Linux on vmware won't boot due to corrupt library file! Post: 302531416

10 More Discussions You Might Find Interesting

1. Solaris

Solaris (9) won't boot!

Hi, I've just bought an Ultra 60 running solaris 9 (or so I've been led to believe). When I start up, it looks for a (presumably) domain/network to hook up to and the following messages are displayed: Boot device: net file and args: Network link setup failed Please check cable and try...

2. Linux

Help! Boot failure - corrupt superblock

Hi everyone, OK, I've made a monumental fsck-up of my linux installation AND I did not backup my data properly (idiot!), so I'm really up the proverbial without a paddle here. Basically the problem is I re-sized my /home partition (hda13) using Partition Magic 8.0, after doing so my mandrake...

3. AIX

server won't boot

Hi all , i was trying to upgrade firmware on machine 7028-6E4 and it failed . Now machine does not boot anymore , i can not get SMC menu either ... What are my options ? Thanks, Rahim

4. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me...

5. UNIX for Dummies Questions & Answers

Library won't load

Trying to run an X11 executable under Darwin, I keep getting: dyld: Library not loaded: /sw/lib/libglib-1.2.0.dylib Referenced from: /usr/X11R6/bin/wav2rsomac Reason: image not found Trace/BPT trap I can't figure out if this is an error in the way the program is running, or if the...

6. Solaris

ultra 10 boot warning---corrupt label

Hi All, Any idea why i'm having this warning during boot: WARNING: /pci@1f,0/pci@1,1/ide@3/dad@1,0 (dad1): corrupt label - wrong magic number This happens after I added another ide HD and reinstall it from solaris 10 to solaris 8. Thanks in advance.

7. UNIX for Dummies Questions & Answers

Linux won't boot

I'm trying to install Fedora 9 on a Dell OptiPlex GX300 machine. The instalation runs properly, but when the computer restarts after the instalation, it simply won't boot, like there's no OS installed. I tried diffrent Linux distributions, but nothing works. This are the partitions, maybe it's...

8. AIX

won't mount /usr...won't boot fully

Hello: NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD...

9. Linux

./configure problem for libsf library due to apparently missing libdb library.

Hello, ./configure script fails to configure libsf. Please check the following last few lines of configure script error. checking for db1/db.h... no checking for db.h... yes checking for dbopen in -ldb1... no configure: error: No libdb? No libsf. But find command shows the following; ...

10. HP-UX

File system full, won't complete boot

Hello, I have a very old hp rp2450 running 11i2 that I had to power off. When turning it back on it hangs with the following message. Would booting into SUM get me any further? I've never used SUM, so I'm asking before I go down that rabbit hole. Thanks for the help. # ## extra content...

LEARN ABOUT DEBIAN

vmxnet

VMXNET(9)							   Open VM Tools							 VMXNET(9)

NAME

       vmxnet - vmware kernel module

SYNOPSIS

       modprobe vmxnet

DESCRIPTION

       This  is  a  Linux  kernel device driver module that drives VMware's fast networking device. As it is backed by real (virtual) hardware, it
       should be automatically loaded by hotplug or udev as needed. For best performance, it is recommended to enable TSO on all interfaces driven
       by vmxnet using ethtool.

       The shell code to do this might look like this:

       if which ethtool >/dev/null 2>&1; then
	  for ethif in `ifconfig -a | grep ^eth | cut -d' ' -f1`; do
	     ethtool -K $ethif tso on >/dev/null 2>&1
	  done fi

       The VMware backend may present the fast networking device as an AMD vlance device instead of the actual vmxnet device.

SEE ALSO

       vmware-checkvm(1)
       vmware-hgfsclient(1)
       vmware-toolbox(1)
       vmware-toolbox-cmd(1)
       vmware-user(1)
       vmware-xferlogs(1)
       libguestlib(3)
       libvmtools(3)
       vmware-guestd(8)
       vmware-hgfsmounter(8)
       vmware-user-suid-wrapper(8)
       vmblock(9)
       vmci(9)
       vmhgfs(9)
       vmmemctl(9)
       vmsock(9)
       vmsync(9)
       vmxnet3(9)

HOMEPAGE

       More information about vmxnet and the Open VM Tools can be found at <http://open-vm-tools.sourceforge.net/>.

AUTHOR

       Open VM Tools were written by VMware, Inc. <http://www.vmware.com/>.

       This  manual  page  was	put  together from homepage materials by Daniel Baumann <daniel.baumann@progress-technologies.net>, for the Debian
       project (but may be used by others).

2010.03.20-243334						    2010-04-08								 VMXNET(9)