times the line occurred in the input.
-d Suppresses the writing of lines that are not repeated in the input.
-f fields Ignores the first fields fields on each input line when doing comparisons, where fields is a positive decimal integer. A
field is the maximal string matched by the basic regular expression:
[[:blank:]]*[^[:blank:]]*
If fields specifies more fields than appear on an input line, a null string will be used for comparison.
-s chars Ignores the first chars characters when doing comparisons, where chars is a positive decimal integer. If specified in con-
junction with the -f option, the first chars characters after the first fields fields will be ignored. If chars specifies
more characters than remain on an input line, a null string will be used for comparison.
-u Suppresses the writing of lines that are repeated in the input.
-n Equivalent to -f fields with fields set to n.
+m Equivalent to -s chars with chars set to m.
OPERANDS
The following operands are supported:
input_file A path name of the input file. If input_file is not specified, or if the input_file is -, the standard input will be used.
output_file A path name of the output file. If output_file is not specified, the standard output will be used. The results are unspeci-
fied if the file named by output_file is the file named by input_file.
EXAMPLES
Example 1: Using the uniq command
The following example lists the contents of the uniq.test file and outputs a copy of the repeated lines.
example% cat uniq.test
This is a test.
This is a test.
TEST.
Computer.
TEST.
TEST.
Software.
example% uniq -d uniq.test
This is a test.
TEST.
example%
The next example outputs just those lines that are not repeated in the uniq.test file.
example% uniq -u uniq.test
TEST.
Computer.
Software.
example%
The last example outputs a report with each line preceded by a count of the number of times each line occurred in the file:
example% uniq -c uniq.test
2 This is a test.
1 TEST.
1 Computer.
2 TEST.
1 Software.
example%
ENVIRONMENT VARIABLES
See environ(5) for descriptions of the following environment variables that affect the execution of uniq: LANG, LC_ALL, LC_CTYPE, LC_MES-
SAGES, and NLSPATH.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWesu |
+-----------------------------+-----------------------------+
|CSI |Enabled |
+-----------------------------+-----------------------------+
|Interface Stability |Standard |
+-----------------------------+-----------------------------+
SEE ALSO comm(1), pack(1), pcat(1), sort(1), uncompress(1), attributes(5), environ(5), standards(5)SunOS 5.10 20 Dec 1996 uniq(1)