How can I check how much space is left in the solaris file system? and how can I increase those space in the file system?. I am trying to install Oracle Database on Solaris 8.But, it keep giving me error message says that"There is not enough space on the volume you have specified".
Thanks
... (1 Reply)
Hi all,
My disk space is 100% full.
df -k <dir> -> 100%
One of my debug files consume huge amount of space and i want to remove the same to start off fresh debugs.
However i'm unable to remove the file giving out the following error message:
rm -f debug.out22621
rm: cannot remove... (8 Replies)
How to get free disk space size in C/C++ program( Solaris system)?
Is there any standard function or system function? Just like "df" or
"getdfree" in Linux. (4 Replies)
Hi,
Has anyone ever encountered the following scenario:
I am working on a SUN server with solaris 10 installed and veritas managing the filesystem. One of the file systems has become full:
df -kh /ossrc/dbdumps
Filesystem size used avail capacity Mounted on... (6 Replies)
Hi All,
I have installed Solaris 10 on my AMD 64 3000+ system. I was playing with grub commands eeprom and bootadm commands. I screwed my boot-file and now am unable to boot the system. Gets error msg as "panic: cannot open /kernel/amd64/unix". I booted the system is filesafe and tried update the... (2 Replies)
F7FA22C9 I O SYSJ2 UNABLE TO ALLOCATE SPACE IN FILE SYSTEM
edit by bakunin: until you are willing to phrase a decent question i am unwilling to tolerate such a spammed thread here.
- Thread closed - (0 Replies)
Hi Experts,
I have query regarding output of df command.
$ df -k
Filesystem 1024-blocks Used Available Capacity Mounted on
rpool/ROOT/solaris-161 191987712 6004395 140577816 5% /
/devices 0 0 0 0% /devices... (3 Replies)
A file system has reached 100%. I have tried adding space using chfs -a size=+100 command to that file system. However, the % used is not decreasing from 100%. Is there a way to add more space?
Also, can someone suggest a script to send a mail alert when a file system is reaching 90%.
G (4 Replies)
Hi
I have the following cenario:
I have requested a LUN from the NetApp to create a file system, and the netapp admin provide me with one as you can see below, but after following all the steps, I could not create a file system on the device:
# format
Searching for disks...done
... (11 Replies)
Hi,
I have inherited this AIX 5.3 host. I'm unable to increase the /usr file system. It gives me this error.
What needs to be done to remove this error?
vios:/home/padmin$ chfs -a size=+128M /usr
0516-304 lquerypv: Unable to find device id 0002ef4df616f9690000000000000000 in the Device
... (14 Replies)
Discussion started by: dn888
14 Replies
LEARN ABOUT HPUX
cmdisklock
cmdisklock(1m)cmdisklock(1m)NAME
cmdisklock - manage Serviceguard cluster lock devices.
SYNOPSIS
cmdisklock check path
cmdisklock [-f] reset path
DESCRIPTION
cmdisklock is a tool to check the current state of a Serviceguard cluster lock device. It can also be used to reset the state of the clus-
ter lock device. The need to reset the cluster lock device state could arise if the cluster lock device is replaced or becomes corrupt.
A cluster lock device can be either an HP-UX LVM cluster lock or a cluster lock LUN device. HP-UX LVM cluster locks exist only on a disk
in an LVM volume group. Cluster lock LUNs exist only on disks dedicated to cluster lock. cmdisklock is useful for checking either type of
cluster lock and for re-initializing cluster lock LUN devices after a failure or corruption.
NOTE
To restore an HP-UX LVM cluster lock, use vgcfgrestore. cmdisklock will fail until vgcfgrestore is run, and cmdisklock is unnecessary as
long as vgcfgbackup was done after the cluster lock was initialized. See the Managing Serviceguard manual for details.
The syntax of the path option depends on the type of lock. For HP-UX LVM cluster lock disks, the syntax is VG:PV (for example:
/dev/vglock:/dev/dsk/c0t0d2). For cluster lock LUN disks, the path is the disk device path. For example, /dev/sdd1 (on Linux) or
/dev/dsk/c0t1d2 (on HP-UX).
Options
cmdisklock supports the following options:
check Check the current state of the cluster lock device and report the results.
reset Reset (initialize) the state of the cluster lock device. This operation should only be performed on a cluster lock
LUN device. For HP-UX LVM cluster lock, use vgcfgrestore as documented in the Managing Serviceguard manual. After
performing a reset, a check can be used to verify that the lock is cleared.
EXAMPLES
If the cluster lock LUN device becomes corrupted and the cluster is up, messages like the following will appear in syslog.
Mar 15 12:20:41 usb cmdisklockd[17599]: WARNING: Cluster lock LUN /dev/dsk/c0t1d2 is corrupt: bad label. Until this situation is cor-
rected, a single failure could cause all nodes in the cluster to crash.
Mar 15 12:20:41 usb cmdisklockd[17599]: After ensuring that all active nodes in the cluster have logged this message, run 'cmdisklock reset
/dev/dsk/c0t1d2' to repair
Mar 15 12:20:41 usb cmdisklockd[17599]: Cluster lock disk /dev/dsk/c0t1d2 is inaccessible
Once the above messages appear in syslog on all running nodes, the following command will re-initialize the cluster lock LUN:
ucd:/> cmdisklock reset /dev/dsk/c0t1d2
WARNING: Cluster lock LUN /dev/dsk/c0t1d2 is corrupt: bad label. Until this situation is corrected, a single failure could cause all nodes
in the cluster to crash.
After ensuring that all active nodes in the cluster have logged this message, run 'cmdisklock reset /dev/dsk/c0t1d2' to repair
/dev/dsk/c0t1d2 is inaccessible
Resetting cluster lock device /dev/dsk/c0t1d2
Cluster lock reset completed
/dev/dsk/c0t1d2 is accessible
cleared
After the lock is restored, a message like the following appears in syslog:
Mar 15 12:23:11 usb cmdisklockd[17599]: Cluster lock disk /dev/dsk/c0t1d2 is accessible
WARNINGS
CAUTION
For cluster lock LUN, reset is a potentially destructive operation. While cmdisklock checks for known volume manager and file system use
(overridden by -f), it does not validate that the device to be reset is actually used by any cluster. If -f is used on the wrong device
file, loss of data may result.
CAUTION
Care should be taken when doing a reset when the cluster is active as there is a remote possibility that the cluster will partition right
when this command is run and both nodes could end up thinking they have successfully acquired the lock. To avoid this situation, make sure
cmcld has logged a message in syslog on all running nodes saying the device is inaccessble, before performing a reset. Note that it is
safe to run cmdisklock when the cluster is down.
RETURN VALUE
cmdisklock returns the following values:
0 Successful completion.
1 The disk is inaccessible or is not recognized as a cluster lock.
AUTHOR
cmdisklock was developed by HP.
SEE ALSO cmapplyconf(1m), cmviewcl(1m), vgcfgbackup(1m), vgcfgrestore(1m)
Requires Optional Serviceguard Software cmdisklock(1m)