ping with source address Post: 302540668

10 More Discussions You Might Find Interesting

1. IP Networking

set the source IP address to zero

Hi, does anybody know how to set the IP source address of an IP packet to be zero? The problem is that when you create a raw socket and set the IP_HDRINCL socket option, if you put the ip_src address to zero (INADDR_ANY) the kernel will automatically set the source address to the primary IP address...

2. IP Networking

source address woes

I have checkpoint firewall-1 running on a solaris 7 sparc box with two physical working networks interface cards hme0, qfe0, (please note these are false addresses) qfe0 = 195.111.222.178 internet ISP hme0 = 172.19.12.58 /24 internal Lan which has a router to france on it I want to...

3. UNIX for Dummies Questions & Answers

Ping file with ip address

Hi, If have a file with 93 ip address that i want to ping in first place (later i want to use this file for snmp output of those ip addresses). First i want to do is to ping all those ip addresses. I know i can put for every ip address "ping" with the vi. But i want the keep this file...

4. IP Networking

Selecting interface based on source and destination ip address

Hi all, I have some doubts in selecting the interface to transfer packets and receive the packets. --> Multiple interfaces : -------------------- 1) 0.0.0.0 --------> wild card address. 2) x.x.x.x --------> valid address.(192.168.1.156) 3) ff.ff.ff.ff -------->...

5. IP Networking

iproute2 loopback source address

Hi, I'm trying to set up a test bed where I can use a single machine to do some network packet captures between 2 different applications without needing a network connection. I'm actually trying to do some SIP VoIP development, but for illustration purposes will use ping. I want: ping 127.0.0.1...

6. Shell Programming and Scripting

PING to get ip address

I want to print the domain:ip for a list of domains in a text file. the problem is godaddy has blocked the domains so the result of a ping is like this: PING domain.com (68.178.232.99): 56 data bytes --- domain.com ping statistics --- 1 packets transmitted, 0 packets received, 100.0%...

7. IP Networking

Ping domain indicates the external ip address and not the local ip

when i execute from local machine ping domainname i get the external ip address but i am on local dns and i expect the local ip address.. using nslookup : no problem so i cannot find why... thanks

8. IP Networking

Source IP address field in RREP on DSR routing

Hello I have a question about routing in MANET using Dynamic Source Routing protocol. IN RFC4728 (DSR) in section "IP fields" of RREP (Route Reply) packet we have this: ok. I read in several books and also in rfc4728 that: when a source node (node that initiate route discovery process)...

9. Programming

Ping test sends mail when ping fails

help with bash script! im am working on this script to make sure my server will stay online, so i made this script.. HOSTS="192.168.138.155" COUNT=4 pingtest(){ for myhost in "$@" do ping -c "$COUNT" "$myhost" &&return 1 done return 0 } if pingtest $HOSTS #100% failed...

10. UNIX for Beginners Questions & Answers

Ping certain range of ip address

hey guys, In my program i am giving an initial ip & end ip. i just want to check every ip in that range is pingable or not echo "Enter the initial ip:" read inip echo "Enter the end ip:" read endip for (( i=0; i<=$endip; i++ )) do if ping -c 4 $inip then echo "pingable" else echo...

LEARN ABOUT DEBIAN

rds-ping

RDS-PING(1)						    BSD General Commands Manual 					       RDS-PING(1)

NAME

     rds-ping -- test reachability of remote node over RDS

SYNOPSIS

     rds-ping [-c count] [-i interval] [-I local_addr] remote_addr

DESCRIPTION

     rds-ping is used to test whether a remote node is reachable over RDS.  Its interface is designed to operate pretty much the standard ping(8)
     utility, even though the way it works is pretty different.

     rds-ping opens several RDS sockets and sends packets to port 0 on the indicated host. This is a special port number to which no socket is
     bound; instead, the kernel processes incoming packets and responds to them.

OPTIONS

     The following options are available for use on the command line:

     -c count
	     Causes rds-ping to exit after sending (and receiving) the specified number of packets.

     -I address
	     By default, rds-ping will pick the local source address for the RDS socket based on routing information for the destination address
	     (i.e. if packets to the given destination would be routed through interface ib0, then it will use the IP address of ib0 as source
	     address).	Using the -I option, you can override this choice.

     -i timeout
	     By default, rds-ping will wait for one second between sending packets. Use this option to specified a different interval. The timeout
	     value is given in seconds, and can be a floating point number. Optionally, append msec or usec to specify a timeout in milliseconds
	     or microseconds, respectively.
     Specifying a timeout considerably smaller than the packet round-trip time will produce unexpected results.

AUTHORS

     rds-ping was written by Olaf Kirch <olaf.kirch@oracle.com>.

SEE ALSO

     rds(7), rds-info(1), rds-stress(1).

BSD
								   Apr 22, 2008 							       BSD

10 More Discussions You Might Find Interesting

1. IP Networking

set the source IP address to zero

Discussion started by: developer

2. IP Networking

source address woes

Discussion started by: hcclnoodles

3. UNIX for Dummies Questions & Answers

Ping file with ip address

Discussion started by: Rensen

4. IP Networking

Selecting interface based on source and destination ip address

Discussion started by: vijaypdp2006