hacmp - is it possible to remove a disk heartbeat network from an online cluster? Post: 302553675

10 More Discussions You Might Find Interesting

1. Programming

checking the heartbeat of the online user

hello, Can anyone please tell me how can i check the availability of the online user in a client-server environtment. This is for a program where lakhs of client are connected to the server and the server has to check the availability of the every client in every minute. So polling every client...

2. AIX

Heartbeat network down

Hello. I have a cluster with two heartbeat networks. Both are on separate VG. Some one varyoned those Vg's on one node. After that heartbeat network went down on both nodes. I varyoffed those two Vg's networks came back up but cluster is still in UNSTABLE status and in hacmp.out...

3. AIX

HACMP 5.4.1 Two-Node-Cluster-Configuration-Assistant fails

This post just as a follow-up for thread https://www.unix.com/aix/115548-hacmp-5-4-aix-5300-10-not-working.html: there was a bug in the clcomdES that would cause the Two-Node-Cluster-Configuration-Assistant to fail even with a correct TCP/IP adapter setup. That affected HACMP 5.4.1 in combinatin...

4. AIX

MQ upgrade(ver.6to7) in a HACMP cluster

Hi What is the procedure to upgrade the MQ from 6 to 7 in aix hacmp cluster. Do i need to bring down the cluster services running in both the nodes and then give #smitty installp in both the nodes separately. Please assist...

5. AIX

Should GPFS be configured before/after configuring HACMP for 2 node Cluster?

Hi, I have a IBM Power series machine that has 2 VIOs and hosting 20 LPARS. I have two LPARs on which GPFS is configured (4-5 disks) Now these two LPARs need to be configured for HACMP (PowerHA) as well. What is recommended? Is it possible that HACMP can be done on this config or do i...

6. UNIX for Dummies Questions & Answers

Heartbeat network IP range in Clustering

I am trying to do the two node clustering with serviceguard package in redhat 5 and I am following this link http ://pbraun.nethence.com/doc/sysutils/mcsg.html Here They are mentioning 10.1.1 for network use and 10.1.2 and 10.1.3 for HeartBeat use, I have a doubt, How to make a heartbeat...

7. AIX

Remove the disk online

Hi I have one of the disk missing in my NIMVG. My doubt is can I remove this hdisk2 online ? few of the file systems seems to be spread over 7 PV's. that's why i'm worried. Can someone suggest if I can replace this disk online. Also how to check if there is some data present in hdisk2 alone...

8. AIX

[Howto] Update AIX in HACMP cluster-nodes

As i have updated a lot of HACMP-nodes lately the question arises how to do it with minimal downtime. Of course it is easily possible to have a downtime and do the version update during this. In the best of worlds you always get the downtime you need - unfortunately we have yet to find this best of...

9. AIX

Re-cluster 2 HACMP 5.2 nodes

Hi, A customer I'm supporting once upon a time broke their 2 cluster node database servers so they could use the 2nd standby node for something else. Now sometime later they want to bring the 2nd node back into the cluster for resilance. Problem is there are now 3 VG's that have been set-up...

10. AIX

Clstat not working in a HACMP 7.1.3 cluster

I have troubles making clstat work. All the "usual suspects" have been covered but still no luck. The topology is a two-node active/passive with only one network-interface (it is a test-setup). The application running is SAP with DB/2 as database. We do not use SmartAssists or other gadgets. ...

LEARN ABOUT CENTOS

mkqdisk

mkqdisk(8)						      Quorum Disk Management							mkqdisk(8)

NAME

       mkqdisk - Cluster Quorum Disk Utility

WARNING

       Use of this command can cause the cluster to malfunction.

SYNOPSIS

       mkqdisk [-?|-h] | [-L] | [-f label] [-c device  -l label] [-d [-d ...]]

DESCRIPTION

       The mkqdisk command is used to create a new quorum disk or display existing quorum disks accessible from a given cluster node.

OPTIONS

       -c device -l label
	      Initialize  a new cluster quorum disk.  This will destroy all data on the given device.  If a cluster is currently using that device
	      as a quorum disk, the entire cluster will malfunction.  Do not run this on an active cluster  when  qdiskd  is  running.	 Only  one
	      device  on  the  SAN should ever have the given label; using multiple different devices is currently not supported (it is expected a
	      RAID array is used for quorum disk redundancy).  The label can be any textual string up to 127 characters - and is therefore  enough
	      space to hold a UUID created with uuidgen(1).

       -f label
	      Find the cluster quorum disk with the given label and display information about it.

       -L     Display information on all accessible cluster quorum disks.

       -d     Increase debugging level.  Specify multiple times for more information.  Currently, specifying more than twice has no effect.

SEE ALSO

       qdisk(5), qdiskd(8), uuidgen(1)

								     July 2006								mkqdisk(8)